JVC CRT Television AV 14A17 User Manual

COLOUR TELEVISION  
INSTRUCTIONS  
Contents  
Safety precautions......................... 2  
Connections .................................. 3  
Initial settings................................. 3  
Remote control buttons  
and functions................................. 4  
AV-21B17  
AV-14A17  
AV-14AMG7  
AV-14U17  
AV-14UMG7  
AV-14UMG7B  
TV buttons and functions............... 4  
Using the TV’s MENU.................... 5  
Presetting TV channels ................. 6  
Using the timer .............................. 7  
Playing game................................. 7  
AV-21BMG7  
AV-21BMG7B  
AV-21BMG7S  
AV-21Q17  
AV-21QMG7  
AV-21QMG7B  
AV-21Y17  
Sound and Colour system in your  
country or region ........................... 7  
Troubleshooting............. Back cover  
Specications ................ Back cover  
AV-21YMG7  
AV-21YMG7B  
This illustration shows AV-14UMG7.  
The illustrations of AV-14UMG7 is used in this instruction manual for explanation  
purpose. Your TV may not look exactly the same as illustrated.  
GGT0130-001B-H  
 
Connections  
Initial settings  
Turn on the TV.  
1
CAUTION  
or wait 15 seconds to run Setup Tour  
Ensure to turn off all equipments including the TV before connecting the  
AC mains plug to the AC outlet.  
JVC logo appears.  
Connecting to the aerial cable and VCR  
TV rear terminals  
VHF/UHF  
outdoor aerial  
* This illustration  
Select a language.  
LANGUAGE  
Searching for the channels.  
AUTO PROGRAM  
2
shows AV-14UMG7.  
VH  
FRANÇAIS  
OK  
: AUTO PROGRAM  
OK : MANUAL PROGRAM  
: BACK  
DISPLAY  
MENU  
: EXIT  
75-ohm coaxial  
cable (not supplied)  
Select  
to stop or wait until AUTO  
PROGRAM nishes  
OR  
Proceed to AUTO PROGRAM  
Note  
This Language Menu’s on screen is used for explanation purpose only.  
Your TV may not show the same as this on screen.  
Search a channel manually or ne-tune a channel.  
MANUAL PROGRAM  
3
PR  
05  
06  
07  
08  
09  
CH / CC  
B/G CC 06  
B/G CH 05  
B/G CH 08  
B/G CH 10  
B/G CH 12  
To perform manual  
search and ne-tune  
(FINE), \ page 6.  
VCR  
VCR (for recording)  
or  
VOLUME-/+ : SEARCH-/+  
: FINE-/+  
DISPLAY : SOUND SYSTEM  
To complete  
Setup Tour  
/
Connecting to the TV front terminals  
* This illustration shows AV-14UMG7.  
To restart Setup Tour after above setup has completed  
(while the cursor is pointing to PICTURE  
MODE and within 3 seconds)  
Headphones  
TV front terminals  
Camcorder  
TV game  
After all the connections have been made, insert the mains  
plug to the AC outlet.  
If you press  
when LANGUAGE is displayed (Step 2), the screen will exit to MENU.  
3
 
Remote control buttons and functions  
Select PICTURE MODE (\ page 5)  
Turn the TV on from standby and vice versa  
Set OFF TIMER (\ page 7)  
Select ECO MODE (\ page 5)  
RETURN PLUS function  
Return to the frequently viewed channel.  
Select programme number  
Choose the channel you want to programme  
RETURN PLUS  
PROGRAMMED!  
Press and hold  
To cancel  
For two digits programme number  
RETURN PLUS  
CANCELED!  
Press and hold  
RETURN function  
If you have not set or have canceled the RETURN PLUS  
channel, this will return to the previously viewed channel.  
Select TV or video input  
Operating the menus (\ page 5)  
Turn the volume Off / On  
Display the programme number or video terminal number.  
Adjust the volume level, Turn off Muting  
Select Channel  
Select the desired channel number.  
For Hyper Scan:  
PR changes without changing the picture. Once  
you stop pressing CHANNEL+ or CHANNEL-  
button, picture will change to the desired PR.  
Press and hold  
TV buttons and functions  
* This illustration shows AV-14UMG7.  
POWER lamp - Indicates the TV’s status.  
No colour : TV’s main power is being turned off.  
Adjust volume level  
Select Channel  
Red  
Blink  
: TV’s main power is being turned on.  
: While the TV is in standby mode, ON  
TIMER function is in used. While the  
TV is in turn on mode, OFF TIMER  
function is in used.  
Video and audio input jack  
Headphone jack  
POWER /  
ON TIMER  
Note: When you turn off the power switch while  
TV is in standby mode, the power lamp will go  
off in 5 -10 seconds. When you operate the TV,  
POWER Lamp will blink.  
Display the TV’s MENU,  
Exit after nish setting  
Remote control TV’s main  
sensor  
power on/off  
4
 
