Craftsman Cordless Telephone 16278350 User Manual

5. Slots and openings in the cabinet back or bottom are provided for  
ventilation, to protect it from overheating. These openings must  
not be blocked or covered. The openings should never be  
blocked by placing the product on the bed, sofa, rug, or other  
similar surface. This product should not be placed in a built-in  
installation unless proper ventilation is provided.  
11. Do not store this product, or the battery(ies) provided with or  
identified for use with this product, in high-temperature areas.  
Batteries that are stored in a freezer or refrigerator for the  
purpose of extending shelf life should be protected from  
condensation during storage and defrosting. Batteries should be  
stabilized at room temperature prior to use after cold storage.  
Your Call Waiting Caller ID phone stores and displays  
specific information, provided by your local telephone  
company, to subscribers of Caller ID or similar caller  
identification services.  
User Instructions  
SWITCHING BATTERY PACKS  
RINGER TONE  
HANDSET, BASE AND REMOTE  
CHARGER LAYOUT  
The battery packs are interchangeable. While one battery  
pack is charging, the other is in use.To remove the battery  
pack from the handset, push in on the tabs and pull.To  
attach the battery pack to the handset, snap the battery  
pack onto the bottom of the handset.  
You may choose from three different ringer tones.  
1. Press the program/flash button until RINGERTONE  
shows in the display. 1 is the default setting.  
Your Call Waiting Caller ID phone allows you to:  
View the name and telephone number of a caller.  
Identify callers before you answer the phone.  
View the time and date of each incoming call.  
Store up to 40 Caller ID records sequentially.  
2. Use the cid/vol (+/> or -/<) buttons or the handset  
touch-tone pad to move the arrow to 1, 2 or 3.  
6. This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the  
type of power supply to your home, consult your dealer or local  
power company.  
12. If your product uses rechargeable battery(ies), charge the  
battery(ies) only in accordance with the instructions and  
limitation specified in the User Manual.  
Shop Phone  
Model 27413  
Display  
INSTALLING THE PHONE  
3. Press program/flash to store selection.  
cid/ vol (+/ > or -/ <)  
buttons  
EQUIPMENT APPROVAL INFORMATION  
Your telephone equipment is approved for connection to the Public  
Switched Telephone Network and is in compliance with parts 15 and  
68, FCC Rules and Regulations and the Technical Requirements for  
Telephone Terminal Equipment published by ACTA.  
7. Do not allow anything to rest on the power cord. Do not locate  
this product where the cord will be abused by persons walking  
on it.  
CALL BACK/  
TALK button  
TONE/ PULSE DIALING  
Set your phone according to the type of service you are  
subscribed to.  
Know who is calling while you are on the phone or  
when you are away.  
CATLLABLAKCK  
FORMAT  
Screen unwanted calls, eliminate harassment from  
annoying calls, or to get prepared before answering a call.  
8. Do not overload wall outlets and extension cords as this can  
result in the risk of fire or electric shock.  
1. Press the program/flash button until 1TONE 2PULSE  
shows in the display.  
abc  
def  
1
2
3
6
# pause button  
FORMAT button  
redial button  
ghi  
jkl  
mno  
4
7
5
To get the most from your new phone, we suggest that  
you take a few minutes right now to read through this  
user's guide.  
9. Never push objects of any kind into this product through cabinet  
slots as they may touch dangerous voltage points or short out  
parts that could result in a risk of fire or electric shock. Never  
spill liquid of any kind on the product.  
pqrs  
tuv  
wxyz  
1
Notification to the Local Telephone Company  
8
9
#
exit  
tone  
oper  
pause  
0
2. Use the cid/vol (+/> or -/<) buttons or the handset  
touch-tone pad to select 1TONE if you have touch-tone  
service or 2PULSE if you have rotary service.  
