Euro Pro Lawn Sweeper V1730 User Manual

Style # XSY1730  
Style # XSY1730  
for Model V1730 Sweeper  
for Model V1730 Sweeper  
Service Pack Contains:  
1 Replacement Brush Roll  
1 Squeegee  
1 Gear Box With Side Sweeper  
1 Battery Pack 8.4V dc  
Service Pack Contains:  
1 Replacement Brush Roll  
1 Squeegee  
1 Gear Box With Side Sweeper  
1 Battery Pack 8.4V dc  
Changing the Rotating Brush, Gear Box & Squeegee  
Changing the Rotating Brush, Gear Box & Squeegee  
WARNING: Use caution when changing the rotating brush, gear box and  
squeegee so that the unit does not turn ON when pressing  
down on the sweeper power head.  
WARNING: Use caution when changing the rotating brush, gear box and  
squeegee so that the unit does not turn ON when pressing  
down on the sweeper power head.  
1. Remove the extension tube from the sweeper power  
head.  
2. Turn sweeper power head upside down being careful  
Not to accidentally turn the unit ON.  
3. Remove the transparent brush cover. (Fig. 1) (Refer to  
your owner's manual for detailed instructions.)  
4. Push in on the locking tab of the gear box and lift gear  
box to remove. (Fig. 2 & Fig. 3)  
1. Remove the extension tube from the sweeper power  
head.  
2. Turn sweeper power head upside down being careful  
Not to accidentally turn the unit ON.  
3. Remove the transparent brush cover. (Fig. 1) (Refer to  
your owner's manual for detailed instructions.)  
4. Push in on the locking tab of the gear box and lift gear  
box to remove. (Fig. 2 & Fig. 3)  
5. Lift the brush bar end cap up from the slot. (Fig. 4)  
6. Lift the brush bar out from the bushing and slip off the  
Fig. 1  
5. Lift the brush bar end cap up from the slot. (Fig. 4)  
6. Lift the brush bar out from the bushing and slip off the  
Fig. 1  
Locking  
belt to remove the brush bar. (Fig. 5)  
Locking  
tab  
Gear box  
tab  
belt to remove the brush bar. (Fig. 5)  
7. Insert the new brush bar by first inserting the brush bar  
into the bushing on the end opposite the driver belt.  
(Fig. 5)  
Gear box  
7. Insert the new brush bar by first inserting the brush bar  
into the bushing on the end opposite the driver belt.  
(Fig. 5)  
8. Slip the belt over the brush bar cap.  
8. Slip the belt over the brush bar cap.  
9. Insert the brush bar into the slot. (Fig. 4)  
10. Insert the gear box tabs into the tab slots and push  
down until it clicks into place.  
11. To remove the squeegee, follow instructions above for  
removing the gear box and pull the squeegee out from  
the clips. (Fig. 6) To replace the squeegee, press the  
new one back into the clips.  
9. Insert the brush bar into the slot. (Fig. 4)  
10. Insert the gear box tabs into the tab slots and push  
down until it clicks into place.  
11. To remove the squeegee, follow instructions above for  
removing the gear box and pull the squeegee out from  
the clips. (Fig. 6) To replace the squeegee, press the  
new one back into the clips.  
Fig. 2  
Fig. 2  
Gear box  
tabs  
Gear box  
tabs  
Lift  
Lift  
Fig. 3  
Fig. 4  
Fig. 5  
Fig. 6  
Fig. 3  
Fig. 4  
Fig. 5  
Fig. 6  
 

Extron electronic Home Theater System MLC 206 User Manual
Extron electronic Network Card AC AAP User Manual
Faber Ventilation Hood 630001087 User Manual
Fagor America Electric Pressure Cooker U40A01911 User Manual
Fisher Paykel Cooktop CG365DW User Manual
Franklin Industries LLC Ice Maker fim35 User Manual
Fujitsu Air Conditioner fujitsu air conditioner concealed ceiling type User Manual
GE Freezer FCM7SU User Manual
GE Waffle Iron 840176200 User Manual
Gianni Industries Door 10010ST User Manual