GE Universal Remote 24958 User Manual

24958  
Universal Remote  
Instruction Manual  
 
Introduction  
Congratulations.on.your.purchase.of.this.  
24958.Universal.Remote.Control..The.  
24958.is.one.of.the.most.easy.to.use.  
remote.controls.available.today..With.the.  
24958,.juggling.multiple.remote.controls.is.  
a.thing.of.the.past!.Your.24958.controls.up.  
to.6.devices,.including.the.most.popular.  
brands.of.TV,.DVD,.DVR,.Cable,.etc..  
.
In.addition,.this.remote.is.equipped.with.a.  
command.learning.feature,.which.lets.the.  
remote.learn.commands.from.your.original.  
equipment.remote.control!  
Note:.Some.functions.from.your.original.  
remote.may.not.be.controlled.by.this.  
remote..Use.the.original.remote,.if.  
available,.to.control.such.functions..  
Sometimes.buttons.other.than.described.  
in.these.instructions.may.actually.perform.  
the.function..For.example,.the.CHAN.and.  
VOL.buttons.might.be.used.to.navigate.  
through.menu.choices..We.recommend.  
you.experiment.with.the.remote.to.  
identify.if.such.situations.pertain.to.your.  
equipment..  
The.24958.is.easy.to.use,.easy.to.  
program,.and.it.gives.you.total.control—at.  
the.touch.of.your.fingertips!  
3
 
Button Functions  
1.  
27.  
26.  
25.  
24.  
23.  
22.  
21.  
20.  
19.  
18.  
17.  
16.  
15.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
11.  
12.  
13.  
14.  
Note:.The.REC.button.must.be.pressed.twice.to.  
record.from.your.DVD/DVR..For.some.DVD/DVR.  
brands,.you.might.need.to.press.REC button.once,.  
then.press.it.again.for.3.seconds.  
Some.buttons.on.the.remote.might.have.functions.  
that.are.referred.to.by.different.names.on.the.de-  
vice.you.are.controlling..These.differences.depend.  
upon.the.brand.and.model.of.your.product..Also,.  
this.remote.can.only.operate.features.that.exist.on.  
your.product..  
4
 
Button Functions (cont.)  
1. Red Indicator:.Lights.when.any.button.is.pressed.  
2. TV, DVD, DVR, etc.: Selects.the.product.to.be.oper-  
ated.  
3. SETUP: Used.for.setting.up.your.remote.  
4. ABCD: Used.to.store.learned.commands.  
5. MENU: Brings.up.the.device.Menu.screen.(if.  
available).-.use.with.UP,.DOWN,.LEFT,.and.RIGHT  
navigation.buttons.  
6. UP, DOWN, LEFT, RIGHT: Navigation.buttons.  
7. INFO: Displays/selects.on-screen.channel.informa-  
tion,.etc.  
8. ZOOM: Zooms.or.enlarges.a.specific.area.of.the.  
screen..  
9. VOLUME UP/DOWN: Changes.the.volume.level.of.  
the.product,.normally.the.TV.  
10. REPLAY: Replays.the.last.8.seconds.of.a.program.  
11. INPUT: For.some.TVs,.press.repeatedly.to.select.  
from.available.viewing.sources.(antenna,.cable.box,.  
etc.).  
12. PAGE UP/DOWN:.Sets.your.Favorites.ratings.(YES/  
NO).  
13. NUMBERS:.Enter.numbers.for.direct.channel.selec-  
tion..Some.products.require.Enter.to.be.pressed.  
after.channel.selection.  
14. ENTER: Used.after.direct.channel.number.entry.to..  
immediately.change.to.the.selected.channel.  
15. RECORD, PLAY, STOP, REW, FF, PAUSE:..Control.  
buttons.that.operate.your.DVD/DVR.even.when.the.  
remote.is.set.to.operate.the.TV..Also.operates.DVD.  
Scan.-/+.  
16. Dot:.used.for.digital.channels,.e.g.,.2.3.  
17. LAST: Returns.to.the.previously.selected.channel.or.  
DVD.repeat.toggle.  
18. LIVE: Returns.to.live.TV.  
19. MUTE:.Turns.off.the.TV.sound.while.the.picture.  
remains.  
20. CHANNEL UP/DOWN:.Changes.the.channels..Also.  
controls.DVD/CD.CHAPTER.+/-.track.selection,.  
i.e.,.DVD/CD.Track.Skip.Up/Down..Note.the.DVR  
buttons.also.control.the.DVD.when.in.DVD.Mode.  
21. BACKLIGHT: Turns.backlighting.On/Off.  
22. DVR LIST:.Press.to.display.list.of.recorded.shows.  
on.your.DVR.  
23. GUIDE: Displays.satellite.or.cable.on-screen.pro-  
gram.guide.  
24. OK: Selects.menu.items.for.the.device.you.are.con-  
trolling..  
25. EXIT: Exits.on-screen.menus,.returns.to.previous.  
on-screen.selection.  
26. LEARN: Used.to.setup.learning.functions.  
27. POWER: Turns.device.on.or.off.  
5
 
