JVC CRT Television 0803 NIC JMT User Manual

Contents  
2
3
3
3
4
5
5
6
Safety precautions  
Preparation  
..  
1 Confirm which remote control you have  
2 Insert the batteries into the remote control  
..  
COLOUR TELEVISION  
..................  
..........................  
......  
3 Connecting the aerial and VCR  
4 Connecting other devices  
INSTRUCTIONS  
5 Connect the power cord to the AC outlet  
..............................................  
6 SETUP TOUR  
Thank you for buying this JVC colour  
television.  
Basic operation  
Remote control buttons and functions  
MUTING button  
7
8
To make sure you understand how to  
use your new TV, please read this  
manual thoroughly before you begin.  
.............................................  
8
..................................................  
BASS button  
8
...........................  
.............................  
PICTURE BOOSTER button  
COLOUR SYSTEM button  
8
8
...............................  
SOUND SYSTEM button  
8
........................  
CINEMA SURROUND button  
9
.............................................  
AV-16N311  
AV-21V311  
AV-21V331  
AV-21W311  
AV-21Y311  
AV-25V311  
AV-25V331  
AV-29V311  
AV-29V331  
DISPLAY button  
9
.....................................  
ECO SENSOR button  
9
...............................  
PICTURE MODE button  
10  
10  
10  
11  
11  
.......................................  
........................................  
OFF TIMER button  
RETURN + button  
..............................  
CHANNEL SCAN button  
...................................  
FAVORITE CH button  
Using the TV’s menus  
Basic operation  
12  
............................................  
12  
13  
13  
13  
13  
14  
14  
14  
14  
15  
15  
15  
16  
17  
17  
17  
17  
18  
18  
19  
19  
19  
...........................................................  
INPUT  
...............................................  
PICTURE TILT  
...............................................................  
VNR  
........................................  
..........................................  
COMPRESS (16:9)  
AUTO SHUTOFF  
.................................................  
..................................................  
................................................  
CHILD LOCK  
BLUE BACK  
VIDEO-2 SET  
AUTO CH PRESET  
.......................................  
...............................................  
SETUP TOUR  
..................................................  
LANGUAGE  
..................................  
MANUAL CH PRESET  
..............................................................  
SKIP  
................................................  
SUPER BASS  
Picture Adjustments  
Sound Adjustments  
....................................  
.....................................  
..................................................  
AI VOLUME  
...............................  
FAVORITE CH SETTING  
...........................................  
..........................................  
..........................................  
VIDEO SETTING  
AI ECO SENSOR  
AI ECO DISPLAY  
Attaching the Twin Port Bass Blaster Unit 20  
TV buttons and parts  
Using the buttons on the TV  
Troubleshooting  
21  
22  
23  
24  
Specifications  
GGT0016-001A-E  
0803-NIC-JMT  
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
 
Preparation  
1 Confirm which remote control you have  
Your TV comes with one of the three remote controls shown below. Functions you  
can operate differ depending on the type of remote control.  
RM-C1306  
For TV model:  
AV-21V311  
AV-21W311  
AV-25V311  
RM-C1308  
For TV model:  
AV-21V331  
RM-C1313  
For TV model:  
AV-16N311  
AV-25V331  
AV-21Y311  
AV-29V331  
AV-29V311  
PICTURE  
POWER  
POWER  
POWER  
MUTING  
MUTING BASS  
SYSTEM  
MUTING  
SYSTEM  
BOOSTER  
SYSTEM  
CINEMA  
CINEMA  
COLOUR SOUND SURROUND  
COLOUR SOUND SURROUND  
COLOUR SOUND  
ECO  
ECO  
ECO  
SENSOR  
SENSOR  
SENSOR  
DISPLAY  
DISPLAY  
DISPLAY  
MENU  
MENU  
MENU  
TV/VIDEO  
TV/VIDEO  
TV/VIDEO  
1
4
2
5
8
0
3
6
9
1
4
2
5
8
0
3
6
9
1
4
2
5
8
0
3
6
9
OFF  
OFF  
OFF  
TIMER  
TIMER  
TIMER  
PICTURE  
MODE  
PICTURE  
MODE  
PICTURE  
MODE  
7
7
7
CHANNEL  
SCAN  
CHANNEL  
SCAN  
CHANNEL  
SCAN  
+
+
+
RETURN  
RETURN  
RETURN  
- --  
/
- --  
/
- --  
/
CHANNEL  
VOLUME  
CHANNEL  
VOLUME  
CHANNEL  
VOLUME  
RMT-CV1306  
RMT-CV1308  
RM-C1313  
TV  
2 Insert the batteries into the remote control  
Correctly insert two batteries, observing the and  
,
.
polarities and inserting the end first.  
.
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
• Use AA/R6/UM-3 dry cell batteries.  
• If the remote control does not work properly, fit new  
batteries.  
The supplied batteries are for testing, not regular use.  
3
 
