Uniden Marine Radio UH076DLX User Manual

UH076DLX  
Handheld UHF-CB Transceiver  
For more exciting new products please visit our website:  
 
Contents  
Introduction  
Features  
4
5
5
6
Included in your Package  
Optional Accessories  
Controls and Indicators  
Getting Started  
Connect Drop-in Charger with the AC Adaptor  
Attaching the Antenna  
Attaching the Battery Pack  
Attaching the Beltclip  
Charging the Battery Pack  
Battery Level Display  
SPKR/MIC Jack Cap  
Connecting the SPKR/MIC  
Mount the Hang Up Bracket  
Operation  
7
7
8
8
9
10  
11  
11  
11  
Power On/Off  
Volume  
Adjusting the Key Beeps  
Roger Beep  
Selecting Channel  
12  
12  
12  
13  
13  
14  
15  
16  
17  
17  
17  
18  
19  
19  
19  
19  
20  
20  
20  
21  
21  
22  
22  
22  
23  
24  
25  
27  
Squelch  
To Transmit and Receive  
Using a Repeater Channel  
To Operate UH076DLX in Duplex Mode  
Scanning  
Open Scan (OS) Mode  
Group Scan (GS) Mode  
Programming Scan Channels  
Priority Channel  
Choosing a Priority Channel  
Drop-Out Delay  
Advanced Features  
CTCSS  
VOX  
Power Save  
Back Lighting  
Keypad Lock  
Busy Channel Lock-out (BCL)  
Monitor  
CTCSS Codes and Frequencies  
UHF-CB Channel Guidelines  
UHF-CB Channels and Frequencies  
Warranty  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
3
 
Introduction  
The UH076DLX is a JIS7 Waterproof, portable two-way UHF-CB radio. It is  
compact, rugged and fits easily in your hand. This hand held UHF-CB radio  
will give you consistent, outstanding performance in virtually all conditions and  
situations. To ensure that you get the most from the UH076DLX features,  
please read this operating guide carefully before using the unit.  
FEATURES  
• Narrow Band (NB) Radio  
• Communicate with up to 80 Channels in the UHF-CB Band1  
• 5W Max TX Power  
• 1W/5W Switchable TX Power  
• Built-in AVS Circuitry2  
• Waterproof (meets JIS7 waterproof specifications)3  
• Rubber Grips/Seal  
• 38 Built-in CTCSS codes  
• Backlit Keypad & LCD Display  
• Duplex Mode1  
• Open and Group Scan  
• Busy Channel Lockout Function  
• VOX Function  
• Headset Jack  
• Keypad Lock  
• Battery Type: Lithium-lon Rechargeable  
• Low Battery Alert  
• Battery strength Indicator  
• Auto Battery Save  
• Battery Cover with charge contacts  
• Roger Beep  
¹ Refer to p.23 - p.26 for channel information  
² AVS - Automatic Volume Stabilizer detects and manages incoming  
audio to comparable levels.  
3
The UH076DLX radio meets waterproof (JIS7) specifications only  
when the battery, the antenna and speaker MIC jack cap are correctly  
installed. The UH076DLX will retain its JIS7 rating when the  
accessory Speaker MIC is connected correctly but the Speaker MIC  
itself is not splash or waterproof.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
4
 
Included in your Package  
Antenna  
AC Adaptor  
(AAD-008S(M))  
UH076DLX  
External Speaker  
Mic (SM-078)  
Drop-in Charger  
Lithium Battery X2  
(DT078A)  
(BP079)  
Earphone Mic  
(EM-078)  
Belt Clip and  
Wrist Strap  
Cigarette Lead Charger  
with Hang Up Bracket  
(CK 078)  
Owner’s Manual  
If any of these items are missing from the box, contact your  
place of purchase, immediately.  
NOTE  
Optional Accessories  
• VOX Headset  
• Heavy Duty Speaker Mic  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
5
 