*
On the bottom of this equipment is a label indicating, among other  
information, the US number and Ringer Equivalence Number (REN)  
for the equipment. You must, upon request, provide this  
information to your telephone company.  
redial  
ringer  
memory  
memory button  
delete/channel  
program/flash  
IMPORTANT: In order to use all of the Caller ID  
features of this phone, you must subscribe to either  
the standard Name/ Number Caller ID Service or Call  
Waiting Caller ID Service. To know who is calling while  
you are on the phone, you must subscribe to Call  
Waiting Caller ID Service.  
program/ flash  
button  
10. To reduce the risk of electric shock, do not disassemble this  
product, but take it to a qualified serviceman when service or  
repair work is required. Opening or removing covers may expose  
you to dangerous voltages or other risks. Incorrect reassembly  
can cause electric shock when the telephone equipment is  
subsequently used.  
3. Press program/flash to store selection.  
delete/ channel  
button  
The REN is useful in determining the number of devices you may  
connect to your telephone line and still have all of these devices  
ring when your telephone number is called. In most (but not all)  
areas, the sum of the RENs of all devices connected to one line  
should not exceed 5. To be certain of the number of devices you  
may connect to your line as determined by the REN, you should  
contact your local telephone company.  
Battery pack  
ringer button  
CATLLABLAKCK  
FORMAT  
DEFAULT SETTING  
You may use the factory default settings or your  
own settings.  
abc  
jkl  
def  
1
2
5
8
3
6
IMPORTANT: Because cordless phones operate on  
electricity, you should have at least one phone in your  
home that isnt cordless, in case the power in your  
home goes out.  
ghi  
mno  
4
7
page button  
antenna  
pqrs  
tuv  
wxyz  
9
#
11. Do not expose the product to extreme temperatures such as  
areas near a hot radiator or stove or in a hot car.  
exit  
tone  
oper  
pause  
1. Press the program/flash button until DEFAULT shows in  
the display, NO is the default setting.  
0
*
ringer  
redial  
memory  
CONNECTING THE TELEPHONE LINE  
1. Connect one end of the telephone line cord to the LINE  
jack on the bottom of the base.  
p
a
g
e
delete/channel  
program/flash  
in use/ page  
indicator  
A plug and jack used to connect this equipment to the premises  
wiring and telephone network must comply with the applicable  
FCC Part 68 rules and requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is provided with this  
product. It is designed to be connected to a compatible modular  
jack that is also compliant. See installation instructions for details.  
12. Do not place lighted candles, cigarettes, cigars, etc., on the  
telephone.  
2. Use the cid/vol (+/> or -/<) buttons or the handset  
touch-tone pad to select NO to use your settings or  
YES to restore the factory default settings.  
Caution:  
Risk of electric shock  
Do not open  
13. Never touch uninsulated telephone wires or terminals unless the  
telephone line has been disconnected at the network interface.  
2. Connect the other end of the telephone line cord to a  
telephone jack on the wall.  
The exclamation  
point within the  
triangle is a warning  
sign alerting you of  
important  
The lightning flash  
and arrow head  
Caution: To reduce the risk of  
electric shock, do not remove  
3. Press program/flash to store selection.You will hear a  
confirmation tone.  
telephone jacks  
14. Never install or modify telephone wiring during a lightning storm.  
within the triangle is cover (or back). No user  
3. Raise the antenna on the base.  
a warning sign  
alerting you of  
serviceable parts inside. Refer  
servicing to qualified service  
personnel.  
Warning:To prevent  
Notes  
15. Never install telephone jacks in wet locations unless the jack is  
specifically designed for wet locations.  
instructions  
fire or electrical shock “dangerous voltage”  
This equipment may not be used on coin service provided by  
the telephone company.  
accompanying the  
product.  
inside the product.  
hazard, do not  
expose this product  
to rain or moisture.  
CONNECTING THE AC (ELECTRICAL)  
POWER  
1. Plug the base into an electrical outlet.  
Battery charge cradle  
Handset charge cradle  
TELEPHONE OPERATION  
HANDSET REGISTRATION  
The handset is pre-registered. If your handset is not  
registered, follow these steps:  
16. Use caution when installing or modifying telephone lines to  
prevent electrical shock and/or fire.  
See marking on bottom  
/
Back of product  
Party lines are subject to state tariffs, and therefore, you may  
not be able to use your own telephone equipment if you are on  
a party line. Check with your local telephone company.  
17. Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
2. Place the remote charger on a flat surface. Plug the  
power supply into an electrical outlet.  
BEFORE YOU BEGIN  
Notice must be given to the telephone company upon  
A. When the power supply cord or plug is damaged or frayed.  
B. If the product has been exposed to rain or water.  
permanent disconnection of your telephone from your line.  
Allow the system to charge for 16 hours prior to first use.  
If you don’t properly charge the phone, battery  
performance is compromised.  
1. Make sure the phone is OFF (not inTALK mode).  
If your home has specially wired alarm equipment connected to  
the telephone line, ensure the installation of this product does  
not disable your alarm equipment. If you have questions about  
what will disable alarm equipment, consult your telephone  
company or a qualified installer.  
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.  
PARTS CHECKLIST  
Make sure your package includes the items shown here.  
C. If the product does not operate normally by following the  
operating instructions.  
2. Press and hold the format button on the handset until  
you hear a beep and PRESS AND HOLD BASE PAGE KEY  
shows in the handset's display.  
D. If the product's cabinet has been damaged.  
INSTALLING THE BATTERY PACK  
1. Detach the battery pack from the handset by pressing  
the side tabs.  
3. Move the handset close to the base.  
4. Press and hold the base page button.  
E. If the product exhibits a distinct change in performance.  
2 Rights of theTelephone Company  
WARRANTY  
18. Avoid using a telephone (other than a cordless type) during an  
electrical storm. There may be a remote risk of electric shock  
from lightning.  
Should your equipment cause trouble on your line which may harm  
the telephone network, the telephone company shall, where  
practicable, notify you that temporary discontinuance of service may  
be required. Where prior notice is not practicable and the  
circumstances warrant such action, the telephone company may  
temporarily discontinue service immediately. In case of such  
temporary discontinuance, the telephone company must: (1) promptly  
notify you of such temporary discontinuance; (2) afford you the  
opportunity to correct the situation; and (3) inform you of your right to  
bring a complaint to the Commission pursuant to procedures set forth  
in Subpart E of Part 68, FCC Rules and Regulations.  
The telephone company may make changes in its communications  
facilities, equipment, operations or procedures where such action is  
required in the operation of its business and not inconsistent with FCC  
Rules and Regulations. If these changes are expected to affect the  
use or performance of your telephone equipment, the telephone  
company must give you adequate notice, in writing, to allow you to  
maintain uninterrupted service.  
AC Power supply cord  
Charge indicators  
CATLLABLAKCK  
FORMAT  
NOTE: You must press the page button on the base  
within 30 seconds to continue registration.  
abc  
jkl  
def  
1
2
5
8
3
6
page  
ghi  
mno  
4
7
pqrs  
tuv  
wxyz  
9
#
2. Remove the "Prior to Use" tag.  
exit  
tone  
oper  
pause  
0
*
ONE-YEAR FULL WARRANTY  
redial  
ringer  
memory  
delete/channel  
program/flash  
19. Do not use the telephone to report a gas leak in the vicinity of  
the leak.  
3. Re-attach the battery pack to the handset.  
IMPORTANT INSTALLATION  
INFORMATION  
5. You will hear a confirmation tone when the registration  
is complete, and the handset's display shows  
REGISTERED.  
If this Craftsman Shop Phone is defective in material or workmanship  
within one year from the date of purchase, RETURN IT TO YOUR  
NEAREST SEARS STORE in the United States, and it will be replaced  
free of charge. The batteries supplied with this phone are expendable  
parts not covered by this warranty. This warranty gives you specific  
legal rights, and you may also have other rights which vary from state  
to state.  
4. Place the handset in the charge cradle on the remote  
charger and charge for 16 hours prior to first use.  
Remote charger  
with battery pack  
Handset with  
battery pack  
Base unit Telephone  
line cord  
20. Do not place this product on an unstable cart, stand or table. The  
product may fall, causing serious damage to the product.  
NOTE: If you don't properly charge the handset,  
battery performance is compromised.  