Using the TV’s MENU  
ON TIMER  
OFF TIMER  
AI VOLUME  
Turns on the TV from standby mode (\ page 7)  
Turns off the TV to standby mode (\ page 7)  
Operating the menus  
Display MENU  
ON  
Sets the volume level for all  
channels and video inputs  
MENU  
(1 / 3)  
Showing MENU  
page 1 of 3  
PICTURE MODE  
PICTURE SETTING  
WHITE BALANCE  
ECO MODE  
ON TIMER  
OFF TIMER  
automatically depends on the  
strength of signal from the source.  
NORMAL  
/ Select function, go to  
previous/next page  
OFF  
Volume can be adjusted individually  
for each channel  
CHILD LOCK  
BLUE BACK  
ON  
Disable the front buttons of the TV  
Cancel the function  
On-screen guide  
OFF  
ON  
/
Display function setting.  
Displays a blue screen and mutes  
the sound when signal from the  
aerial is weak or absent  
/
Change setting  
OFF  
AUTO  
Cancel the function  
Effect of VNR is automatically  
controlled  
VNR  
To return to previous screen  
To exit from Menu or  
To reduces the picture  
noise  
MIN  
MAX  
OFF  
Effect of VNR becomes minimum  
Effect of VNR becomes maximum  
Cancel the function  
Description  
(Setting / Adjustment)  
MENU  
Item  
GAME  
Select a game to play (PUZZLE / TWINS)  
(\ page 7)  
PICTURE MODE  
USER  
Change picture settings  
(\ PICTURE SETTING)  
LANGUAGE  
AUTO PROGRAM  
MANUAL PROGRAM  
Choose your desired on screen display language.  
Automatically registers channels (\ page 6)  
VIVID Heightens contrast and sharpness  
SOFT Softens contrast and sharpness  
CONTRAST Adjust contrast (Lower j Higher)  
Manually search channels and fine-tunes  
channels (\ page 6)  
PICTURE SETTING  
INSERT / DELETE  
COLOUR SYSTEM  
Add, delete and move registered channels  
(\ page 6)  
BRIGHT  
Adjust brightness  
(Darker j Brighter)  
PICTURE SETTING can  
operate when PICTURE  
MODE is set to USER  
(\ PICTURE MODE)  
Select the appropriate system  
In TV mode :  
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /  
AV-21Y17 : AUTO / PAL / SECAM)  
(Other models : AUTO / PAL / SECAM /  
NTSC3.58 / NTSC4.43)  
In VIDEO mode (All models) :  
(AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43)  
(\ page 7)  
SHARP  
Adjust sharpness  
(Softer j Higher)  
COLOUR  
TINT  
Adjust colour (Lighter j Deeper)  
Adjust colour tint  
(Reddish j Greenish)  
On screen scale colour  
Center position : Yellow  
Others position : Green  
RESET  
NORMAL  
COOL  
WARM  
OFF  
Reset all items level to center  
Normal white balance  
Bluish white  
WHITE BALANCE  
SOUND SYSTEM  
Select the appropriate system  
Reddish white  
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /  
AV-21Y17 :BG / I / DK) (Other models : BG / I /  
DK / M) (\ page 7)  
ECO MODE  
Cancel the function  
Mild contrast (recommended)  
Even contrast  
Adjust picture contrast  
according to room  
brightness  
ECO-1  
ECO-2  
5
 