Controls and Indicators  
1/5w  
1
2
3
4
5
6
7
Antenna  
Beltclip  
Battery  
Battery Release Clip  
PTT (Push to Talk) Key  
Memory Key (mem)  
Scan Button (scan)/  
Busy Channel Lock-Out  
Mode (bcl)  
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Transmit  
1W Power  
Duplex Transmit  
Scanning  
Monitor  
8
9
TX Power/Lock Button  
Microphone  
10 Speaker MIC Jack  
11 ON/OFF VOL Knob  
12 Squelch Knob (SQ)  
13 LCD Display  
14 Monitor Button (mon)  
15 Open Scan/Group Scan  
(os/gs)/VOX  
16 Channel Up Button (  
17 Duplex Key (dup)/  
CTCSS Key (ctcss)  
18 Channel Down Button (  
19 Speaker  
Priority  
Busy Channel Lock Out  
Group Scanning  
Channel Numbers  
CTCSS  
VOX  
)
Roger Beep  
Battery Level Indicator  
Key Lock  
Memory  
Receive  
)
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
6
 
Getting Started  
Connect Drop-in Charger with AC Adaptor  
Plug one end of the AC adaptor into the wall  
outlet and the other end into the drop-in charger.  
OR...  
Connect Cigarette Lead Charger  
to Cigarette Lighter Jack  
The drop-in charger and cigarette lead charger are not  
water proof. Ensure the radio is dry before connecting to the  
charger. Don’t use the chargers when the ambient  
temperature is below 0º C (32º F) or above 45º C (113º F)  
Input Voltage (Cigarette Lead Charger): +12VDC  
to+24VDC.  
NOTE  
Attaching the Antenna  
Attach the antenna to the UH076DLX.  
Be sure the antenna is firmly seated.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
7
 
Getting Started  
Contacts  
Attaching the Battery Pack  
1. Place the battery pack onto the back of the  
radio. It will only fit in one way.  
2. Snap the battery release clip until it clicks.  
Be sure the battery pack fits tightly against  
the UH076DLX body.  
Avoid exposing the Lithium Ion battery, attached or  
unattached to the radio, in direct sunshine, heated cars, or  
in areas with temperatures below –20°C (–4°F) or above  
+60°C (+140°F).  
Exposing the chemicals contained within the battery pack to  
temperatures above +60 °C (+140°F) may cause the battery  
to rupture, fail or reduce performance.  
CAUTION  
In case of exposure to cell contents, wash the affected area  
thoroughly, and seek medical attention.  
Additional battery cautions should be applied as described  
on p.2.  
Attaching the Beltclip  
1. Hold the beltclip in the direction.  
2. Apply it to the hanger piece on the back of  
the radio. Then slide it up.  
3. You will hear a click. The beltclip is firmly  
attached.  
4. To take the beltclip off the radio, turn it  
and slid it up.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
8
 
Getting Started  
Charging the Battery Pack  
Your radio is powered by a specially designed Lithium Ion battery pack.  
Before operating the UH076DLX, charge the Lithium Ion battery pack  
for 5 hours without interruption in the drop-in charger or 3.5 hours  
without interruption in the cigarette lead charger.  
For the initial battery charge, make sure the radio is off for  
optimum charging.  
NOTE  
The drop-in charger can charge the Lithium Ion  
battery pack attached to the UH076DLX, in the front  
charging slot and also charge a second Lithium Ion  
battery pack separately in the rear charging slot.  
When you charge the 2nd battery, be sure to push it  
all the way into the charge slot.  
1. Place the UH076DLX, in the drop-in charger.  
2. The red LED illuminates and stays ON, until fully  
charged.  
• The charger won’t overcharge the battery packs.  
When charging is completed, the charge LED is no  
longer illuminated.  
• Do not transmit when the UH076DLX, is in the  
drop-in charger!  
You can monitor incoming calls while the UH-  
076DLX, is in the drop-in charger.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
9
 
