™
SmartLight
Model: VD12
The Lamp for Learning
READ ALL INSTRUCTIONS BEFORE USING
Important Safeguards
DANGER:
• Do not operate this device near a water source to avoid electrocution.
WARNING:
• Do NOT dismantle.
• Do not use with power supply voltage other than 120 VAC.
• Do not operate lamp in close proximity to flammable or combustible vapors,
such as aerosol spray products, or where oxygen is being administered.
• Do not block vents on ballast. Vents are necessary for proper function of the
ballast; blocking them may cause overheating of the ballast and increase
risk of fire.
• Do not cut or shorten the power cord.
• The bulb in this product contains a trace amount of mercury, a chemical
known to the state of California to cause birth defects or other reproductive
harm. This substance may also cause injury if inhaled or ingested.
CAUTION:
• For indoor use only.
• Always unplug lamp before performing bulb replacement or installation.
• This lamp is not for use with light dimmers, timers, motion detectors,
voltage transformers or extension cords.
• This product may cause interference with radios, cordless telephones
or devices that use a wireless remote control, such as televisions. If
interference occurs, move the product away from the device, plug the
product or device into a different outlet or move the lamp out of the line of
sight of the remote control receiver.
• Unplug lamp during lightning storms or when unused for long periods.
• Be very careful not to pinch any part of the cord between any metal pieces.
• Do not use solvents or cleaners containing abrasives, or ammonia based
cleaners on this product.
• All moisture should be properly wiped away and dried prior to restoring
power.
• Do NOT use lubricating agent in assembly; please see troubleshooting
section if you are having difficulty assembling your lamp.
• Disconnect lamp before performing alignment activity.
• Dispose of bulbs per local regulations. For more information on clean-up
SAVE THESE INSTRUCTIONS
3
Getting Started
Main Parts & Controls
D. Bulb
E. On/Off Switch
A. Lamp Head
B. Gooseneck
C. Lamp Base
A
B
E
D
C
Close-up of Lamp Head
4
Set-up Instructions
To prevent damage during shipping, the Verilux® bulb is surrounded
by protective padding. Carefully remove and dispose of the protective
padding. Check to ensure that the bulb is fully seated and has not
come loose from the socket during shipping. There should be no gap
between the bulb and socket.
How Light Enchanced Learning Works
When it comes to maximizing study time, the SmartLight™ is an ideal
study partner. This lamp is designed with Verilux’s patented Natural
Spectrum® Daylight, a type of full spectrum lighting that replicates
key wavelengths of natural daylight, to help students read faster with
greater comprehension, study longer without eyestrain, and improve
productivity, focus and concentration. Research using full spectrum
lighting in a school setting resulted in significantly greater student
achievement when compared to other light sources. And naturally lit
study environments have also proven to positively impact students’
abilities to understand study materials, resulting in increased math
and reading test scores. The SmartLight combines over 50 years of
research to scientifically tune light to the needs of the human eye. At
home, college or office, the SmartLight is the perfect study partner.
Scientifically Tuned to the Human Eye™
The back of the human eye has light receptors, called cones and rods,
located in the retina. Cones respond to different color wavelengths and
rods handle depth perception and contrast.
Under typical interior lights the rods are not well stimulated, which can
cause visual fatigue. The SmartLight stimulates the rods to respond
more efficiently and provides optimal wavelengths for the cones
which helps you read faster with greater comprehension, study longer
without eye strain, and improve focus while studying.
With the SmartLight, your eyes can see superior color representation
as if you were outside and therefore can function with more clarity and
less effort.
We hope you enjoy the benefits of our longstanding efforts to create
the finest lamps and lighting in the world.
5
Bulb Replacement Instructions
Removal
1. Unplug lamp from power source.
2. Firmly hold bulb base (B) and pull
bulb (C) from the socket (A) in
an outward motion.
Installation
A
A
B
B
C
C
1. Unplug lamp from power source.
2. Firmly hold base (B) and push bulb
(C) into the socket (A).
3. Be sure bulb is firmly seated in the
socket (see Fig. 1) and snapped
into the metal bulb clip (D).
YES
NO
Fig. 1
D
Notice
large gap
No
gap
Correctly seated bulb
Incorrectly seated bulb
CACUATUIOTNIO: N: ALWAYS UNPLUG LAMP BEFORE PERFORMING
BULB REPLACEMENT OR INSTALLATION.
6
Troubleshooting
Before requesting service on your Verilux® lamp, please read
the following:
• Make sure all power connectors, cords and plugs are inserted fully
and securely.
• Be sure the bulb is securely seated into the socket (see page 6).
• Make sure there is power to the wall outlet or try another outlet.
PROBLEM
CHECK
SOLUTION
Has the plug come
loose?