Presetting TV channels  
AUTO PROGRAM  
INSERT / DELETE  
After this operation, other channel's PR number will be changed.  
MENU  
AUTO PROGRAM  
1
2
MENU  
INSERT / DELETE  
1
2
AUTO PROGRAM  
INSERT / DELETE  
PR  
05  
06  
07  
08  
09  
CH / CC  
B/G CC 06  
B/G CH 05  
B/G CH 08  
B/G CH 10  
B/G CH 12  
VH  
or  
or  
OK : MANUAL PROGRAM  
VOLUME+ : INSERT  
MOVE  
MUTING : DELETE  
3
4
to stop or when AUTO PROGRAM nishes.  
To add the new  
channel (INSERT)  
1. Select the PR number you wish to store the new  
channel.  
2. Press the VOLUME+ button.  
3. Press button to choose “CH” or “CC”.  
4. Enter the CH/CC number for the channel you wish to  
add. The TV starts to search for the channel.  
Certain channels are not available in some countries.  
If you cannot receive a channel by INSERT, use  
MANUAL PROGRAM.  
3
MANUAL PROGRAM screen appears (\ MANUAL PROGRAM).  
MANUAL PROGRAM  
MENU  
MANUAL PROGRAM  
1
2
To delete a  
channel (DELETE)  
MANUAL PROGRAM  
Select the channel you wish to delete and press  
.
PR  
05  
06  
07  
08  
09  
CH / CC  
B/G CC 06  
B/G CH 05  
B/G CH 08  
B/G CH 10  
B/G CH 12  
To change the PR 1. Select the PR number you wish to move.  
number (MOVE)  
or  
2. Press the button.  
3. Press or button to move it to the new PR number.  
4. Press button.  
VOLUME-/+ : SEARCH-/+  
: FINE-/+  
DISPLAY : SOUND SYSTEM  
/
4
To search for a  
channel manually  
(SEARCH)  
1. Select the PR number you wish to store the  
channel.  
2. Press the VOLUME +/- button to start searching  
from the present channel. Searching stops when  
the following channel is found.  
3
4
to exit.  
Channel table  
CH/CC  
CCIR  
E2  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
E10  
E11  
E12  
OIRT  
R1  
CH/CC  
CH21  
CH22  
CCIR  
E21  
E22  
OIRT  
CH/CC  
CC01  
CC02  
CCIR  
S-1  
S-2  
OIRT  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
CH09  
CH10  
CH11  
CH12  
To ne-tune a channel 1. Select the channel you wish to ne-tune.  
2. Press the or button until a clear picture is  
obtained.  
(FINE)  
R2  
R6  
R7  
R8  
R9  
If noisy sound is heard  
and unsuitable sound  
system for your broad-  
casting (\ Page 7)  
1. Press DISPLAY button then on screen will  
change to Sound System,  
2. Choose an appropriate sound system.  
CC41  
CC75  
CC76  
CC77  
CC78  
CC79  
S-41  
X
Y
Z
Z+1  
Z+2  
R3  
R4  
R5  
R10  
R11  
R12  
CH69  
E69  
to exit.  
CCIR: Middle East, Southeast Asia, etc..  
OIRT: Russia etc..  
6
 
Using the timer  
Playing game  
MENU  
GAME  
1
2
ON TIMER  
Select a game.  
MENU  
ON TIMER  
1
2
PUZZLE  
TWINS  
This game needs you to rearrange the numbers 1 to 15 in order  
by swapping the blank card with the numbered card.  
or  
ON TIMER  
This game needs you to nd all the matching pairs of cards. If  
you open a correct pair, the card will stay uncovered. If you miss,  
they will ip back.  
Choose the PR (channel) that you want to watch when the TV turns  
on. External input, AV position and any un-preset channel cannot be  
chosen for PR.  
3
4
5
Instructions to play  
Left  
Up  
Set the ON TIMER to your desired period of time. When the ON TIMER  
is set to other than 00:00, the ON TIMER is activated. You can set the  
period of time to a maximum of 12 hours in 15-minute intervals.  
OR  
Down  
Right  
To move  
Down  
Up  
To move  
Left  
Right  
To off the ON TIMER, set the time to 00:00.  
To open a card (TWINS only)  
To restart the game  
To exit the game  
OFF TIMER  
Sound and Colour system in your country or region  
1
Sound Colour  
System System  
Area  
Country or Region  
MENU  
OFF TIMER  
Bahrain, Kuwait, Oman, Qatar, United Arab  
Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore, Thailand, India, etc  
B/G  
PAL  
D/K  
Asia,  
Middle  
East  
Note You can select OFF TIMER function by direct key.  
China, Vietnam, etc.  
Hong Kong, etc.  
I
You can set the period of time to a maximum of 120 minutes in 10  
minutes intervals.  
2
3
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
B/G  
M
SECAM  
NTSC  
SECAM  
D/K  
When the remaining elapse time is one minute, “GOOD NIGHT!”  
appears on the screen.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
B/G  
PAL  
I
B/G  
I
You can display the OFF TIMER screen again to conrm or change  
the remaining time.  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
Oceania  
Africa  
PAL  
PAL  
4
5
B/G  
Egypt, Morocco, etc.  
SECAM  
7
To off the OFF TIMER, select OFF or turn off the TV’s main power.  
 