Getting Started  
Battery Level Display  
The BATTERY icon in the top right hand corner of the screen indicates  
the UH076DLX current battery voltage level at all times. The battery  
level is displayed in 4 levels.  
LEVEL 3  
LEVEL 4  
Battery approx.  
Battery 100% full  
40% capacity  
LEVEL 2  
Low Battery  
LEVEL 1 (flashing)  
Empty Battery  
PTT  
When  
is pressed at Level Empty, battery icon and  
channel number will flash, transmission is disabled.  
NOTE  
NOTE  
Recharge the battery at any time. From empty the battery  
will take up to 5 hours to fully charge.  
When charging with the cigarette lead charger the  
UH076DLX charges slowly and increases to the Battery  
Level indication are inhibited. Switch the radio OFF then ON  
for an accurate display.  
NOTE  
Battery Life : 14 Hours (Typical)  
This is based on the following Duty Cycle:  
Transmit (Low Power)  
Receive  
5%  
5%  
Stand-by  
90%  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
10  
 
Getting Started  
SPKR/MIC Jack Cap  
Make sure the SPKR/MIC jack cap is firmly pushed in to maintain  
submersible rating.  
Connecting the SPKR/MIC  
Release the SPKR/MIC jack cap to plug in the SPKR/MIC. Secure the  
SPKR/MIC plug by tightening the plug collar clockwise.  
Mount the Hang-Up Bracket  
Use the radio Hang-up Bracket when charging the UH076DLX with the  
Cigarette Lead Charger in a vehicle. The radio Hang-up Bracket comes  
in two parts. How and where you choose to mount the Hang-up Bracket  
will determine which parts to use.  
Conventional Mounting with Screws  
Use the front part of the Hang-up Bracket only.  
Locate a suitable mounting position in the vehicle  
and mark and drill two 3mm holes. Fix the Hang-  
up Bracket into place with screws.  
Conventional Mounting with Double Sided Tape  
(not supplied)  
High quality Double-Sided tape can be found at good retail stores.  
Secure the front and back pieces of the Hang-up Bracket using the  
supplied binding screws.  
Locate a suitable mounting position.  
Apply high quality Double-Sided tape  
onto the flat area of the Hang-up  
Bracket back piece and then press  
firmly to the mounting position.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
11  
 
Operation  
• See the Controls and Indicators page at the back of this operating  
guide for button and key operations.  
Power On/Off  
To turn the unit ON, rotate the [ON/OFF VOL]  
clockwise. A channel number and battery level  
should appear on the display.  
UH076DLX  
To turn the unit OFF, rotate the [ON/OFF VOL]  
knob counter-clockwise. The display will disappear.  
Volume  
Rotate the [ON/OFF VOL] knob clockwise or counter-clockwise to adjust  
speaker volume to desired listening level.  
Adjusting the Key Beeps  
Your radio emits a beep each time-one of the keys (except for the PTT or  
mon) are pressed.  
dup  
To turn OFF this beep: Press and hold  
To turn ON this beep: Press and hold  
while turning on the radio.  
while turning on the radio.  
dup  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
12  
 
Operation  
Roger Beep  
Roger Beep is a BEEP that is sent to notify the end of transmission  
(both PTT and VOX transmission.) Roger Beep can be heard through  
the speaker when Key Beep is on. Roger Beep is transmitted even if  
key beep is turned off. However Roger Beep will not be heard from the  
speaker.  
To turn ON Roger Beep: Press and hold  
radio.  
while turning on the  
while turning on the  
To turn OFF Roger Beep: Press and hold  
radio.  
Selecting Channel  
Press  
or  
to select the desired channel.  
If you press and hold the  
scroll rapidly.  
or  
, channel number will  
NOTE  
For your reference a list of the available channels,  
corresponding frequencies and guidelines for their use and  
selection is printed on page 23. For Australia, Channels 05  
and 35 are reserved for Emergency Calls.  
NOTE  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
13  
 
