®
SWM Series Spectra®
Compact Wall Mount
Installation/Operation Manual
C293M (11/98)
1. Installation and servicing should only be done by qualified service personnel
and conform to all local codes.
1.0 WARNINGS
2. Installation shall be done in accordance with all local and national electrical
and mechanical codes utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times
the maximum specified load.
Please thoroughly familiarize yourself with the information in this
manual prior to installation and operation.
The SWM Series Spectra® Compact Wall Mount is designed to provide indoor and
outdoor wall mounting for Pelco’s pendant domes in the Spectra® and DF5 series.
The mount features cable feedthrough that conceals the electrical wiring to the
dome back box. A 1-1/2" NPT pipe thread is provided in the mount to attach the
pendant dome. Anti-seize compound is supplied to be applied to the pipe thread.
The sun shield used for the outdoor versions of the pendant dome back boxes is
readily accepted by the mount.
2.0 DESCRIPTION
The mount can be attached to any vertical load-bearing surface or to an SWM-PA
Series pole adapter by means of a mounting cleat. A gasket is affixed to the base
to protect the interior from moisture.
The mount is constructed of aluminum and has either a light gray or black polyester
powder coat finish.
2.1 MODELS
SWM-GY
SWM-BK
Compact wall mount with cable feedthrough for use with
Spectra® SD5 or DF5 Series pendant domes. Gray finish.
Same as SWM-GY, except black finish.
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
4.0 SPECIFICATIONS
MECHANICAL
Construction:
Cast aluminum
Finish
SWM-GY:
SWM-BK:
Gray polyester powder coat
Black polyester powder coat
Mount Method:
Mount is secured by a set screw to a mounting cleat that
is attached to a surface with two fasteners (not supplied).
A gasket is affixed to the base to protect the interior from
moisture. An adjustment plate is provided to allow the wall
mount to be shimmed when the mounting surface is not
plumb. The lower hole in the mounting cleat is elongated,
which allows for vertical alignment adjustment.
Dome Mounting:
Cable Entry:
1-1/2" NPT pipe thread in mount tip. Anti-seize
compound is supplied to be applied to the pipe threads.
One cable feedthrough hole in the mounting cleat. Cable
feeds through the mount into the pendant dome.
Maximum Load:
GENERAL
Environment:
Dimensions:
Weight:
10 lb (4.5 kg)
Indoor/outdoor
See Figure 2
Unit
Shipping
1.1 lb (0.50 kg)
2.0 lb (0.91 kg)
(Design and product specifications subject to change without notice.)
4.15
(10.54)
2.54
(6.45)
6.25
(15.88)
3.10
(7.87)
NOTE: VALUES IN PARENTHESES ARE IN CENTIMETERS; ALL OTHERS ARE INCHES.
Figure 2. SWM Dimension Drawing
Pelco Manual C293M (11/98)
3
5.0 WARRANTY AND
WARRANTY
RETURN INFORMATION Pelco will repair or replace, without charge, any merchandise proved defective in material or workman-
ship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
• Five years on FT/FR8000 Series fiber optic products.
• Three years on Genex® Series products (multiplexers, server, and keyboard).
• Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X,
CC3751H-2, CC3651H-2X, MC3651H-2, and CC3651H-2X camera models, which have a five-year
warranty.
• Two years on standard motorized or fixed focal length lenses.
• Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.
• Two years on Spectra®, Esprit®, ExSite™, and PS20 Scanners, including when used in continuous
motion applications.
• Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
• Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and
Endura™ Series distributed network-based video products.months on DX Series digital video
corders, NVR300 Series network video recorders, Endura™ Series distributed network-based video
products, and TW3000 Series twisted pair transmission products.
re-
• One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a
period of six months.
• Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications
(that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All
goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made
necessary by reason of misuse, alteration, normal wear, or accident are not covered under this
warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the spe-
cific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of
contract, negligence, infringement of any rights of any party or product liability, relating to the Products
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable
for any special, incidental or consequential damages (including loss of use, loss of profit and claims of
third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional
rights, which are subject to variation from state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to
obtain a Repair Authorization number (RA), and provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the warranty condi-
tions stated above, please include a written explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which the item was received by
Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800)
289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and
RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and
freight should be prepaid. Ship to the appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to
return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy, and Camclosure are registered trademarks of Pelco.
™ Endura and ExSite are trademarks of Pelco.
© Copyright 1998, Pelco. All rights reserved.
4
Pelco Manual C293M (11/98)
|