Troubleshooting  
If a problem occurs when you are using the TV, check the below trouble-  
shooting guide before calling for repair.  
Specications  
TV RF systems AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 / AV-21Y17 :  
B, G, I, D, K  
Others models : B, G, I, D, K, M  
Problem  
No or poor picture  
Cause / Solution  
Colour systems AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 / AV-21Y17 :  
PAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz  
(in VIDEO mode only)  
• Turn OFF BLUE BACK if it is ON. (\ page 5)  
• Adjust the COLOUR or BRIGHT setting. Refer to  
“PICTURE SETTING”. (\ page 5)  
• Choose the appropriate colour system. (\ page 5)  
• Check the aerial and TV connections. (\ page 3)  
Others models : PAL, SECAM, NTSC 3.58 MHz /  
NTSC 4.43 MHz  
Snowy picture  
Stripes or coloured  
patches appeared  
Receiving  
channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
• Interference caused by electrical appliances or  
speakers. Move them away from the TV.  
Power requirements  
Double-picture  
(ghosting)  
• Interference caused by signal reflecting from mountains  
or buildings. Adjust the aerial’s direction or use another  
antenna.  
For Malaysia /  
Australia  
AC 160 to 240 V, 50 Hz / 60 Hz  
AC 110 to 240 V, 50 Hz / 60 Hz  
No or poor sound  
• Choose the appropriate sound system. (\ page 5)  
• Inevitable phenomenon due to the nature of the picture  
tube. This is not a malfunction.  
For others  
White and bright still  
image looks as if it is  
coloured  
External input / output  
INPUT  
VIDEO input, AUDIO input  
VIDEO output, AUDIO output  
Image from video input • The image was not properly recorded. This is not a  
is distorted  
OUTPUT  
malfunction.  
• Replace the batteries. (\ page 2)  
• Operate it at less than 7 meters from the TV.  
• Exit and enter the MENU again.  
• Turn OFF CHILD LOCK if it is ON.  
Headphone jack Stereo mini jack (3.5 mm diameter)  
Cannot operate the  
remote control  
Design and specications are subject to change without notice.  
Cannot operate the  
MENU  
Cannot operate the  
front panel buttons  
Image takes a while to • Image requires time to stabilize before display.  
be displayed  
This is not a malfunction.  
• Caused by a sudden change in temperature and it is not  
a malfunction. Call a service technician for inspection.  
TV emits crackling  
sound  
Static shock when  
touch the TV screen  
The TV turns off  
suddenly  
• Caused by static electricity of the picture tube and it will  
not harm the human body. This is not a malfunction.  
• This is not a malfunction. If you had set the BLUE  
BACK function to ON, TV will be turned off automatically  
when no signals are received from an antenna for about  
15 minutes or longer.  
© 2007 Victor Company of Japan, Limited  
0307SCT-NF-MT  
 
COLOUR TELEVISION  
INSTRUCTIONS  
Contents  
Safety precautions......................... 2  
Connections .................................. 3  
Initial settings................................. 3  
Remote control buttons  
and functions................................. 4  
AV-2100BE  
AV-2100QE  
AV-2100YE  
AV-1400AE  
AV-1410AE  
AV-1400UE  
AV-1410UE  
TV buttons and functions............... 4  
Using the TV’s MENU.................... 5  
Presetting TV channels ................. 6  
Using the timer .............................. 7  
Playing game................................. 7  
Sound and Colour system in your  
country or region ........................... 7  
Troubleshooting............. Back cover  
Specications ................ Back cover  
This illustration shows AV-1400UE.  
The illustrations of AV-1400UE is used in this instruction manual for explanation  
purpose. Your TV may not look exactly the same as illustrated.  
GGT0144-001B-H  
 