Operation  
Squelch  
The squelch is used to eliminate any annoying background noise when  
there are no signals present.  
Make sure to first select a channel not in use before setting  
the squelch in your UH076DLX UHF-CB radio.  
NOTE  
Strong Signals  
Think of squelch as a gate. Turn [SQ] fully  
clockwise. This raises the “Squelch Gate” so high  
Medium Signals  
that only the very strong signals can get through.  
Weak Signals  
Noise  
Turn [SQ] fully counter clockwise until you hear a  
hiss. This opens the “Squelch Gate” so that  
everything gets through noise, weak signal, and  
UH076DLX  
UH076SX  
strong signals.  
To set the “Squelch Gate” to the desired level, turn  
[SQ] counter-clockwise until you hear noise. Then  
turn the [SQ] clockwise just until the noise  
stopped. Now only the desired signal can get  
through.  
If an incoming signal is very weak there is a possibility that  
you will have a choppy or broken reception, due to the  
sensitivity of the squelch. In this case, simply rotate the  
[SQ] clockwise until the weak signal is heard clearly.  
NOTE  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
14  
 
Operation  
To Transmit and Receive  
The UH076DLX uses the UHF-CB Channels. For your reference a list of  
the available channels and corresponding frequencies is printed on p.24  
- p.25.  
1. The maximum RF transmit power of UH076DLX is 5 Watts.  
1/5w  
To switch to low power, press  
. LOW  
appears on the LCD.  
1/5w  
To switch back to higher power, press  
again. LOW indicator disappears from the LCD.  
2. Before you transmit, listen for activity on the  
selected channel.  
3. When the channel is clear, press and hold the  
PTT  
to transmit. TX appears on the LCD.  
Hold the radio with microphone approximately  
five cms in front of your mouth with the  
antenna at approximately 45* angle away from  
your head. Speak in a clear, normal  
conversational voice.  
4. When you have finished speaking, release the  
PTT  
and listen for a response. TX indicator  
then disappears on the LCD.  
The display shows BUSY when a transmission  
is being received by your radio.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
15  
 
Operation  
Using a Repeater Channel  
UHF-CB Repeaters are used to retransmit or relay your signal.  
Repeaters will extend the range of your radio and overcome the  
shielding effect caused by solid obstructions.  
In normal Simplex operation, your radio transmits on one particular  
frequency and receives on that same frequency. If there is a barrier (i.e.  
a Tall Building) that partially blocks your transmitted signal, the possibility  
of the other radio receiving the signal is very slim. Valleys, metallic  
structures, etc., tend to act as a screen between radios.  
Standard Operation without the aid of a Repeater Station  
Operation with the aid of a Repeater  
With Duplex operation, the signal coming from your radio is received  
by the Repeater station and then re-transmitted at the same time on  
another channel.  
Your UH076DLX is designed with duplex capability on Channels 1 to 8  
and Channels 41 to 48. When any of these channels are set to operate  
in duplex mode during transmission, the UH076DLX automatically sends  
the signal at a frequency 30 channels above the original in order to access  
the repeater station. After transmitting, the radio reverts back to its original  
operating frequency.  
For example:  
1. CH01 is on Duplex Mode - will receive on CH01 but Transmit on CH31  
2. CH41 is on Duplex Mode - will receive on CH41 but Transmit on CH71,  
etc... Refer to UHF-CB Channel & Frequencies table on p.25 - p.26.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
16  
 
Operation  
To Operate UH076DLX in Duplex Mode  
Only channels 01 - 08 and 41 - 48 are available for Duplex.  
Eg. CH01 is being used in your area for repeater use.  
dup  
Press  
Press  
momentarily. The DUP icon appears.  
dup  
again to deactivate the duplex operation.  
UH076DLX will return to simplex operation.  
Check with your local retailer for available repeaters.  
NOTE  
Scanning  
The UH076DLX has two types of scanning; Open Scanning (OS)  
and Group Scanning (GS). Scanning allows you to search for active  
channels programmed in the OS or GS memory.  
To initiate scanning;  
scan  
Press  
and scanning starts. SCAN icon flashes during scanning.  
Open Scan (OS) Mode  
The absence of GS icon indicates that the unit is in OS mode. Allows  
continuous scanning of channels stored in the Open Scan (OS) memory.  
If an active channel is found, scanning will stop on that channel.  
The factory has preprogrammed all the UHF-CB channels  
into the Open Scan channel memory. However, you can  
change or customize the channels by following the steps on  
programming Scan Channels on page 18.  
NOTE  
Example: CH80 becomes active  
If the received signal cease, the unit will wait for at least 3 seconds for  
the signal to return, otherwise scanning resumes.  
mem  
To skip the active channel, press  
To deactivate SCAN, press  
momentarily. Scanning resumes.  
scan  
PTT  
or  
.
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
17  
 