Insert plug securely into wall outlet.
Is the bulb old?
Light Won’t
Come On
Check bulb for blackening/darkening at bottom of spiral where it joins the
base (an indicator of bulb life) and replace bulb.
Be sure the bulb is securely seated into socket, repeat the bulb
installation process.
Is the bulb connected
securely into socket?
Sometimes when a new bulb is turned on for the first time the tube will
darken, but this will fade after a few minutes.
With older bulbs, darkening of the tube indicates end of bulb life (this
doesn’t affect operation except to reduce the amount of light available
since the phosphor in that area has become inactive). Bulb replacement
is recommended.
Is the bulb new?
Blackening/Darkening
at Ends of Bulb
Is the bulb old?
Insert plug securely into wall outlet.
Has the plug come
loose?
Be sure the bulb is securely seated into the socket, repeat the bulb
Is the bulb connected
securely to the socket?
Light Flickers
CAUTION:
installation process.
ALWAYS UNPLUG LAMP BEFORE
PERFORMING BULB REPLACEMENT OR INSTALLATION.
Is the lamp connected
to a dimmer switch?
Connect lamp plug only to wall outlet without dimmer switch.
WARNING:
WARNING:
Do not block vents on ballast. Vents are necessary for
proper function of the ballast; blocking them may cause overheating of
the ballast and increase risk of fire.
7
CareandCleaning
Your lamp is made from high quality materials that will last for many
years with minimum care. You may want to periodically clean the lamp
using a mild non-abrasive cleaner and soft cloth. When cleaning, make
sure you have turned off and unplugged the unit and allowed sufficient
time for the unit to cool. All liquid should be properly wiped away and
dried prior to restoring power.
CAUTION:
CAUTION:
DO NOT USE SOLVENTS OR CLEANERS
CONTAINING ABRASIVES, OR AMMONIA BASED CLEANERS.
CAUTION:
WARNING:
All moisture should be properly wiped away and dried
prior to restoring power.
8
Component Order Form
Mail or Fax your order by using this form to:
Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673
Fax: 802-496-3105
Quantity
Price
$19.95
$6.95
Order Code Product
CFML27VLX 27 Watt Natural Spectrum® Bulb
Shipping & Handling
Subtotal
CT & VT Residents ONLY add 6% Sales Tax
Total Payment Enclosed
Payment Method:
❏VISA ❏MASTERCARD ❏DISCOVER ❏AMERICAN EXPRESS ❏CHECK
Name as it Appears on Card
_____________________________________________________________________
Credit Card Number _________________________________________________
Expiration Date______________________________________________________
Security Code (from back of card)______________________________________
Authorized Signature (credit card purchasers ONLY)
_____________________________________________________________________
Ship to Address _____________________________________________________
_____________________________________________________________________
_____________________________________________________________________
Phone Number ______________________________________________________
Email Address_______________________________________________________
9
10
Warranty Registration
Thank you for purchasing one of the finest vision, therapy or sanitizing
products on the market. This Warranty Registration MUST be
completed and mailed in a timely manner in order for your warranty to
Name ________________________________________________________
Address______________________________________________________
______________________________________________________________
______________________________________________________________
Phone Number _______________________________________________
Email Address: _______________________________________________
Model # ______________________________________________________
Date of Purchase (Month/Day/Year)____________________________
Please cut out form and send to:
VERILUX INC
PO BOX 451006
OMAHA NE 68145-5006
11
One Year Limited Warranty
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!
Customer Service Department at 800-786-6850 during normal business hours.
This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673
Verilux warrants this product to be free from defects in material and workmanship for a
period of 90 days from the date of the original retail purchase from Verilux or an authorized
Verilux distributor. Proof of purchase is required for all warranty claims. During the
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of
this product, at no charge to the customer, subject to the following limitations: This limited
warranty does not include any postage, freight, handling, insurance or delivery fees. This
warranty does not cover damage, defect or failure caused by or resulting from accident,
external destruction, alteration, modification, abuse, misuse or misapplication of this
product.
This warranty does not cover damage to the product resulting from return shipping or
handling. The use of shipping insurance is recommended to help protect your product.
Return Authorization is required for all returns. To obtain a Return Authorization, please
contact the Verilux Customer Service Department at 800-786-6850.
If, during the first 90 days of ownership, this product fails to operate properly, it should be
customer service representative at 800-786-6850.
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.
1-800-786-6850
Representatives are available Monday — Friday, 9am — 5pm EST
340 Mad River Park, Waitsfield, VT 05673
Made in China
Printed in China for Verilux, Inc.
© Copyright 2011 Verilux, Inc. All rights reserved.
VD12-MAN-Rev4
|