Preparation  
3 Connecting the aerial and VCR  
• Read the manuals provided with the devices. Depending on the device, the connection  
method may be different from the diagrams. Also the device settings may need to change  
depending on the connection method.  
Turn off all the devices including the TV.  
• Connecting cables are not supplied.  
• When connecting monaural audio to the TV, use the L/MONO jack.  
• The AV-21Y311 and AV-16N311 are supplied with rod aerial but without matching aerial  
adapters.  
You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector  
with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C  
signal). In that case, do not connect it to the TV with a video cable.  
• If you connect the VCR to the TV only with an aerial cable, you should preset the video  
channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH  
PRESET” on page 16 and preset it manually.  
Connecting the aerial  
To install rod aerial:  
(1)  
Install into the top-rear aerial holder. Once installed, it cannot be removed.  
VHF/UHF outdoor aerial  
Indoor aerial  
Rod aerial  
Matching  
aerial  
(2)  
adapter  
(supplied)  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
S
(3)  
OVER  
V
Y
C
V
L
/V  
B
L
L
/MONO  
/ MONO  
R
C
R
R
R
• Illustration of AV-21Y311  
VHF/UHF outdoor aerial  
Connecting the aerial and VCR  
COMPONENT  
VIDEO-1  
INPUT  
(
)
VIDEO-2  
INPUT  
OUTPUT  
S
OVER  
V
Y
C
V
L
/V  
B
3
L
L
/MONO  
/ MONO  
R
C
R
R
R
2
To video  
output  
To audio  
output  
To RF  
output  
To S-video  
output  
1
VCR  
To aerial input  
4
 
Preparation  
4 Connecting other devices  
If you are not connecting any other devices, skip step 4 and perform step 5.  
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the  
headphones, the TV speakers go off.  
• The OUTPUT terminal outputs the video and sound signals which you are viewing on the  
TV. You can dub them onto the VCR connected to the OUTPUT terminal.  
(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it  
cannot output any signals when the TV is turned off.)  
• Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player,  
to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT. (See page 14.)  
• The following illustrations are for the AV-21V311/AV-21V331/AV-25V311/AV-25V331. Your  
TV’s front and rear panels may not look exactly like the illustrations.  
Front  
Camcorder or TV game  
Headphones  
Rear  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
VCR (for playing)  
S
DVD player  
(composite signals)  
OVER  
V
Y
V
L
/V  
V
L
C
B
L
/ MONO  
/ MONO  
VCR (for recording)  
R
C
R
R
R
R
DVD player  
(component video signals)  
5 Connect the power cord to the AC outlet  
Operate only from the power source indicated on the rear of the TV.  
5
 