Operation  
If SCAN is deactivated while in an active channel, the  
UH076DLX will stay on that active channel. If no other  
channels are active, the UH076DLX will reinstate the  
starting channel.  
NOTE  
Group Scan (GS) Mode  
Allows you to monitor a Priority Channel while scanning.  
os/gs  
To use GS Mode Scanning, press the  
the display.  
key. GS icon appears on  
GS Scanning checks the Priority channel activity regularly.  
If GS Scanning is initiated when there are no channels  
programmed in GS memory, an error tone will be heard and  
NOTE  
scanning will not start.  
If the Priority channel becomes active the radio will stay on that channel  
for as long as the signal is present. If the received signal ceases, Priority  
scanning continues after 3 seconds.  
If scanning stops on a channel which is not a Priority  
Channel the UH076DLX will continue monitoring the Priority  
NOTE  
Channel for activity while listening to the active one.  
scan  
PTT  
To deactivate SCAN, press  
or  
.
If SCAN is deactivated while it is turned to an active  
channel, the UH076DLX will stay on that active channel.  
If none of the channels are active, the UH076DLX will  
reinstate the Priority channel.  
NOTE  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
18  
 
Operation  
Programming Scan Channels  
1. Select which Scanning Mode you wish to use OS or GS Mode.  
OS is indicated by the absence of the GS icon.  
NOTE  
2. Select the channel you want to store by pressing  
or  
.
mem  
3. Press and hold  
for 1.5 secs. to store. MEM icon appears and  
two short tone beeps are heard.  
mem  
4. To remove the channels from Memory, press and hold  
for 1.5  
secs. once more. Two short tone beeps are heard and the MEM icon  
disappears.  
Priority Channel  
The Priority Channel feature allows the user to monitor one channel in  
the UH076DLX, monitoring it every 1.5 secs. during Group Scanning.  
Choosing a Priority Channel  
The starting channel, when Group Scanning is  
initiated, is always the Priority Channel. To change  
the priority channel setting while scanning,  
(eg. PRI Channel is CH17 (476.825 MHz ));  
a. press  
, to select a higher channel  
(scanning pauses).  
or  
b. press  
, to select a lower channel  
(scanning pauses).  
Drop-out Delay  
While scanning, the UH076DLX stops at a busy channel and receives a  
signal. When the received signal is over, the unit will wait for 3 seconds  
for the return of the signal, otherwise, the radio resumes scanning.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
19  
 
Operation  
Advanced Features  
CTCSS (Continuous Tone Coded Squelch System)  
CTCSS is a feature that allows a group to talk to each other without  
hearing other users on the same channel.  
Programming CTCSS Code  
1. Select a desired channel to be used with CTCSS.  
ctcss  
2. Press and hold  
for 1.5 secs. CTCSS icon blinks.  
3. Press  
4. Press  
or  
to select the desired CTCSS code.  
ctcss  
to save the selected code. CTCSS icon stops blinking.  
The UH076DLX will return to standby mode after 10 secs.  
of no activity. CTCSS code can be programmed on every  
channel. There are 38 available CTCSS tone per channel.  
NOTE  
CTCSS Scan Operation  
scan  
1. Press  
to start scanning (GS or OS) mode.  
ctcss  
2. Press and hold  
to change to CTCSS scan mode.  
3. When a signal is sensed on a CTCSS CH, the UH076DLX stops for  
about 400 msecs (decode time) to decode the CTCSS code. If there is  
no code or the receive code does not match the one programmed on  
the unit, the unit resumes scanning.  
Channels 5 and 35 are used for emergency channels.  
CTCSS will not operate on these channels.  
NOTE  
VOX  
Built-in Voice Activated Circuit (VOX) feature enables the user to  
transmit automatically by speaking on the microphone of the VOX  
headset (not supplied) without pressing the PTT switch.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
20  
 