Thank you for buying this JVC colour television.  
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.  
WARNING  
CAUTION  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE.  
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING  
RULES REGARDING THE USE OF THIS TV.  
• The apparatus shall not be exposed to  
dripping or splashing and that no objects  
lled with liquids, such as vases, shall be  
placed on the apparatus.  
• Never block or cover the ventilation openings.  
• Never install the TV where good ventilation is unattainable.  
• When installing this TV, leave spaces for ventilation around the TV of  
more than the minimum distances as shown.  
Do not allow objects or liquid into the cabinet  
openings.  
• The surface of the TV  
screeniseasilydamaged.  
• Operate only from the power source  
indicated on the rear of the TV.  
Be very careful with it  
when handling the TV.  
Should the TV screen  
become soiled, wipe it with a soft dry cloth.  
Never rub it forcefully. Never use any  
cleaner or detergent on it.  
• Avoid damaging the power cord and mains  
plug. When unplugging the TV, grasp the  
mains plug. Do not pull on the power  
cord.  
• This TV can be turned on/off power by  
connecting/disconnecting the AC plug into  
AC outlet. While this TV is being installed,  
enough space should be reserved for  
connection/disconnecting the AC plug into  
AC outlet by hand.  
• Insert two batteries by  
following the  
and  
polarities and inserting  
the end rst.  
• Use AA/R6/UM-3 dry  
cell batteries.  
In the event of  
a fault, unplug the unit  
and call a service technician. Do  
not attempt to repair it yourself or  
remove the rear cover.  
POWER  
ON TIMER  
/
• If the remote control  
does not work properly, t new batteries.  
The supplied batteries are for testing, not  
regular use.  
2
 
Connections  
Initial settings  
Turn on the TV.  
1
CAUTION  
or wait 15 seconds to run Setup Tour  
Ensure to turn off all equipments including the TV before connecting the  
AC mains plug to the AC outlet.  
JVC logo appears.  
Connecting to the aerial cable and VCR  
TV rear terminals  
VHF/UHF  
outdoor aerial  
* This illustration  
Select a language.  
LANGUAGE  
Searching for the channels.  
AUTO PROGRAM  
2
shows AV-1400UE.  
VH  
УKPAЇHCЬKA  
OK  
: AUTO PROGRAM  
: BACK  
OK : MANUAL PROGRAM  
DISPLAY  
MENU  
: EXIT  
75-ohm coaxial  
cable (not supplied)  
Select  
to stop or wait until AUTO  
PROGRAM nishes  
OR  
Proceed to AUTO PROGRAM  
Search a channel manually or ne-tune a channel.  
MANUAL PROGRAM  
3
PR  
06  
07  
08  
09  
10  
CH/CC  
D/K CC 10  
D/K CH 12  
D/K CH 29  
D/K CH 25  
D/K CH 35  
To perform manual  
search and ne-tune  
(FINE), \ page 6.  
or  
To complete  
Setup Tour  
VOLUME-/+ : SEARCH-/+  
/
DISPLAY  
: FINE-/+  
: SOUND SYSTEM  
VCR  
VCR (for recording)  
To restart Setup Tour after above setup has completed  
Connecting to the TV front terminals  
* This illustration shows AV-1400UE.  
(while the cursor is pointing to PICTURE  
MODE and within 3 seconds)  
If you press  
when LANGUAGE is displayed (Step 2), the screen will exit to MENU.  
Headphones  
TV front terminals  
Camcorder  
TV game  
After all the connections have been made, insert the mains  
plug to the AC outlet.  
3
 
