Cable Electronics Switch HS103 User Manual

Operating Instructions
ٻ
 
HS103  
HDMI Switch  
Model No.
HS103  
Operating Instructions˄˅  
FEATURES  
z Compact size.  
z Auto switching.  
z No power supply.  
required.  
z Distribute any of the three input signal to the output port.  
.
z Manual selection button
z Signaling rates up to 2.25Gbits in support of 1080P display.  
Signal  
z receiver equalization to compensate up to 20m HDMI cable  
losses.  
z 3dB driver pre-emphasis to compensate for PCB losses.  
z Each port supports HDMI or DVI inputs.  
z HDCP compliant.  
1
 
1 Operating Instructions
ٻ
 
HS103  
TABLE OF CONTENTS  
Introduction···························································································· 4  
Panel Descriptions················································································· 4  
Connect and Operation ········································································· 5  
Specification ·························································································· 5  
Typical Application················································································· 6  
Maintenance·························································································· 6  
Warranty································································································ 7  
Contact Information  
8
················································································ 7  
3
 
Operating Instructions
ٻ
 
HS103  
INTRODUCTION  
Cable Electronics’ HS103 is a three-input-one-output HDMI switch. It allows  
switching of three HDMI inputs to the output. These three inputs are auto switching. (Smart  
function). You can also use the selection button on the front panel to choose the input you  
want to select.  
The HS103 has equalization and amplification to ensure HDMI signal’s transmission  
through long cable without quality loss.  
PANEL DESCRIPTIONS  
1. Input port 1  
2. Input port 2  
3. Input port 3  
4. Output port  
5. Indicator of input 1  
6. Indicator of input 2  
7. Indicator of input 3  
8. Indicator of output  
9. Source selection  
4
 
Operating Instructions
ٻ
 
HS103  
CONNECTION AND OPERATION  
1) Connect the HDMI sources (such as: HD-DVD, PS3, STB etc.) into the  
HS103 inputs.  
2) Connect the HDMI display (such as: HD-LCD, HD-LDP) to the HS103 output.  
3) Power on the the input source you want to show. Turn off unused sources as this will  
speed up the automatic switching.  
4) Power on the display  
˄Remark˖Manual selection button can be used when the user want to select the source  
manually.˅  
*Smart Function: When there are more than one source connected to the switch, the  
user should leave a desired source on, the others off. The the switch will choose this  
source automatically and send the signal to the display. If several sources are all  
powered on, the last powered source will be chosen. Beacuse of this function, the user  
could use the method of power off/on to select the desired signal.  
Insert / Extract cables gently.  
SPECIFICATIONS  
Operating Temperature Range  
Operating Humidity Range  
Input Video Signal  
-5 to +35°C(-41 to +95 °F)  
5 to 90 % RH (no condensation)  
0.5-1.0 volts p-p  
Input DDC Signal  
5 volts p-p (TTL)  
Video Format Supported  
DTV/HDTV:1080p/1080i/720p/576p/480p  
/576i/480i  
Signaling Rates  
Output Video  
2.25Gbits
x 3  
HDMI1.3  
Maximum Transmission Distance <20m (AWG28 HDMI cable)  
Dimensions  
62mmW×62mmH×19mmD  
/2.4’’W×2.4’’H×0.7''D  
40gs/0.08lb  
Mass( Main unit )  
*Note: Specifications are subject to change without notice. Mass and dimensions are  
approximate.  
5
 
Operating Instructions
ٻ
 
HS103  
TYPICAL APPLICATION  
IN  
IN  
OUT  
HS103  
IN  
MAINTENANCE  
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to  
clean this unit.  
6
 
Operating Instructions
ٻ
 
HS103  
WARRANTY  
Cable Electronics, Inc. warrants this product to be free from defects in material and  
workmanship, under normal use and service, for a period of one year from the purchase  
by the original purchaser. If this product is defective or malfunctions, Cable Electron-  
ics will replace or repair this unit (at their option) within a reasonable time. No ex-  
pressed or implied warranty is made for any defects caused by immersion or exposure  
to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects  
resulting from unauthorized disassembly and or modification.  
Thank you for your purchase.  
We appreciate your business. Please contact us with any questions or comments.  
CElabs/CableElectronics
3209 Wood Drive  
Garland, TX 75041  
Toll Free: 800.767.6189  
Fax: 469.429.9205  
7  
 

Beko Washer WM 622 W User Manual
Black Decker Coffee Grinder CBM200S User Manual
Black Decker Vacuum Cleaner 724196 User Manual
Blodgett Hot Beverage Maker KTG E User Manual
Bosch Appliances Washer WFK 2401 User Manual
Boston Acoustics Speaker ASW 250 User Manual
Bravetti Frozen Dessert Maker 10 WATTS User Manual
Casio Calculator FX 9750G User Manual
Casio Camcorder QV R4 User Manual
Casio Watch MA1310 EA User Manual