Initial Setup  
Battery Installation  
1.. On.the.back.of.the.remote,.push.down.on.the.  
tab.and.lift.the.cover.off.  
2.. Match.the.batteries.to.the.+.and.-.marks.inside.  
the.battery.case,.then.insert.2.AAA.Alkaline.  
batteries.  
3.. Press.the.battery.cover.back.into.place.  
Battery Saver  
Your.remote.automatically.turns.off.if.the.buttons.  
are.depressed.more.than.30.seconds..This.will.  
save.your.batteries.should.your.remote.get.stuck.in.  
a.place.where.the.buttons.remain.depressed.(e.g.,.  
or.for.instance,.between.the.sofa.cushions).  
Code Saver  
Codes.are.stored.in.permanent.memory.while.you.  
are.changing.batteries.so.that.you.will.not.lose.any.  
codes.stored.in.the.remote.while.you.are.changing.  
batteries..  
Code Setup  
The.SETUP.button.is.used.to.setup.the.remote..  
You.can.either.setup.the.remote.using.the.code.  
for.your.brand.of.product,.from.the.code.tables.(on.  
separate.sheet),.or.you.can.search.through.the.  
library.of.codes.until.you.find.a.code.that.works.for.  
your.product.  
Please.refer.to.“Code.Search”.on.page.8.for.more.  
information.on.using.the.code.search.feature.to.  
learn.how.to.search.through.the.library.of.codes.for.  
your.products.  
6
 
Direct Code Entry  
Direct Code Entry  
NOTE:.You.can.store.any.kind.of.code.under.any.  
mode.(except.TV)..I.E..you.can.store.a.VCR.code.  
under.the.CBL button,.or.a.DVD.code.under.the.  
AUX button,.etc..However,.you.can.only.store.TV.  
codes.under.the.TV button.  
1....Press.and.hold.the.SETUP button.until.the.red.  
indicator.stays.on,.then.release.the SETUP  
button.  
2....Press.and.release.the.desired.mode.button.  
(TV, DVD,.etc.)..The.red.indicator.blinks,.then.  
stays.lit...  
3.. Enter.the.4.digit.code.from.the.code.tables.(on.  
separate.sheet)..Note:.after.a.valid.code.entry,.  
the.red.indicator.turns.off...For.an.invalid.code,.  
the.red.indicator.flashes.  
4.. With.your.device.on,.press CHANNEL UP (or  
POWER)..If.the.device.responds,.no.further.  
programming.is.required..Note:.If.some.buttons.  
do.not.operate.your.equipment,.try.one.of.the.  
other.codes.for.your.brand.  
Write.your.codes.down.here.for.easy.reference.  
later.  
Type  
TV  
Type stored  
TV  
Code  
DVD  
DVR  
CBL  
AMP  
AUX  
7
 
Code Search  
Code Search  
If.your.product.does.not.respond.after.you.have.  
tried.all.the.codes.for.your.brand,.or.if.your.brand.is.  
not.listed,.try.searching.for.your.code.by.following.  
these.steps.  
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.  
be.controlled.  
2.. Press.and.hold.the.SETUP button.until.the.red.  
indicator.stays.on,.then.release.the.SETUP  
button.  
3...Press.and.quickly.release.the.desired.mode.  
button.(TV,.DVD,.etc.)..The.red.indicator.blinks.  
off.once.  
4.. Press.the.CHANNEL UP.button.repeatedly.(up.  
to.300.times).until.the.device.to.be.controlled.  
changes.channel..The.red.indicator.blinks.off.  
with.each.button.press..If.you.accidentally.  
overshoot.the.code.required,.press.the.  
CHANNEL DOWN button.to.backtrack.through.  
the.library.until.the.device.changes.channel..  
Pressing.CHANNEL UP.changes.direction.to.  
forward.again..  
5.. Press.and.release.ENTER to.install.the.code..  
.
Most.users.store.DVD.codes.under.DVD..Cable.  
codes.appear.under.CBL,.etc..If.you.want.to.store.  
a.Satellite.code.under.CBL,.for.example,.first.fol-  
low.the.procedure.for.Direct.Code.Entry.and.select.  
CBL in.Step.2.of.Direct.Code.Entry..Then.enter.  
any.Satellite.code.in.Step.3.of.Direct.Code.Entry..  
Then.follow.the.steps.above.for.Code.Search..  
Note:..Code.Search.starts.from.the.currently.  
stored.4.digit.number.under.that.mode..Sometimes.  
the.first.code.that.“works”.with.your.device.may.  
only.allow.limited.functionality.(e.g..the.MENU  
button.might.not.work)..There.may.be.a.code.  
that.performs.more.functions..Continue.the.code.  
search.process.until.the.best.code.is.found.  
8
 