Remote control buttons and functions  
Select PICTURE MODE (\ page 5)  
Turn the TV on from standby and vice versa  
Set OFF TIMER (\ page 7)  
Select ECO MODE (\ page 5)  
RETURN PLUS function  
Return to the frequently viewed channel.  
Select programme number  
Choose the channel you want to programme  
RETURN PLUS  
PROGRAMMED!  
Press and hold  
To cancel  
For two digits programme number  
RETURN PLUS  
CANCELED!  
Press and hold  
RETURN function  
If you have not set or have canceled the RETURN PLUS  
channel, this will return to the previously viewed channel.  
Select TV or video input  
Operating the menus (\ page 5)  
Turn the volume Off / On  
Display the programme number or video terminal number.  
Adjust the volume level, Turn off Muting  
Select Channel  
Select the desired channel number.  
For Hyper Scan:  
PR changes without changing the picture. Once  
you stop pressing CHANNEL+ or CHANNEL-  
button, picture will change to the desired PR.  
Press and hold  
TV buttons and functions  
* This illustration shows AV-1400UE.  
POWER lamp - Indicates the TV’s status.  
No colour : TV’s main power is being turned off.  
Adjust volume level  
Select Channel  
Red  
Blink  
: TV’s main power is being turned on.  
: While the TV is in standby mode, ON  
TIMER function is in used. While the  
TV is in turn on mode, OFF TIMER  
function is in used.  
Video and audio input jack  
Headphone jack  
POWER /  
ON TIMER  
Note: When you turn off the power switch while  
TV is in standby mode, the power lamp will go  
off in 5 -10 seconds. When you operate the TV,  
POWER Lamp will blink.  
Display the TV’s MENU,  
Exit after nish setting  
Remote control TV’s main  
sensor  
power on/off  
4
 
Using the TV’s MENU  
ECO MODE  
OFF  
Cancel the function  
Mild contrast (recommended)  
Even contrast  
Operating the menus  
Adjust picture contrast  
according to room  
brightness  
ECO-1  
ECO-2  
Display MENU  
MENU  
(1 / 3)  
Showing MENU  
page 1 of 3  
PICTURE MODE  
PICTURE SETTING  
WHITE BALANCE  
ECO MODE  
ON TIMER  
OFF TIMER  
ON TIMER  
OFF TIMER  
AI VOLUME  
Turns on the TV from standby mode (\ page 7)  
Turns off the TV to standby mode (\ page 7)  
NORMAL  
/ Select function, go to  
previous/next page  
ON  
Sets the volume level for all  
channels and video inputs  
automatically depends on the  
strength of signal from the source.  
On-screen guide  
/
Display function setting.  
OFF  
Volume can be adjusted individually  
for each channel  
CHILD LOCK  
BLUE BACK  
ON  
Disable the front buttons of the TV  
Cancel the function  
/
Change setting  
OFF  
ON  
Displays a blue screen and mutes  
the sound when signal from the  
aerial is weak or absent  
To return to previous screen  
To exit from Menu or  
OFF  
Cancel the function  
VNR  
AUTO  
Effect of VNR is automatically  
controlled  
Description  
(Setting / Adjustment)  
To reduces the picture  
noise  
MENU  
Item  
MIN  
MAX  
OFF  
Effect of VNR becomes minimum  
Effect of VNR becomes maximum  
Cancel the function  
PICTURE MODE  
USER  
Change picture settings  
(\ PICTURE SETTING)  
VIVID  
SOFT  
Heightens contrast and sharpness  
Softens contrast and sharpness  
GAME  
Select a game to play (PUZZLE / TWINS)  
(\ page 7)  
PICTURE SETTING  
CONTRAST Adjust contrast (Lower j Higher)  
LANGUAGE  
Choose your desired on screen display language.  
PICTURE SETTING can BRIGHT  
operate when PICTURE  
MODE is set to USER  
Adjust brightness  
(Darker j Brighter)  
AUTO PROGRAM  
MANUAL PROGRAM  
Automatically registers channels (\ page 6)  
Manually search channels and fine-tunes  
channels (\ page 6)  
SHARP  
Adjust sharpness  
(Softer j Higher)  
(\ PICTURE MODE)  
INSERT / DELETE  
COLOUR SYSTEM  
Add, delete and move registered channels  
(\ page 6)  
COLOUR  
Adjust colour (Lighter j Deeper)  
On screen scale colour  
Center position : Yellow  
Others position : Green  
RESET  
TINT  
Adjust colour tint  
(Reddish j Greenish)  
Select the appropriate system  
(In TV mode: AUTO / PAL / SECAM)  
(In VIDEO mode: AUTO / PAL / SECAM /  
NTSC 3.58 / NTSC 4.43) (\ page 7)  
Reset all items level to center  
Normal white balance  
Bluish white  
WHITE BALANCE  
NORMAL  
COOL  
SOUND SYSTEM  
Select the appropriate system (BG / I / DK)  
(\ page 7)  
WARM  
Reddish white  
5
 
