User Manual
Model:NST-D100UFS
SATA to eSATA / USB2.0 / FIREWIRE
All Registered Trademarks Belong To Their Respected Companies.
Copyright © 2008 Vantec Thermal Technologies. All Rights Reserved.
1.Introduction
The Vantec NexStar Hard Drive Dock is a complete and easy way to add or swap hard drives to your
computer. It gives you the flexibility of connecting any SATA I/II hard drive to your computer via USB 2.0
/ Firewire / eSATA connection without opening up your computer case or installing into an enclosure.
Simply just insert any 2.5” or 3.5” SATA I/II hard drive into the NexStar Hard Drive Dock and you are ready
to transfer, copy, or backup files. Quick and easy, the Vantec NexStar Hard Drive Dock is the perfect
solution to access your hard drive in seconds.
2.System Requlrements
႑
႑
႑
႑
႑
႑
႑
Intel Pentium II 350 MHz-compatible or Mac G3 processor & greater.
Microsoft Windows 98SE/ME/2000/XP/VISTA or MAC OS 8.6 & greater or Linux Kernel 2.4.18 above.
USB, SATA or Firewire-equipped system.
For USB2.0 speeds, the system must support USB 2.0 specifications.
For eSATA speeds , the system must support eSATA specifications.
For Firewire speeds , the system must support Firewire specifications.
CD Rom drive (if drivers are needed)
2
3.Specifications/Features
Features
Κ
Package IncludesΚ
NexStar Hard Drive Dock
USB Cable
႑
႑
Install And Access Hard Drive in Seconds
Simple to Use Design; No Need to Add Enclosure or
Open Case
eSATA Cable
႑
႑
႑
႑
႑
႑
႑
႑
Firewire Cable
SATA to eSATA Bracket
Power Adapter
Power Cable
User Manual
CD Drive
Eject Button for Easy Removal of Hard Drive
Supports 2.5"/3.5" SATA I/II Hard Drive Up to 1.0 TB
Add Storage to Any System with USB, SATA or Firewire
Plug & Play
Attractive Blue LED Power & HDD Activity Light
Transfer Rates Up to 480Mbps w/USB 2.0
Transfer Rates Up to 3Gb/s w/SATA
Transfer Rates Up to 400Mbps Firewire
Specifications
Κ
႑
႑
႑
႑
႑
႑
႑
႑
Device Support ᧶SATA I/II Hard Drive
Device Size
᧶2.5ರ or 3.5ರ
Internal Interface ᧶SATA
External Interface ᧶USB 2.0, eSATA & Firewire
Material
᧶Plastic
Dimension
HDD Capacity
Power Supply
᧶136 x 83 x 87mm
᧶Up to 1TB
᧶Dual 5V/12V 2A
3
4.Installation
1. Connect the power adapter to the NexStar Hard Drive Dock.
2. Connect the USB, eSATA, or Firewire Cable to the NexStar Hard Drive Dock
and attach the other end to your computer.
Power
Cable
eSATA
Cable
OR
Firewire
Cable
OR
USB 2.0
Cable
4
3. Insert 2.5” or 3.5” SATA HDD into the slot.
5
3-1. When the eject button is upright, the NexStar Hard Drive Dock is ready for use.
6
5.Removal
Warning, please push power button & turn off unit before removing the hard drive!
1. Remove the HDD safely from your computer system.
2. Push down the button to eject the HDD.
(Stablize the HDD with your hand).
Download from Www.Somanuals.c7om. All Manuals Search And Download.
3. Remove the HDD from the Hard Drive Dock.
Download from Www.Somanuals.c8om. All Manuals Search And Download.
6.Driver Installation
Windows ME/2000/XP/VISTA
No drivers are necessary when using Windows ME/2000/XP/VISTA. If the hard drive does
not appear under My Computer, be sure to partition your hard drive.
Windows 98SE
1. The first time you plug in the NexStar Hard Drive Dock into a USB port of your
computer, the [Add New Hardware Wizard] dialog box will appear.
2. Click on [Next]. Check the [Search for the best driver for your device] and click on [Next]
again.
3. Insert the device driver CD into your CD-ROM drive if you have not already done so
and click on [Next], a screen should appear to show which Storage Device you installed.
Click on [Next].
4. After the needed files are copied into your system, click on [Finish].
5. You should now be able to see the new hard drive under My Computer. A green
Unplug or Eject hardware icon will appear in the system tray as well. If the drive does
not appear, you may need to partition your hard drive first.
Download from Www.Somanuals.c9om. All Manuals Search And Download.
Mac OS 9.0 or later
No drivers are necessary when using Mac OS 9.0 above. If the hard drive does not
appear on the desktop, be sure to partition your hard drive.
Mac OS 8.6
1. Unplug the NexStar Hard Drive Dock if you currently have it connected.
2. USB Mass Storage Support 1.3.5 must be installed on your system. If it is not, you can
download the USB Mass Storage Support 1.3.5 from the Apple Software Updates
3. Follow the direction associated with the USB Mass Storage Support driver to install.
4. Repeat the steps listed under “Connecting the NexStar Hard Drive Dock to your
computer”.
Download from Www.Somanuals.c1om0. All Manuals Search And Download.
7. Warranty
The NexStar Hard Drive Dock comes with a 1 year limited warranty (90 day parts). If your unit become
receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this
warranty. Please check the contents of the unit to make sure you received all parts.Also,check for any
cosmetic flaws. If any parts are missing or if there are cosmetic defects, Please contact the retailer
from which you purchased the unit immediately and ask for a replacement.
V
an
t
ec
T
hermal echnologies
T
43951 Boscell Rd
tel: 510-668-0368 fax: 510-668-0367
ebsite: www.vantecusa.com
.
Fremont CA 94538
,
w
Download from Www.Somanuals.c1om1. All Manuals Search And Download.
|