Code Identification Feature  
Code Identification Feature  
The.Code.Identification.Feature.allows.you.to.  
identify.the.4.digit.library.code.stored.under.your.  
device.key..For.example,.if.you.want.to.find.out.  
what.4.digit.code.is.stored.under.your.TV.device.  
key,.follow.the.six.steps.below:  
1.. Press.and.hold.the.SETUP button.until.the.red.  
indicator.stays.on..Release.the SETUP button.  
2.. Press.and.release.the.desired.mode.button.  
(TV,.DVD,.etc.)..The.red.indicator.blinks,.then.  
stays.lit...  
3.. Press.and.release.the.SETUP button..The.red.  
indicator.blinks.off.  
4.. To.find.the.first.digit.for.the.code.stored.under.  
the.mode.key.pressed.in.step.2,.press.each.  
numeric.key.from.0-9.in.turn..When.the.red.  
indicator.blinks.off.the.number.you.pressed.is.  
the.first.digit.for.the.code.you.are.searching.for.  
5.. To.find.the.second.digit,.repeat.step.4,.this.  
time.when.the.red.indicator.blinks.off.this.is.the.  
second.digit.  
6.. Repeat.step.4.to.find.the.third.and.fourth.digits.  
9
 
Setup  
Programming Combo Device Codes  
Some.combo.(combination).devices.(TV/DVR,.TV/  
DVD,.DVD/DVR,.etc.).require.you.to.set.up.2.dif-  
ferent.modes.to.control.both.parts.of.the.combo..  
For.example,.if.you.have.a.TV/DVD.combo,.you.  
might.need.to.set.up.one.code.under.the.TV mode.  
to.control.the.TV.and.a.separate.code.(under.other.  
modes).to.control.the.DVD..  
DVD/DVR Punch-Through Feature  
This.remote.allows.the.6.DVD/VCR.transport.  
buttons.(i.e..PLAY,.PAUSE,.STOP,.FF,.REWIND,.  
and.REC).to.Punch-through.from.any.Mode.  
programmed.with.TV,.SAT.or.Cable.codes.to.the.  
last.DVD,.or.VCR.programmed.Mode.you.used,.  
i.e.,.the.transport.keys.control.your.DVD.or.VCR.  
player.even.when.you.are.in.TV,.SAT.or.Cable.  
mode..If.you.use.a.SAT/DVR,.Cable/DVR,.etc.,.you.  
may.want.to.disable.this.Punch-through.feature.  
to.allow.the.transport.keys.to.control.your.DVR.  
device..The.following.steps.will.disable.the.punch-  
through.feature:.  
1.. Press.and.hold.SETUP until.the.red.indicator.  
stays.on,.then.release.the.SETUP button..  
2.. Press.and.hold.PAUSE until.the.red.indicator.  
turns.off,.then.release.the.PAUSE button..The.  
PAUSE button.needs.held.for.about.3.seconds.  
before.the.red.indicator.turns.off..  
The.punch-through.feature.can.be.enabled.again.  
by.repeating.the.above.steps.  
Volume/Mute Control and Punch-  
Through Feature  
Your.remote.allows.you.to.select.which.device.  
mode.controls.VOLUME.and.MUTE..This.remote.  
is.initially.set.for.all.device.modes.to.use.their.own.  
Volume/Mute.control.if.present..  
If.the.programmed.code.does.not.have.Volume/  
Mute.operation,.then.VOLUME.and.MUTE will.  
“punch-through”.(hand-over).control.to.the.TV-  
mode.device.without.you.needing.to.change.to TV.  
mode..Note: Any.mode.chosen.for.Volume/Mute.  
control.must have.its.own.Volume/Mute.function.or.  
else.VOLUME and.MUTE will.not.function.  
10  
 