Presetting TV channels  
AUTO PROGRAM  
INSERT / DELETE  
After this operation, other channel's PR number will be changed.  
MENU  
AUTO PROGRAM  
1
2
MENU  
INSERT / DELETE  
1
2
AUTO PROGRAM  
INSERT / DELETE  
PR  
01  
02  
03  
04  
05  
CH/CC  
D/K CC 20  
D/K CH 30  
D/K CH 40  
D/K CH 50  
D/K CH 60  
VH  
or  
or  
OK : MANUAL PROGRAM  
VOLUME+ : INSERT  
MOVE  
MUTING : DELETE  
3
4
to stop or when AUTO PROGRAM nishes.  
To add the new  
channel (INSERT)  
1. Select the PR number you wish to store the new  
channel.  
2. Press the VOLUME+ button.  
3. Press button to choose “CH” or “CC”.  
4. Enter the CH/CC number for the channel you wish to  
add. The TV starts to search for the channel.  
Certain channels are not available in some countries.  
If you cannot receive a channel by INSERT, use  
MANUAL PROGRAM.  
3
MANUAL PROGRAM screen appears (\ MANUAL PROGRAM).  
MANUAL PROGRAM  
MENU  
MANUAL PROGRAM  
1
2
To delete a  
channel (DELETE)  
MANUAL PROGRAM  
PR  
Select the channel you wish to delete and press  
.
CH/CC  
01  
02  
03  
04  
05  
D/K CC 20  
D/K CH 30  
D/K CH 40  
D/K CH 50  
D/K CH 60  
To change the PR 1. Select the PR number you wish to move.  
number (MOVE)  
or  
2. Press the button.  
3. Press or button to move it to the new PR number.  
4. Press button.  
VOLUME-/+ : SEARCH-/+  
/
: FINE-/+  
DISPLAY  
: SOUND SYSTEM  
4
To search for a  
channel manually  
(SEARCH)  
1. Select the PR number you wish to store the  
channel.  
2. Press the VOLUME +/- button to start searching  
from the present channel. Searching stops when  
the following channel is found.  
3
4
to exit.  
Channel table  
CH/CC  
CCIR  
E2  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
E10  
E11  
E12  
OIRT  
R1  
CH/CC  
CH21  
CH22  
CCIR  
E21  
E22  
OIRT  
CH/CC  
CC01  
CC02  
CCIR  
S-1  
S-2  
OIRT  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
CH09  
CH10  
CH11  
CH12  
To ne-tune a channel 1. Select the channel you wish to ne-tune.  
2. Press the or button until a clear picture is  
obtained.  
(FINE)  
R2  
R6  
R7  
R8  
R9  
If noisy sound is heard  
and unsuitable sound  
system for your broad-  
casting (\ Page 7)  
1. Press DISPLAY button then on screen will  
change to Sound System,  
2. Choose an appropriate sound system.  
CC41  
CC75  
CC76  
CC77  
CC78  
CC79  
S-41  
X
Y
Z
Z+1  
Z+2  
R3  
R4  
R5  
R10  
R11  
R12  
CH69  
E69  
to exit.  
CCIR: Middle East, Southeast Asia, etc..  
OIRT: Russia etc..  
6
 