Operation  
VOX feature will not work without the VOX Headset  
Microphone. The built in mic of UH076DLX is temporarily  
disabled when VOX feature is working, however accidental  
NOTE  
PTT  
pressing of  
will cause the unit to transmit briefly.  
To activate VOX  
1. Press and hold  
2. Press either  
vox  
for 1.5 secs. VOX icon blinks.  
or  
within 10 secs to select the desired  
VOX sensitivity level (9 with the lowest sensitivity to 1 with the  
highest sensitivity).  
vox  
3. Press  
to save the selected level. VOX icon stops blinking.  
4. Install VOX Headset (not supplied) to UH076DLX.  
To De-activate VOX  
1. Remove VOX Headset from UH076DLX.  
vox  
2. Press and hold  
for 1.5 secs. until VOX blinks.  
3. Press  
4. Press  
repeatedly and until oF is displayed.  
vox  
to save the setting. VOX icon disappears.  
Changing the VOX sensitivity setting to oF without removing  
the microphone will cause the unit to transmit continuously.  
NOTE  
Power Save  
Battery Save feature extends the battery life by switching the receiver  
circuit power ON and OFF. This feature automatically activates during  
standby mode (RX mode without signal).  
Back Lighting  
The Liquid Crystal Display (LCD) and function keys are backlit for easy  
viewing at night or in low light situations. The back lighting automatically  
switches ON every time a key (except PTT) is pressed. It turns OFF 5  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
21  
 
Operation  
secs after the last key is pressed.  
Keypad Lock  
To prevent accidental entries, you can lock the keypad.  
lock  
Press and hold the  
button until it beeps to activate Key Lock.  
icon appears.  
lock  
To unlock the keypad, press and hold the  
disappears.  
button again.  
icon  
When the Key Lock is active, a warning beep will be heard if  
you attempt to press keys. (except for the PTT button).  
NOTE  
Busy Channel Lock-out (BCL)  
This feature prevents accidental transmission on a busy channel.  
This is recommended on channels where CTCSS is being used. If you  
hear sound from the speaker (unless it’s in Monitor Mode -- see below),  
the BCL feature will prevent you from transmitting.  
To activate BCL  
Press and hold  
bcl  
for 1.5 secs. until BCL appears on display.  
To De-activate BCL  
bcl  
Press and hold  
for 1.5 secs. until BCL disappears from the display.  
Monitor  
This feature enables users to listen in for weak signals on the current  
channel at the press of a button.  
To use monitor  
• For brief listening, press  
mon  
.
mon  
• For continuous listening. Press and hold  
for 2 sec. A two tone  
beep will be heard and the receiver circuit will stay open letting in both  
the noise & weak signals.  
• Display shows MON and BUSY icons.  
To return to normal receive mode press  
mon  
.
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
22  
 
CTCSS Codes and Frequencies  
Code No.  
Frequency (Hz)  
OFF  
Code No.  
20  
Frequency (Hz)  
131.8  
136.5  
141.3  
146.2  
151.4  
156.7  
162.2  
167.9  
173.8  
179.9  
186.2  
192.8  
203.5  
210.7  
218.1  
225.7  
223.6  
241.8  
250.3  
“oF’  
1
67.0  
21  
2
71.9  
22  
3
74.4  
23  
4
77.0  
24  
5
79.7  
25  
6
82.5  
26  
7
85.4  
27  
8
88.5  
28  
9
91.5  
29  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
94.8  
30  
97.4  
31  
100.0  
103.5  
107.2  
110.9  
114.8  
118.8  
123.0  
127.3  
32  
33  
34  
35  
36  
37  
38  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
23  
 