Setup (cont.)  
Setting ALL Volume/Mute Controls to  
Any Mode  
You.can.set.all.modes.to.“punch-through”.to.any.  
mode.for.Volume/Mute.control.without.needing.to.  
change.to.that.mode.by.doing.the.following.  
1...Press.and.hold.SETUP until.the.indicator.  
remains.on,.then.release.SETUP.  
2...Press.and.hold.MUTE.until.the.indicator.blinks.  
off,.then.release.the.button.  
3...Press.and.release.SELECT to.select.the.  
desired.mode.(TV,.DVD,.etc.).for.Volume/Mute.  
control;.the.indicator.blinks,.then.stays.on.  
4...Press.and.release.MUTE;.the.indicator.turns.  
off..Note: The.indicator.will.blink.rapidly.for.3.  
seconds.if.the.mode.you.have.selected.does.  
not.have.Volume/Mute.control..  
5...All.other.modes.will.now.“punch-through”.to.  
your.chosen.mode.for.Volume/Mute.control.  
Setting Any Mode to Use its Own  
Volume/Mute Control  
You.can.set.any.mode.to.use.only.its.own.Volume/  
Mute.control..  
Note:.If.your.chosen.mode.does.not.have.Volume/  
Mute.functions,.then.this.remote’s.VOLUME and.  
MUTE.will.not.operate.  
1...Press.and.hold.SETUP until.the.indicator.  
remains.on,.then.release.SETUP.  
2...Press.and.hold.MUTE.until.the.indicator.blinks.  
off,.then.release.the.button.  
3...Press.and.release.SELECT to.select.the.  
desired.mode.(TV,.DVD,.etc.);.the.indicator.  
blinks,.then.stays.on.  
4...Press.and.release.VOLUME-.(down);.the.  
indicator.blinks,.then.stays.on.  
5...Press.and.release.MUTE;.the.indicator.turns.  
off..  
6...All.modes.will.now.“punch-through”.to.the.  
respective.modes.you.have.chosen.for.Volume/  
Mute control.  
11  
 
Code Learning  
commands.  
g. Place.the.original.remote.end-to-end.with.the.  
Learning.Remote.so.the.IR.transmitters.on.both.  
remotes.are.directly.in.line.with.each.other..You.  
may.need.to.adjust.the.height.of.either.remote.  
to.achieve.this..Use.the.IR.Transmitter.Finder.  
feature.to.assist.you.  
h. Keep.the.distance.between.the.two.remotes.  
to.approximately.1.inch.and.do.not.move.or.  
change.the.distance.between.the.two.remotes.  
until.you.have.learned.all.the.required.buttons.  
for.that.Mode.  
i. When.Learning,.do.not.release.the.button.being.  
Learned.until.the.red.indicator.has.blinked.off.  
for.half.a.second.  
j. Avoid.learning.your.original.remote.Volume/  
Mute.buttons.unless.you.are.sure.these.operate.  
the.same.device.e.g..some.original.DVD.  
remotes.include.TV.Volume/Mute.button.control.  
and.can.be.two.different.types.of.code.  
k. Avoid.learning.your.original.remote.DVD.  
transport.buttons.unless.you.are.sure.these.  
operate.the.same.device.e.g..some.original.TV.  
remotes.include.DVD.button.control.and.can.be.  
two.different.types.of.code.  
l. If.learning.the.first.or.second.buttons.for.a.  
Mode.results.in.continuous.errors.then.try.the.  
following:  
i.....End.the.Learn.session.by.pressing.the.SETUP  
button.  
ii....Clear.out.the.learned.commands.for.that.Mode.  
iii...Check.the.IR.transmitters.are.correctly.  
aligned.between.the.two.remotes.(use.the.IR.  
Transmitter.Finder.facility).  
iv...Adjust.the.distance.between.the.two.remotes.  
to.be.closer.(e.g..half.an.inch).or.a.further.away.  
(e.g..2.inches).from.each.other.  
v... Try.learning.the.original.remote.for.that.Mode.  
again.  
If.problems.reoccur.with.the.same.button.check.  
the.original.remote.button.being.learned.–.does.it.  
transmit?.Does.it.operate.the.target.device?..Try.  
learning.that.button.under.a.different clear.Mode...  
If.it.learns.okay.then.it.is.likely.to.be.a.different.  
code.type.from.the.others.and.cannot.be.learned.  
under.the.same.Mode.  
12  
 
