Sony MiniDisc Player RM D11P User Manual

3-810-645-12(1)  
Names of Parts  
Features  
p (Stop)  
= (Previous track)  
+ (Next track)  
0 (Rewind)  
) (Fast forward)  
r (Recording)  
T. REC (Time Machine Recording)*  
* The T. REC button can be used only if your MD deck has the Time  
Machine Recording function.  
1 CD-SYNC operation  
2 MD basic function 3 Editing operation  
Can create titles for your recorded MDs and tracks by using uppercase  
and lowercase letters, numbers and symbols.  
buttons  
buttons  
buttons  
Can be used to control the basic operations of an MD deck.  
Can be used for synchro-recording with a CD player with some MD  
decks.  
Re m o t e Co m m a n d e r fo r  
Min iDisc  
Can switch among MD editing functions at the touch of a single button,  
and can be used to perform all editing operations.  
3 Editing operation buttons  
ERASE (Erases recorded tracks)  
DIVIDE (Divides recorded tracks)  
COMBINE (Combines recorded tracks)  
MOVE (Moves recorded tracks)  
UNDO (Cancels the last edit)*  
ENTER (YES button)  
Unsupported models:  
Operating Instructions  
Mode demploi (au dos)  
MDS-101, MDS-102, MDS-S1, MDS-S30, MDS-S35, MDS-501, MDS-302,  
MDS-303, MDS-JA3ES, MDS-MX1, CMT-M1, DHC-MD1, ZS-M1,  
PMC-M2, MZ-1, MZ-R2, MZ-R3  
CANCEL (NO button)  
* The UNDO button can be used only if your MD deck has the Undo  
function.  
Precautions  
4 Title input buttons  
4 Title input buttons  
5 Display function buttons  
NAME (Switches to title input mode)  
CAPS (Uppercase letters, numbers, symbols)*  
SML (Lowercase letters, numbers, symbols)*  
(Unlabeled button: space)  
On safety  
1 CD-SYNC operation buttons (CD synchro-recording)  
These buttons can be used only if the remote supplied with your MD deck  
also has these buttons.  
Do not drop or step on the remote. Do not spill liquids on the remote.  
Do not leave the remote in direct sunlight, near a heat source, or in a  
humid environment.  
STOP (CD synchro-recording stop)  
Character buttons (60 buttons)  
START (CD synchro-recording start)  
STANDBY (CD synchro-recording standby)  
P (CD player – Pause)  
= (CD player – Previous track)  
+ (CD player – Next track)  
* The CAPS and SML buttons have indicators that light when the button in  
question is selected.  
On cleaning  
Clean the cabinet, panel and controls with a soft cloth slightly moistened  
with a mild detergent solution. Do not use any type of abrasive pad,  
scouring powder or solvent such as alcohol or benzine.  
5 Display function buttons  
SCROLL (Use to review track titles during playback.)  
RM-D11P  
DISPLAY (While MD is paused: Use to check the total number of tracks, the  
total playback time, the MD time remaining, and disc title. While MD is  
playing: Use to check the time remaining on the track and the track title.)  
2 MD basic function buttons  
( (Play)  
Sony Corporation 1996 Printed in Japan  
P (Pause)  
Labeling Tracks and MDs  
Using the Editing Operation Buttons  
Specifications  
Inserting Batteries  
Operating distance (approx.)  
Power requirements  
Battery life  
7 m  
1
Press NAME.  
In order to switch editing functions, first press the desired editing  
operation button (ERASE, DIVIDE, COMBINE, MOVE, or UNDO), and  
then press the ENTER button.  
Insert two R6 (size-AA) batteries by matching the + and – on the batteries.  
Switches the remote to title input mode.  
When using the remote, point it at the remote sensor g on the MD deck.  
3 V DC, two R6 (size-AA) batteries  
About 6 months  
(Depends on frequency of use.)  
To label  
Make sure that the deck is  
ENTER: Serves the same function as the “YES” button on the MD deck.  
A track  
Playing, pausing, recording the track to be labeled, or  
stopped after locating the track to be labeled  
CANCEL: Serves the same function as the “NO” button on the MD deck.  
Dimensions (approx.) (w/h/d)  
191 x 32 x 110 mm  
(7 5/ x 1 5/ 16 x 4 3/ 8 in.)  
8
}
]
An MD  
Stopped with no track number appearing in the display  
Mass (approx.)  
225 g (8 oz) (Not incl. batteries)  
R6 (size-AA) batteries (2)  
Supplied accessories  
2
Select the character type.  
Synchro-Recording With a Sony Video  
CD Player  
To select uppercase letters, press CAPS. To select lowercase letters,  
press SML. The selected button lights up.  
Design and specifications are subject to change without notice.  
3
4
Enter one character at a time.  
This remote allows you to switch between synchro-recording with a Sony  
CD player or synchro-recording with a Sony video CD player.  
To select the video CD player, press button number 2 while pressing  
down the space button.  
z When to replace batteries  
Repeat steps 2 and 3 until you have entered the entire title.  
Troubleshooting  
With normal use, the batteries should last for about six months.  
When the remote no longer operates the deck, replace all the batteries  
with new ones.  
If you entered the wrong character  
Press 0 or ) until the character to be corrected starts flashing.  
Press CANCEL to erase the incorrect character, then enter the correct  
one.  
To select the CD player, press button number 1 while pressing down the  
space button.  
If you experience any of the difficulties while using the remote, use this  
troubleshooting guide to help you remedy the problem. Should any  
problem persist, consult your nearest Sony dealer.  
The remote is factory set to synchro-recording with a CD player.  
Notes  
5
Press NAME again.  
The remote is too far away from the MD deck.  
Do not leave the remote near an extremely hot or humid place.  
Do not drop any foreign object into the remote casing, particularly  
when replacing the batteries.  
The entered title appears in the display after the label has been  
recorded.  
/ Use the remote no farther than 7 m from the MD deck.  
There is an obstacle in front of the remote sensor on the MD deck.  
When Using This Remote With the MD  
Deck MDS-S37  
Do not expose the remote sensor to direct sunlight or lighting  
apparatuses. Doing so may cause a malfunction.  
If you dont use the remote for an extended period of time, remove the  
batteries to avoid possible damage from battery leakage and corrosion.  
To cancel labeling  
Press p.  
/ Remove the obstacle.  
The batteries have run down.  
/ Replace both batteries.  
When labeling with the MDS-S37, be sure to first disconnect the AU bus  
cable.  
Changing an existing title  
1 Do step 1 of “Labeling Tracks and MDs.”  
2 Keep pressing CANCEL until the current title is erased.  
3 Do steps 2 to 5 of “Labeling Tracks and MDs.”  
The remote sensor is exposed to intense light.  
/ Do not expose the remote sensor to direct sunlight or lighting  
apparatuses.  
Note  
Characters cannot be input by this remote if the MDS-S37 AU bus cable is  
connected.  
 

Sharp Blu ray Player BD HP75U User Manual
Snapper Snow Blower SS5220E User Manual
Sony Car Satellite TV System TU 1041U User Manual
Sony MP3 Player SRF M85W User Manual
Sony Stereo System 3 300 703 112 User Manual
Spin Master Motorized Toy Car Boeing Delta Air Rocket User Manual
Spirit Home Gym EL1 User Manual
Star Micronics Printer ZA 200 User Manual
State Industries Water Heater 195115 000 User Manual
SVAT Electronics Caller ID Box CID100 User Manual