UHF-CB Channel Guidelines  
Always listen on a channel (or observe the receive signal level  
meter) to ensure it is not already being used before transmitting.  
Channels 5 and 35 are used for emergency channels.  
CTCSS will not operate on these channels.  
Please follow these guidelines for channel use in Australia:  
• Channels 05 and 35 are Emergency Channels.  
• Channel 11 is a Calling Channel.  
• Channels 22 and 23 are for telemetry and telecommand  
applications, channels 61, 62 and 63 are for future use and TX is  
inhibited on these channels.  
NOTE  
General communication is accepted on all other channels  
with these guidelines:  
• Channel 40 - road channel (Australia).  
• Channels 01-08 (and 31-38), and Channels 41-48  
(and 71-78) are repeater channels.  
Important information - 80 Channel UHF-CB channel expansion  
To provide all users additional channel capacity within the UHF-CB  
Band. The ACMA will change the majority of the current wideband 40  
channel use to narrowband channel use. This allows for additional  
channels to be added, up to 80 Channels.  
This simply means that the new narrowband radio you have purchased  
will have more channels than older radios. Please refer to the guidelines  
above and the channel chart for further channel information.  
A list of currently authorised channels can also be obtained from the  
ACMA website in Australia and the MED website in New Zealand.  
Interference / Poor Audio  
When a new narrowband radio receives a signal from an older  
wideband radio the speech may sound loud - however the  
UH076DLX’s built-in AVS (Automatic Volume Stabilizer) circuitry will  
detect and manage incoming audio to comparable levels.  
NOTE  
Narrowband radios operating on CH41 - CH80 may encounter  
interference from a nearby wideband radios transmitting on high  
power on an adjacent channel (frequency).  
When an older wideband radio receives a signal from a new  
narrowband radio the speech may sound quiet - the wideband radio  
user simply adjusts their radio volume for best performance.  
The above situations are not a fault of the radio but a symptom of mixed  
wideband and narrowband radios in current use. It is expected that as  
older wideband radios are phased out this issue will be eliminated.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
24  
 
UHF-CB Channels and Frequencies  
Simplex Mode  
Transmit  
/ Receive  
Simplex Mode  
Transmit  
/ Receive  
Duplex Mode  
Transmit  
Frequency (MHz)  
CH  
No.  
CH  
No.  
Frequency (MHz)  
Frequency (MHz)  
1
2
476.425  
476.450  
476.475  
476.500  
476.525  
476.550  
476.575  
476.600  
476.625  
476.650  
476.675  
476.700  
476.725  
476.750  
476.775  
476.800  
476.825  
476.850  
476.875  
476.900  
477.175 (CH31)  
477.200 (CH32)  
477.225 (CH33)  
477.250 (CH34)  
477.275 (CH35)  
477.300 (CH36)  
477.325 (CH37)  
477.350 (CH38)  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
476.925  
476.950 (RX only)  
476.975 (RX only)  
477.000  
3
4
5
477.025  
6
477.050  
7
477.075  
8
477.100  
9
477.125  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
477.150  
477.175  
477.200  
477.225  
477.250  
477.275  
477.300  
477.325  
477.350  
477.375  
477.400  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
25  
 
UHF-CB Channels and Frequencies  
Simplex Mode  
Transmit  
/ Receive  
Simplex Mode  
Transmit  
/ Receive  
Duplex Mode  
Transmit  
Frequency (MHz)  
CH  
No.  
CH  
No.  
Frequency (MHz)  
Frequency (MHz)  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
476.4375  
476.4625  
476.4875  
476.5125  
476.5375  
476.5625  
476.5875  
476.6125  
476.6375  
476.6625  
476.6875  
476.7125  
476.7375  
476.7625  
476.7875  
476.8125  
476.8375  
476.8625  
476.8875  
476.9125  
477.1875 (CH 71)  
477.2125 (CH 72)  
477.2375 (CH 73)  
477.2625 (CH 74)  
477.2875 (CH 75)  
477.3125 (CH 76)  
477.3375 (CH 77)  
477.3625 (CH 78)  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
476.9375 (RX only)  
476.9625 (RX only)  
476.9875 (RX only)  
477.0125  
477.0375  
477.0625  
477.0875  
477.1125  
477.1375  
477.1625  
477.1875  
477.2125  
477.2375  
477.2625  
477.2875  
477.3125  
477.3375  
477.3625  
477.3875  
477.4125  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
26  
 