Tips On Learning (cont.)  
The.learning.feature.lets.you.“learn”.functions.  
from.your.original.remote.control..For.example.  
-.you.may.want.to.use.your.remote.to.operate.  
the.RANDOM.PLAY.feature.from.your.original.  
CD.remote.control..This.remote.is.equipped.with.  
an.“easy.learning”.feature.that.lets.you.“learn”.  
features.(such.as.RANDOM.PLAY.from.your.  
original.CD.remote).  
Tips on Learning  
You.can.only.learn.one.device.type.under.any.one.  
Mode.button.e.g..only.learn.TV.codes.under.the.  
TV Mode,.DVD.codes.under.the.DVD Mode,.etc..If.  
you.are.trying.to.learn.from.a.“Universal”.remote,.it.  
might.have.more.than.one.code.type.stored.under.  
a.Mode..Try.learning.from.another.remote.to.see.if.  
there’s.a.problem.with.the.type.or.brand.of.remote.  
you.are.trying.to.learn.from..  
a. Some functions from some types of remotes  
might not be able to be learned.  
b. No functions may be stored under LEARN,  
SETUP, or BACKLIGHT buttons.  
c. Only one original device type can be learned  
per individual Mode.  
d. Use.fresh.batteries.for.both.the.Learning.  
Remote.and.the.Original.Remote.  
e. Keep.at.least.three.feet.away.from.  
incandescent.or.low-energy.lights.when.  
learning.  
f. Perform.a.Master.Clear.(see.page.16).before.  
learning.and.try.learning.2.or.3.commands.  
initially..Then.carry.out.a.Master.Clear.before.  
completely.learning.your.original.remote’s.  
13  
 
IR Transmitter Finder  
This.feature.assists.you.in.identifying.where.your.  
original.remotes.IR.transmitter.is.located.and.  
is.particularly.useful.if.your.original.remote’s.IR.  
transmitter.is.hidden.behind.a.lens..  
1...Point.both.remotes.facing.each.other.by.  
approximately.1.inch.apart.(see.Tips.on.  
Learning.on.previous.pages).  
2...Press.and.hold.the.SETUP button.until.the.red.  
indicator.turns.on,.then.release.the.button.  
3...Press.and.release.the.desired.Mode.button.(TV,.  
DVD,.etc.),.the.red.indicator.blinks.then.stays.  
on.  
4...Press.and.release.the.LEARN button,.the.red.  
indicator.blinks.then.stays.on..  
5...Press.and.hold.any.Original Remote button.  
and.move.the.Original Remote.to.the.left.  
and.right,.and/or,.up.and.down.in.front.of.  
the.Learning.remote.IR.transmitter...The.  
red.indicator.will.remain.on.if.no.IR.from.the.  
Original.remote.is.found.and.the.red.indicator.  
will.blink.on.and.off.more.rapidly.when.the.IR.  
transmitters.are.lining.up...The.point.where.the.  
red.indicator.blinks.most.rapidly.is.where.the.  
two.IR.transmitters.are.aligned...Note.some.  
original.remotes.will.only.transmit.IR.on.the.  
initial.button.press.then.stop...In.these.cases,.  
quickly.press.and.release.the.original.remote.  
button.repeatedly.during.this.procedure.  
6...You.can.now.learn.a.button.from.your.original.  
remote.by.continuing.from.“Step 4”.in.the.  
Learning Commands”.section.on.the.next.  
page,.or,.to.exit.at.this.point,.press.and.release.  
the.SETUP button  
14  
 
Learning Commands  
1...Press.and.hold.the.SETUP button.until.the.red.  
indicator.turns.on,.then.release.the.button.  
2...Press.and.release.the.desired.mode.button.  
(TV,.DVD,.etc.),.the.red.indicator.blinks.then.  
stays.on.  
3...Press.and.release.the.LEARN button,.the.red.  
indicator.blinks.then.stays.on..  
4...Press.and.release.the.Learning Remote button.  
that.you.want.to.teach.(e.g..POWER).  
5...Point.both.remotes.facing.each.other.by.ap-  
proximately.1.inch.apart.(see.tips.on.page.12).  
6...Press.and.hold.the.Original Remote button.  
(e.g..Power).until.the.red.indicator.blinks.once.  
and.stays.on..If.there.is.a.learning.problem,.the.  
indicator.blinks.for.three.seconds.and.stays.on..  
If.this.happens,.repeat.Steps.4.to.6.  
7...Repeat.Steps.4-6.for.other.buttons.you.want.to.  
learn.  
8...Press.and.release.the SETUP button.when.all.  
desired.remote.commands.are.learned..Code.  
Learning.is.now.complete.  
4.  
1.  
3.  
2.  
Line up your remotes (that you’re learning from)  
in front of the learning remote on a hard surface  
approx. 1-inch apart.  
6.  
15  
 
