Universal Remote Control Universal Remote UR2 CBL CV04 User Manual

OCE-0030A_UR2CBLCV04_Rev23 2012.2.7 6:19 PM 페이지1  
STEP3 Point the remote control toward the TV and  
enter the three-digit code number assigned  
to your brand from the code tables.  
Introduction  
Button Functions  
3
1
Operating Instructions  
For CABLEVISION  
Remote Control  
The remote control is designed to operate the  
Scientific-Atlanta Explorer 8000, Pioneer  
Voyager DVR and the Pace Micro DVR Series  
set top boxes and the majority of TV's on the  
market.  
*Tip : The TV will turn off when the correct three-  
digit code number has been entered. You  
can verify you have selected the correct  
code by pressing the [MUTE] button, the TV  
should turn on or turn off.  
UR2-CBL-CV04  
Replacing Batteries  
Before you program or operate the remote control,  
you must install two AA alkaline batteries.  
*Note : If there is more than one three-digit number  
listed for your brand, try one code number at a  
time until your TV turns off.  
2
STEP4 Store the three-digit code number by press-  
ing the [TV] button once again. The iO button  
will blink twice to confirm that the code has  
been stored.  
STEP1 Remove the battery compartment cover  
on the back of your remote control.  
STEP2 Check battery polarity carefully, and  
install the batteries as shown in the illus-  
tration below.  
*Note : Try all the functions on the remote control. If  
any of the functions do not work as they  
should, repeat from Step 2 using the next three-  
digit code number from the same brand list.  
STEP3 Replace the battery compartment cover.  
B. Auto Search Method.  
If the three-digit code numbers assigned to your  
brand do not turn off your TV or the code tables  
do not list your brand, you can use the Auto  
Search Method to find the correct three-digit  
code number for your TV by the following steps:  
STEP1 Turn on the TV you wish to operate.  
STEP2 Press the [TV] button and the [SEL] button  
simultaneously for 3 seconds.  
The iO button will turn on.  
*Tip : The iO button will light on for 20 seconds.  
The next step must be entered while the iO  
button is on.  
STEP3 Press the [CH] or [CH] button one step  
at a time or keep it pressed. The remote will  
emit a series of Power ON/OFF commands.  
Release the [CH] or [CH] button as soon  
as the TV turns off.  
Operations  
4
Programming the Remote Control.  
5
*Tip : You can verify that you selected the correct  
code by pressing the [MUTE] button. The TV  
should either turn on or turn off.  
Default State :  
Device Default: Scientific-Atlanta Explorer  
8000  
A. Three-Digit Code Programming Method.  
The remote control can be programmed by pressing in a three digit code number that corre-  
sponds to particular manufacturers and brands of TV.  
The three-digit code numbers are listed in the code table of the instruction manual.  
STEP4 Press the [TV] button to store the code. The  
iO button will blink twice to confirm that the  
code has been stored.  
Volume Default : TV volume and mute through  
the TV, with the option of controlling volume  
and mute through the Cable. Refer to Section D  
for programming the volume and mute through  
your Cable.  
STEP1 Turn on the TV you wish to program.  
C. To Find the Three Digit Code Number  
That was Stored in the TV.  
STEP1 Press the [TV] button and the [SEL] button  
STEP2 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The iO button  
will turn on indicating the unit is ready to be programmed.  
Universal Remote Control, Inc.  
*Tip : The iO button will light on for 20 seconds. The next step must be entered while the iO button is on.  
simultaneously for 3 seconds.  
OCE-0030A Rev 23(01/20/12)  
 

TechniSat Network Router 5 1x8 G User Manual
Toshiba DVD Player SD 2700 User Manual
TRENDnet Router TEW 647GA User Manual
Tripp Lite Network Cables F007 003 User Manual
Uniden Two Way Radio UH047sx User Manual
ViewSonic Car Video System Va2238w LED VA2238wm LED User Manual
Vinotemp Refrigerator WM1500HZD User Manual
Vivotek Automobile Electronics vc8201 User Manual
Vivotek Home Theater Server VS3102 User Manual
Wagner SprayTech Paint Sprayer 1150 User Manual