Never install telephone wiring during a lightning storm.  
IFYOUR PRODUCT UTILIZES BATTERIES,THE FOLLOWING  
ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:  
MAKING A CALL  
1. Press the CALLBACK/TALK button.  
TELEPHONE JACK REQUIREMENTS  
Never install telephone jacks in wet locations unless the  
jack is specifically designed for wet locations.  
5. Place the extra battery pack on the battery charge cradle  
on the remote charger and charge for 16 hours prior to  
first use.  
To use this phone, you need an RJ11C  
1. Use only the type and size battery(ies) specified in the user  
manual.  
Wall plate  
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179  
2. When you hear a dial tone, dial a telephone number.  
Or  
type modular telephone jack, which  
might look like the one pictured here,  
installed in your home. If you don’t  
have a modular jack, call your local  
phone company to find out how to  
get one installed.  
Never touch non-insulated telephone wires or terminals,  
unless the telephone line has been disconnected at the  
network interface.  
2. Do not dispose of the battery(ies) in fire. They may explode.  
Check with local codes for possible special disposal instructions.  
HELP LINE  
For assistance in the use of this product, please call the following  
Toll-Free Help Line: 1-800-448-0329, and tell the representative that  
you have a Sears Craftsman Shop Phone.  
Modular  
telephone  
line jack  
SET UP  
Dial the phone number first, then press the CALLBACK/  
TALK button.  
Use caution when installing or modifying telephone lines.  
3. Do not open or mutilate the battery(ies). Released electrolyte is  
corrosive and may cause damage to the eyes or skin. It may be  
toxic if swallowed.  
There are five programmable menus available:  
Language, Area Code, Ringer Tone, Tone/Pulse Dialing,  
and Default Setting.  
Temporarily disconnect any equipment connected to the  
phone such as faxes, other phones, or modems.  
3. When finished, press the CALLBACK/TALK button again  
to hang up.  
If the equipment is causing harm to the telephone network, the  
telephone company may request that you disconnect the equipment  
until the problem is resolved.  
INSTALLATION NOTE: Some cordless telephones  
operate at frequencies that may cause interference to  
nearby TVs, microwave ovens, and VCRs. To minimize  
or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a  
TV, microwave ovens, or VCR. If such interference  
continues, move the cordless telephone farther away  
from these appliances.  
4. Exercise care in handling battery(ies) in order not to short out the  
battery(ies) with conducting materials such as rings, bracelets, and  
keys. The battery(ies) or conductor may overheat and cause burns.  
NOTE: To program these settings, the handset must  
be OFF (not in TALK mode).  
HEARING AID COMPATIBILITY (HAC)  
IMPORTANT INSTALLATION GUIDELINES  
ANSWERING A CALL  
1. Pick up the handset and press the CALLBACK/TALK button.  
This telephone system meets FCC standards for Hearing Aid  
Compatibility.  
Install telephone near both a telephone (modular) jack  
and an electrical power outlet.  
Attach your sales receipt to this booklet for future reference or jot  
down the date this product was purchased or received as a gift. This  
information will be valuable in the unlikely even that the product  
develops problems during the warranty period.  
5. Do not attempt to recharge the battery(ies) provided with or  
identified for use with this product that are not intended to be  
charged. The battery(ies) may leak corrosive electrolyte or explode.  
LANGUAGE  
Set the display language to show messages in either  
English, Spanish, or French.  
NOTE: The CALLBACK/ TALK button is disabled  
when the handset is in the remote charger cradle.  
US Number is located on the cabinet bottom  
REN number is located on the cabinet bottom  
Avoid sources of noise, such as a window by a busy  
street, and electrical noise, such motors, microwave  
ovens, and fluorescent lighting.  
6. Do not attempt to rejuvenate the battery(ies) provided with or  
identified for use with this product by heating them. Sudden  
release of the battery(ies) electrolyte may occur causing burns  
or irritation to eyes or skin.  
2. To disconnect a call, place the handset back in the  
cradle on the remote charger or press the CALLBACK/  
TALK button again.  
