Philips Cordless Telephone CD530 User Manual

EN  
Welcome  
Quick start guide  
Connect  
1
2
3
Install  
Enjoy  
 
EN  
Connect  
1
Connect the base station  
1. Place the base station in a central location near the telephone line socket and electricity sockets.  
2. Connect the line cord and the power cable to proper connector at the back of the base station.  
B
A
2 .  
1.  
Connect the  
line cord to  
the line  
Connect  
the power  
supply A  
socket  
B
3. Connect the other end of the line cord to the telephone line socket and the other end of the power  
cable to the electricity socket.  
Install  
2
Insert batteries and charge  
Insert batteries  
Charge handset for 24 hours  
Set date and time  
1. Press mMENU.  
2. Scroll : to Clock & Alarm and press mSELECT.  
3. Press mSELECT to enter Set Date/Time.  
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT.  
Now, you are ready to use your phone.  
3
 
   
Enjoy  
3
Make a call  
Enter the phone number and press r.  
OR  
Press r and enter the phone number.  
Answer a call  
When the phone rings, press r key.  
End a call  
Press e key.  
Adjust earpiece volume during a call  
Press : to select from <VOLUME 1> to <VOLUME 5>.  
Set the ring melody  
1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter  
Handset Tones, scroll : to Ring Melody and press mSELECT.  
2. Scroll : to your desired melody to play the melody.  
3. Press mSELECT to set the ring melody.  
A confirmation beep is emitted and the screen returns to previous menu.  
Store a contact in the phonebook  
1. Press mMENU, scroll : to Phonebook and press mSELECT, press mSELECT to enter  
New Entry.  
2. Enter the name of the contact (maximum 12 characters) and press mOK.  
3. Enter the number (maximum 24 digits) and press mOK.  
4. Enter the SMS Box number and press mOK. (The default SMS Box is 0. To modify, press  
>CLEAR and then enter the number (0 to 9).)  
5. Scroll : to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press  
mSELECT to confirm.  
A long confirmation beep tone is emitted.  
Access the phonebook  
1. Press d in stand-by mode or press mMENU, scroll : to Phonebook and press mSELECT,  
scroll : to List Entry and press mSELECT.  
2. Press : to browse the phonebook.  
4
 
 
EN  
Switch the handset On/Off  
Press and hold e key for 5 seconds to switch off the handset in stand-by mode.  
Short press e key to switch on the handset again.  
Keypad lock/unlock  
Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode.  
Paging  
1. Press p key on the base until the handset starts to ring.  
2. Once the handset is retrieved, press e to end the paging.  
Press  
To  
Enter the main menu from stand-by mode.  
m
Select the function displayed on the handset screen directly above it.  
Activate mute function during a call.  
Go to redial list from stand-by mode.  
Select the function displayed on the handset screen directly above it.  
>
r
e
Answer an incoming external or internal call.  
Insert R for operator services when on the line.  
Hang up a call.  
Long press from menu browing to return to stand-by mode, short press to return to  
previous menu.  
Long press in stand-by mode to switch off the handset, short press to switch on the  
handset again.  
Access call log from stand-by mode.  
Scroll up a menu list or go to the previous phonebook or call log record.  
Increase earpiece volume during a call.  
u
d
Go to the previous character in editing mode.  
Access phonebook from stand-by mode.  
Scroll down a menu list or go to the next phonebook or call log record.  
Decrease earpiece volume during a call.  
Go to the next character in editing mode.  
Initiate an internal call.  
c
v
Answer an incoming call in handsfree mode.  
Activate and deactivate the loudspeaker during a call.  
Dial # in stand-by mode.  
Long press to mute the ringer in stand-by mode.  
Insert a pause in dialling mode.  
#
Switch between upper and lower case in editing mode.  
Dial * in stand-by mode.  
Long press to activate and deactivate keypad lock.  
*
5
 
Troubleshooting  
For more information, please refer to p.51 of CD530 user manual and p.59 of CD535 user manual.  
Problem  
Solution  
No dialling tone  
Check the connections  
Charge the batteries for at least 24 hours  
Use the line cable provided  
Poor audio quality  
Move closer to the base station  
Move the base station at least one metre away from  
any electrical appliances  
Check connections  
Move closer to the base station  
The  
appear  
icon does not  
Caller Line Identification  
Check your subscription with your network operator  
(CLI) service does not work  
Need help?  
User Manual  
Refer to the User Manual that is supplied with your CD530/535.  
Online help  
6
 
Specifications are subject to change without notice.  
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.  
2006 © Koninklijke Philips Electronics N.V. All rights reserved.  
3111 285 26381  
 

Peavey Speaker QW 218 User Manual
Philips Flat Panel Television 15HF8442 User Manual
Philips Music Mixer PM3350A User Manual
Philips Stereo System CDC735 User Manual
Philips VCR SB630 User Manual
Pioneer DVD Player DVD 117 User Manual
Pioneer TV Receiver GEX P6400TV User Manual
Polaroid Digital Camera PDC 1075 User Manual
Poulan Snow Blower 436134 User Manual
Powermate Portable Generator PM054325001 User Manual