Using the timer  
Playing game  
MENU  
GAME  
1
2
ON TIMER  
Select a game.  
MENU  
ON TIMER  
1
2
PUZZLE  
This game needs you to rearrange the numbers 1 to 15 in order  
by swapping the blank card with the numbered card.  
or  
ON TIMER  
TWINS  
This game needs you to nd all the matching pairs of cards. If  
you open a correct pair, the card will stay uncovered. If you miss,  
they will ip back.  
Choose the PR (channel) that you want to watch when the TV turns  
on. External input, AV position and any un-preset channel cannot be  
chosen for PR.  
3
4
5
Instructions to play  
Left  
Up  
Set the ON TIMER to your desired period of time. When the ON TIMER  
is set to other than 00:00, the ON TIMER is activated. You can set the  
period of time to a maximum of 12 hours in 15-minute intervals.  
OR  
Down  
Right  
To move  
Down  
Up  
Left  
Right  
To move  
To off the ON TIMER, set the time to 00:00.  
To open a card  
(TWINS only)  
To restart the game  
To exit the game  
OFF TIMER  
Sound and Colour system in your country or region  
1
Sound Colour  
System System  
Area  
Country or Region  
MENU  
OFF TIMER  
Bahrain, Kuwait, Oman, Qatar, United Arab  
Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore, Thailand, India, etc  
B/G  
PAL  
D/K  
Asia,  
Middle  
East  
Note You can select OFF TIMER function by direct key.  
China, Vietnam, etc.  
Hong Kong, etc.  
I
You can set the period of time to a maximum of 120 minutes in 10  
minutes intervals.  
2
3
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
B/G  
M
SECAM  
NTSC  
SECAM  
D/K  
When the remaining elapse time is one minute, “GOOD NIGHT!”  
appears on the screen.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
B/G  
PAL  
I
B/G  
I
You can display the OFF TIMER screen again to conrm or change  
the remaining time.  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
Oceania  
Africa  
PAL  
PAL  
4
5
B/G  
Egypt, Morocco, etc.  
SECAM  
7
To off the OFF TIMER, select OFF or turn off the TV’s main power.  
 
Troubleshooting  
If a problem occurs when you are using the TV, check the below trouble-  
shooting guide before calling for repair.  
Specications  
TV RF systems B, G, I, D, K  
Colour systems PAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz  
(in VIDEO mode only)  
Problem  
No or poor picture  
Cause / Solution  
Receiving  
channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
• Turn OFF BLUE BACK if it is ON. (\ page 5)  
• Adjust the COLOUR or BRIGHT setting. Refer to  
“PICTURE SETTING”. (\ page 5)  
Power  
requirements  
AC 160 to 240 V, 50 Hz / 60 Hz  
• Choose the appropriate colour system. (\ page 5)  
• Check the aerial and TV connections. (\ page 3)  
External input / output  
Snowy picture  
Stripes or coloured  
patches appeared  
INPUT  
VIDEO input, AUDIO input  
VIDEO output, AUDIO output  
• Interference caused by electrical appliances or  
speakers. Move them away from the TV.  
OUTPUT  
Double-picture  
(ghosting)  
• Interference caused by signal reflecting from mountains  
or buildings. Adjust the aerial’s direction or use another  
antenna.  
Headphone jack Stereo mini jack (3.5 mm diameter)  
Design and specications are subject to change without notice.  
No or poor sound  
• Choose the appropriate sound system. (\ page 5)  
• Inevitable phenomenon due to the nature of the picture  
tube. This is not a malfunction.  
White and bright still  
image looks as if it is  
coloured  
Image from video input • The image was not properly recorded. This is not a  
is distorted  
malfunction.  
• Replace the batteries. (\ page 2)  
Cannot operate the  
remote control  
• Operate it at less than 7 meters from the TV.  
• Exit and enter the MENU again.  
• Turn OFF CHILD LOCK if it is ON.  
Cannot operate the  
MENU  
Cannot operate the  
front panel buttons  
Image takes a while to • Image requires time to stabilize before display.  
be displayed  
This is not a malfunction.  
• Caused by a sudden change in temperature and it is not  
a malfunction. Call a service technician for inspection.  
TV emits crackling  
sound  
Static shock when  
touch the TV screen  
The TV turns off  
suddenly  
• Caused by static electricity of the picture tube and it will  
not harm the human body. This is not a malfunction.  
• This is not a malfunction. If you had set the BLUE  
BACK function to ON, TV will be turned off automatically  
when no signals are received from an antenna for about  
15 minutes or longer.  
© 2007 Victor Company of Japan, Limited  
0307SCT-NF-MT  
 

Indesit Dishwasher DG 6145 User Manual
Ingersoll Rand Heat Pump 650940 XXD B User Manual
Ingersoll Rand Water Dispenser 651418 100 B User Manual
Insignia MP3 Player NS DVB2G DVB4G User Manual
Insignia Portable DVD Player NS P7DVD15 User Manual
Jasco Home Security System 51147 User Manual
John Lewis Dishwasher JLBIDW 1201 User Manual
Kawasaki Riding Toy B9272 User Manual
KitchenAid Ice Maker KUIC15NLTS2 User Manual
Korg Computer Monitor DTR 1000 User Manual