SJ10 Fine-Wire Stapler
This durable, fine-wire SENCO
air-powered tool is designed for
professional performance. Various
SJ10 models drive staples ranging
in length from 1/8" to 5/8", and have
excellent power-to-weight ratio for
greater production output.
Features:
• Lightweight and well-balanced (only 1.7 pounds) – easy to
handle in numerous applications
• No lubrication required – no more worrying about oil damaging
the work surface
• Rear exhaust – away from the work area
• Speedy action – drives up to 15 staples per second
• Versatile – various models drive a wide range of staple types –
lengths from 1/8" to 5/8" in different crowns and gauges
• E-Z Load – reloads in seconds
• Can use compact air source – 1/2–HP compressor 1.9 CFM
at 70 to 90 psig
• Good line-of-sight for precise staple placement.
• Trouble-free design – fewer moving parts mean less downtime
• No special skills required for service and maintenance – you
can do 90% of all such jobs yourself in 15 minutes or less
with SENCO Parts Kits
The SENCO Model SJ10 has features not found in competitive
fine-wire staplers. The SJ10 drives an unusually wide variety
of staples in different crowns and gauges and is extremely
lightweight (only 1.7 pounds), well-balanced, and ergonomically
designed. In addition, its new rounded body improves
line-of-sight to the work surface.
• Special-application accessories available
Applications:
• Upholstering operations
• Furniture assembly
• Cabinets
• Automotive vinyl roofs and interior trim
• Home insulation
• Bedding manufacture
• TV and stereo grille cloth
• Picture frames
• Shoemaking
• Molding
• Roofing felt
Tool Specifications:
Tool Weight (Empty): 1.7 pounds (.8kg)
Height: 5 15/16" (151mm)
Length: 9 7/16" (240mm)
Lip Length: 11/16" (18mm)
Tool Width: 1 15/16" (49 mm)
Fastener Capacity: 110-185 depending on tool model
Recommended Operating Pressure:
50 psig Minimum (3.5 bar)
95 psig Maximum (6.6 bar)
|