DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes SIX (6) 12V AR70 lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Comments
Prepared by
SPECIFICATION FEATURES
A... Housing
D... Electrical
+ hex louver + snoot). 45º x 45º locking
Housing and junction box are aluminum,
Integral electronic or magnetic low voltage lamp adjustment. Beveled-edge lamp
COMBOLIGHT®
Next Generation
Recessed
trim assembly is steel with powder coated transformers. Transformers and electrical
ring is secured with threadless, bayonet
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
are mounted in a separate metal enclosure action. Optional retractable arm is avail-
box attached to the junction box with 18” able for lamp pulldown and extreme
of flexible conduit. Transformer enclosure
aiming. Double contact bayonet base
sockets included.
the inner hardware of the fixture from sight includes a separated wiring compart-
Multi-Lamp Fixture
below the ceiling. Can accommodate
various ceiling thickness.
ment and six knockouts for conduit entry.
Transformer enclosure features perforated F ... Mounting
metal door for easy maintenance access
and cooler operation. Entire electrical
A mounting frame is provided which
inserts into the ceiling opening. The
B... System Protection:
Six (6) Light
12V AR70
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
assembly (jbox and transformer enclosure) housing is then pushed through the
is removable from the housing for easy
maintenance.
mounting frame and secured with
screws.
G... Labels
E ... Lamps
Six (6) 12V AR70 lamps mounted in
Remodel Housing
w/ 0.75” Trim Flange
cULus listed for non-type IC
applications, suitable for use in damp
locations.
C... Junction Box
Junction Box is UL listed for through branch adjustable double gimbal. Lamp holders
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
Ceiling Cut-Out: 5.90” x 28.96”
listed as ‘access above ceiling not required’. up to three optical accessories (i.e. lens
Double
Gimbal
9.27”
30.67”
45º x 45º
Adjust
7.95”
1.60”
29.37”
6.15”
7.45”
Required
above
ceiling
28.70”
27.87”
24.66”
4.65”
Integral Low Voltage
Transformers
4.65”
9.25”
Separate Wiring Compartment
Thermal
Protector
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
ORDERING INFORMATION
C6
R
T
Configuration
Lamp Type / Wattage Label
Power Supply
Voltage
1
2
Lamp Mechanism
Trim Finish
C6 = COMBOLIGHT
Recessed Six (6) Light
050A70 = 50 Watt max. AR70 12V
G = Double Gimbal
W = White
= 120V
= 277V
= Retractable Double Gimbal
B
S
= Black
R
= Industrial Silver
Housing
Power Supply
Trim Flange
T = 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
R = Remodel
E = Electronic Low Voltage
Transformer
Finish
W = White
M = Magnetic Low Voltage
Transformer
B
S
= Black
= Industrial Silver
rev 022408
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
|