Clearing Commands  
To Clear all Learned Commands under  
a mode  
1.. Press.and.hold.the.SETUP button.until.the.red.  
indicator.turns.on..Release.the.SETUP button.  
2.. Press.and.release.the.button.for.the.mode.you.  
want.to.clear.(TV,.DVD,.etc.)..The.red.indicator.  
blinks.off.  
3.. Press.and.release.the.LEARN button.TWICE...  
The.red.indicator.blinks.off.  
4.. Press.and.release.the.SETUP button..The.red.  
indicator.turns.off..All.learned.Commands.under.  
that.mode.are.now.cleared.  
Master Clear - To Clear all Learned  
Commands under all modes  
1.. Press.and.hold.the.SETUP button.until.the.red.  
indicator.turns.on..Release.the.SETUP button.  
2.. Press.and.release.the.LEARN button.TWICE..  
The.red.indicator.blinks.off.  
3.. Press.and.release.the.SETUP button..The.red.  
indicator.turns.off..All.Learned.commands.in.the.  
remote.are.now.cleared.  
16  
 
Troubleshooting  
Remote does not operate your product  
1.. Select.the.mode.for.the.product.you.want.to.  
control.  
2.. Program.the.remote.with.a.new.code.  
3.. Install.new.batteries.in.the.remote..(You.might.  
have.to.reprogram.your.remote.after.installing.  
new.batteries.)  
4.. If.these.steps.do.not.work,.the.remote.might.not.  
be.compatible.with.your.product.  
Remote does not operate some  
features of your product  
1.. Program.remote.with.a.new.code.  
2.. If.this.does.not.work,.your.remote.might.not.be.  
able.to.operate.all.features.of.your.product.or.  
the.button.names.might.be.different.than.your.  
product.  
Indicator blinks after you program a  
product code  
1.. This.means.the.remote.did.not.accept.the.code.  
2.. Try.to.program.the.code.again.or.try.a.different.  
code.  
Lost Your Codes?  
Enclosed.with.this.remote.is.a.sticker.on.which.  
you.should.write.the.codes.for.each.device.you.  
programmed..Apply.the.sticker.to.the.back.of.  
the.remote.or.somewhere.convenient.for.future.  
reference.  
Also.on.the.sticker.is.our.website.address.which,.  
should.you.lose.your.codes.or.programming.  
instructions,.you.can.find.available.on.our.website:  
www.jascoproducts.com  
17  
 
90 Day Limited Warranty  
Jasco.Products.Company.warrants.this.product.  
to.be.free.from.manufacturing.defects.for.a.period.  
of.ninety.days.from.the.original.date.of.consumer.  
purchase...This.warranty.is.limited.to.the.repair.  
or.replacement.of.this.product.only.and.does.not.  
extend.to.consequential.or.incidental.damage.to.  
other.products.that.may.be.used.with.this.unit...  
This.warranty.is.in.lieu.of.all.other.warranties.  
express.or.implied...Some.states.do.not.allow.  
limitations.on.how.long.an.implied.warranty.lasts.  
or.permit.the.exclusion.or.limitation.of.incidental.or.  
consequential.damages,.so.the.above.limitations.  
may.not.apply.to.you...This.warranty.gives.you.  
specific.rights,.and.you.may.also.have.other.rights.  
that.vary.from.state.to.state....If.unit.should.prove.  
defective.within.the.warranty.period,.return.prepaid.  
with.dated.proof.of.purchase.to:  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK..73114-2205  
18  
 
19  
 
......24958  
Universal Remote  
Instruction Manual  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK..73114-2205  
Made.in.China. ..................................24958-1/10  
 

Edimax Technology Network Card PS 3103P User Manual
Electro Voice Speaker System Force i User Manual
Excalibur electronic Games SF20 2 User Manual
Fellowes Typewriter PB 300 User Manual
GE Dishwasher GHD5015 User Manual
GE Freezer FUF17SVR User Manual
GE Microwave Oven 340135 User Manual
GE Monogram Beverage Dispenser Wine Chiller Wine Reserve and Beverage Center User Manual
GE Monogram Refrigerator ZISS480DRSS User Manual
Genesis Advanced Technologies Cordless Saw GMSUDR15L User Manual