Release Notes
Axis IP Cameras Supported on Digital Sentry
Integral Digital Sentry® digital video management systems (DVMS) support certain
Axis® IP camera models. The camera models listed in this document can be used with
Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s
table for information about the hardware and software features validated for use on a
Digital Sentry system. Any general limitations or special instructions are listed at the
beginning of the document, and any model-specific information is listed after each table.
For information about the general usage of each camera, refer to the camera
manufacturer’s documentation.
A single AXIS driver in DSAdmin controls all supported AXIS cameras.
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer
AXIS 206, AXIS 207, AXIS 207W
Firmware
N/A
Supported Resolutions
Frames per Second (FPS)
Number of Quality Settings
Supported Codec
640 x 480 maximum
1 to 30
10
MJPEG
Supported Motion Detection Integral, In-Camera
Pan/Tilt/Zoom (PTZ)
Not available
C1002RN (1/09)
Page 1 of 4
AXIS 213 PTZ, AXIS 214 PTZ, AXIS 231D+, AXIS 232D+
Firmware
N/A
Supported Resolutions
FPS
704 x 480 maximum
1 to 30
Number of Quality Settings
Supported Codec
10
MJPEG, MPEG-4
Supported Motion Detection Integral, In-Camera
PTZ
Yes
AXIS 216FD
Firmware
N/A
Supported Resolutions
FPS
640 x 480 maximum
1 to 30
Number of Quality Settings
Supported Codec
10
MJPEG, MPEG-4
Supported Motion Detection Integral
PTZ
Not available
AXIS 223M
Firmware
4.41
Supported Resolutions
MJPEG: 1600 x 1200 maximum
MPEG-4: 640 x 480 maximum
FPS
1 to 9
Number of Quality Settings
Supported Codec
10
MJPEG, MPEG-4
Supported Motion Detection Integral, In-Camera
PTZ
Not available
NOTES:
• Camera quality settings in DSAdmin are not supported when using MPEG-4
compression with AXIS 223M cameras.
• Complex video scenes at high quality settings are not supported at
1600 x 1200 resolution when using AXIS 223M cameras on Digital Sentry systems.
C1002RN (1/09)
Page 3 of 4
AXIS 225FD
Firmware
N/A
Supported Resolutions
FPS
640 x 480 maximum
1 to 30
Number of Quality Settings
Supported Codec
10
MJPEG, MPEG-4
Supported Motion Detection Integral, In-Camera
PTZ
Not available
AXIS 233D
Firmware
4.40
Supported Resolutions
704 x 480, 704 x 240, 352 x 240,
176 x 120
FPS
1 to 30
Number of Quality Settings
MJPEG: 11
MPEG-4: 23
Supported Codec
MJPEG, MPEG-4
Supported Motion Detection Integral, In-Camera
PTZ
Yes
Contact Information
Pelco Worldwide Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada: Tel: (800) 289-9100, Fax: (800) 289-9150
International: Tel: +1(559) 292-1981, Fax: +1(559) 348-1120
Document Revision History
Document #
Date
Comments
C1002RN
1/09
Original version.
Pelco, the Pelco logo, and Digital Sentry are registered trademarks of Pelco, Inc.
Axis is a registered trademark of Axis Communications.
© Copyright 2009, Pelco, Inc. All rights reserved.
Page 4 of 4
C1002RN (1/09)
|