Purchase Date:___________________________________________  
Name of Store:____________________________________________  
1. Press the program/flash button until 1ENG 2FRA 3ESP  
shows in the display.  
Avoid heat sources, such as heating air ducts, heating  
appliances, radiators, and direct sunlight.  
INTRODUCTION  
DIGITAL SECURITY SYSTEM  
Your cordless phone uses a digital security system to  
provide protection against false ringing, unauthorized  
access, and charges to your phone line.  
CAUTION: When using telephone equipment,  
there are basic safety instructions that should  
always be followed. Refer to the IMPORTANT  
SAFETY INSTRUCTIONS provided with this  
product and save them for future reference.  
2. Use the cid/vol (+/> or -/<) buttons or the handset touch-  
tone pad to choose 1ENG (English), 2FRA (French) or 3  
ESP (Spanish).  
Avoid areas of excessive moisture or extremely low  
temperature.  
IMPORTANT SAFETY INSTRUCTIONS  
Some of the following information may not apply to your particular  
product; however, when using telephone equipment, basic safety  
precautions should always be followed to reduce the risk of fire,  
electric shock and injury to persons, including the following:  
7. When replacing battery(ies), all batteries should be replaced at  
the same time. Mixing fresh and discharged batteries could  
increase internal cell pressure and rupture the discharged  
battery(ies). (Applies to products employing more than one  
separately replaceable primary battery.)  
REDIAL  
While the phone is on, press the redial button to immediately  
redial the last number you dialed (up to 32 digits). If you get a  
busy signal, and want to keep dialing the number, just press  
redial again (you don't have to turn the phone off and back on).  
Avoid dusty locations.  
When you place the handset in the base, the unit verifies  
its security code. After a power outage or battery  
replacement, you should place the handset in the base for  
about 20 seconds to reset the code.  
3. Press program/flash to store selection.  
Avoid other cordless telephones or personal computers.  
This telephone has been designed to be simple to use,  
however, you can reach its full potential more quickly by  
taking a few minutes to read this users Guide.This  
telephone is a multifunction product for use with the Call  
Waiting Caller ID services available from your local  
telephone company.  
8. When inserting battery(ies) into this product, the proper polarity  
or direction must be observed. Reverse insertion of battery(ies)  
can cause charging, and that may result in leakage or explosion.  
AREA CODE  
1. Press the program/flash button until AREA CODE ---  
shows in the display. --- is the default setting.  
CHARGING THE BATTERY PACKS  
For your convenience, this shop phone includes two  
rechargeable battery packs. One battery pack is attached to  
the bottom of the cordless handset, and the other is  
attached to the top of the recharge cradle. While one is in  
use, the other is charging.  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the product.  
FLASH  
9. Remove battery(ies) from this product if storing over 30 days  
because the battery(ies) could leak and damage the product.  
3. Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Use the program/flash button to activate custom calling  
services such as call waiting or call transfer, which  
are available through your local phone company.  
2. Use the handset number pad to enter your three digit  
area code.  
10. Discard "dead" battery(ies) as soon as possible since "dead"  
batteries are more likely to leak in a product.  
4. Telephones should not be used while you are in a bathtub,  
shower or pool. Immersion of the telephone or handset in water  
could cause an electrical shock.  
NOTE: If you make a mistake, press the delete/  
channel button to erase the wrong area code and  
repeat step 2.  
TIP: Dont use the CALLBACK/ TALK button to  
activate custom calling services such as call waiting, or  
youll hang up the phone.  
3. Press program/flash to store selection.  
 

Cooper Lighting Landscape Lighting ARC15SWW33112 User Manual
Country Flame Indoor Fireplace INGLS 24 N User Manual
Craftsman Pressure Washer 58075201 User Manual
Crown Microphone PZM 11 User Manual
Dacor Convection Oven ERWD27 User Manual
Dynex Camcorder Accessories DX MW010 User Manual
Fisher Price MP3 Player M2813 User Manual
GE Air Conditioner AZ85E09EAC User Manual
GE Dishwasher GDWT100 User Manual
Gefen Switch GEF 3GSDI 16416 User Manual