Step 4
Carefully position monitor so that Wall and
Monitor Plates are vertically aligned, with the
bottom of Monitor plate overlapping the top of
the Wall Plate by approximately 1”.
1
Gently lower monitor into position, sliding the
two plates together until the Monitor Plate
bottoms out. (Fig. 3)
2
Flat Panel Fixed Mount
INSTALLATION GUIDE
Cautioon: Make sure that the plates are engaged
on both sides of the mount before releasing grip
on monitor.
3
Fig 3
Item No.:PWLB006
Step 5
Install two Safety Bolts (3) through bottom of Wall Plate.
(Fig. 3)
Caution :
This Product LCD /Plasma Wall Mount Bracket is
intended for use only with the maximum weights indicated .See apparatus
instructions .Use with products heavier than the maximum weights
indicated may result in instability causing possible injury .
TV Size Rang:10"-24"
Universal VESA mount
Low profile: only 17mm from wall
Easy to install: sliding plate operation
Max load capacity:15Kg/33lbs
-4-
IMPORTANT: If don’t understand about right install ways, please
consult to normal installing specialist.
|