Warranty  
UNIDEN UH076DLX UHF CB Transceiver  
IMPORTANT: Satisfactory evidence of the original purchase is required  
for warranty service  
Please refer to our Uniden website for any details or warranty durations offered  
in addition to those contained below.  
Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001  
865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the  
case may be.  
Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser  
only that the UH076DLX (“the Product”), will be free from defects in materials  
and craftsmanship for the duration of the warranty period, subject to the  
limitations and exclusions set out below.  
Warranty period: This warranty to the original retail purchaser is only valid in  
the original country of purchase for a Product first purchased either in Australia  
or New Zealand.  
Product  
3 Years  
Battery Pack &  
Accessories  
1 Year  
If a warranty claim is made, this warranty will not apply if the Product is found  
by Uniden to be:  
(A) Damaged or not maintained in a reasonable manner or as recommended  
in the relevant Uniden Owner’s Manual;  
(B) Modified, altered or used as part of any conversion kits, subassemblies or  
any configurations not sold by Uniden Aust or Uniden NZ;  
(C) Improperly installed contrary to instructions contained in the relevant  
Owner’s Manual  
(D) Repaired by someone other than an authorized Uniden Repair Agent  
in relation to a defect or malfunction covered by this warranty; or  
(E) Used in conjunction with any equipment, parts or a system not  
manufactured by Uniden.  
Parts Covered: This warranty covers the Product and included accessories.  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
27  
 
Warranty  
User-generated Data: This warranty does not cover any claimed loss of  
or damage to user-generated data (including but without limitation phone  
numbers, addresses and images) that may be stored on your Product.  
Statement of Remedy: If the Product is found not to conform to this warranty  
as stated above, the Warrantor, at its discretion, will either repair the defect or  
replace the Product without any charge for parts or service. This warranty does  
not include any reimbursement or payment of any consequential damages  
claimed to arise from a Product’s failure to comply with the warranty.  
Our goods come with guarantees that cannot be excluded under the Australian  
Consumer Law. You are entitled to a replacement or refund for a major failure  
and for compensation for any other reasonably foreseeable loss or damage.  
You are also entitled to have the goods repaired or replaced if the goods fail to  
be of acceptable quality and the failure does not amount to a major failure.  
This warranty is in addition to and sits alongside your rights under either the  
COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER  
GUARANTEES ACT (New Zealand) as the case may be, none of which can be  
excluded.  
Procedure for obtaining warranty service: Depending on the country in  
which the Product was first purchased, if you believe that your Product does  
not conform with this warranty, you should deliver the Product, together with  
satisfactory evidence of your original purchase (such as a legible copy of the  
sales docket) to Uniden at the addresses shown below. You should contact  
Uniden regarding any compensation that may be payable for your expenses  
incurred in making a warranty claim. Prior to delivery, we recommend that you  
make a backup copy of any phone numbers, images or other data stored on  
your Product, in case it is lost or damaged during warranty service.  
UNIDEN AUSTRALIA PTY LTD  
Service Division  
UNIDEN NEW ZEALAND LTD  
Service Division  
345 Princes Highway,  
Rockdale, NSW 2216  
150 Harris Road, East Tamaki  
Auckland 2013  
Phone: 1300 366 895  
Phone: (09) 273 8377  
UNIDEN UH076DLX  
Handheld UHF-CB Transceiver  
28  
 
 
 
 
THANK YOU FOR BUYING A UNIDEN PRODUCT.  
© 2014 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in Vietnam.  
U01UT961AZZ(0)  
 

Technicolor Thomson Cordless Telephone 25952XX2 User Manual
Techno Source Handheld Game System IM 0300A User Manual
Thule Automobile Accessories 056 User Manual
Toshiba Network Card SD R2102 User Manual
Troy Bilt Tiller 12155 User Manual
Universal Remote Control Universal Remote OCE 0027A User Manual
Victorinox Watch Swiss Army Timepiece User Manual
Vulcan Hart Hot Beverage Maker VGL20 User Manual
Vulcan Hart Range 160L User Manual
Weed Eater Lawn Mower WE165T42A User Manual