Preparation  
6 SETUP TOUR  
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo  
is displayed. Follow the instructions on the on-screen display to perform the SETUP  
TOUR.  
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET  
function on the “MENU 3” menu. For details, see page 15.  
1 Press the Main power button  
on the TV.  
The POWER lamp lights. After the  
JVC logo has been displayed, the  
TV automatically switches to the  
language setting mode.  
POWER lamp  
Main power button  
SYSTEM  
CINEMA  
COLOUR SOUND SURROUND  
ECO  
SETUP TOUR  
SENSOR  
DISPLAY  
DISPLAY  
button  
MENU t  
buttons  
MENU  
MENU  
/
2 Press the CHANNEL –/+ or  
buttons  
/
the MENU  
buttons to  
TV/VIDEO  
select the on-screen  
language.  
1
4
7
2
5
8
0
3
6
9
OFF  
TIMER  
PICTURE  
MODE  
SETUP TOUR  
CHANNEL  
SCAN  
RETURN+  
LANGUAGE  
ENGLISH  
- --  
/
CHANNEL  
VOLUME  
NEXT  
CHANNEL –/+  
buttons  
EXIT BY  
DISPLAY  
OPERATE BY -+  
3 The AUTO PROGRAMMING  
function will start and the  
indicator blinks.  
• If a TV channel you want to view is  
not set to the channel, set it with the  
MANUAL CH PRESET function.  
For details, see page 16.  
SETUP TOUR  
NOW PROGRAMMING  
4 Upon the completion of  
AUTO PROGRAMMING  
function, the message below  
is displayed.  
STOP BY -+  
SETUP TOUR  
To stop the AUTO PROGRAMMING  
function, press the CHANNEL m or  
the MENU  
/
buttons.  
THANK YOU!  
When all the TV channels that can  
be received on your TV have been  
preset, the display goes out and  
the AUTO PROGRAMMING  
function operation is completed.  
6
 
Basic operation  
The illustration below is for the remote  
control RM-C1308. Your remote control  
may not look exactly like the  
illustration.  
1 Press the POWER button to  
turn your TV on.  
• If your TV does not turn on, press the  
Main power button on the TV, then  
press the POWER button again.  
You can also turn on your TV by  
pressing any of the following buttons;  
- the CHANNEL m button  
- the Number buttons  
POWER  
MUTING BASS  
SYSTEM  
CINEMA  
COLOUR SOUND SURROUND  
- the TV/VIDEO button  
ECO  
SENSOR  
DISPLAY  
2 Select a channel.  
Press the CHANNEL m button.  
MENU  
• Up/down selection cannot be selected  
for channels to which the SKIP has  
been set to “YES.  
See page 17.  
TV/VIDEO  
Press the Number buttons to enter  
1
4
2
5
8
0
3
6
9
OFF  
the channel number.  
TIMER  
• If you want to enter a two-digit  
number, press the -/-- button to select  
the two digit mode “--”, then enter the  
channel number.  
PICTURE  
MODE  
7
CHANNEL  
SCAN  
+
RETURN  
- --  
/
3 Press the VOLUME –/+ button  
to adjust the sound.  
CHANNEL  
VOLUME  
4 To turn your TV off, press the  
POWER button.  
We recommend that you press the Main  
power button on the TV to turn the  
main power off if you do not plan to use  
your TV for a long time or if you wish  
to save energy.  
RMT-CV1308  
If the picture is not clear:  
Press the COLOUR SYSTEM button  
to select another colour system,  
see page 8.  
If the sound is not clear:  
Press the SOUND SYSTEM button to  
select another sound system, see page 8.  
Viewing Images from an External  
Device:  
Press the TV/VIDEO button to select the  
VIDEO mode.  
You can also use the INPUT function to  
select the VIDEO mode. For details, refer to  
page 13.  
7
 
Remote control buttons and functions  
MUTING button  
COLOUR SYSTEM button  
You can turn the sound off instantly.  
If the picture is not clear or no colour  
appears, change the current colour  
system to another colour system.  
Press this button.  
To turn the sound on, press this button  
again.  
Press this button to select the colour  
system.  
SECAM  
NTSC3.58  
AUTO  
PAL  
BASS button  
NTSC4.43  
<
AV-21V331/AV-25V331/AV-29V331 only>  
AUTO:  
You can enjoy a powerful bass sound by  
using the BASS (Bass Reflex) function.  
Automatic colour system selection.  
• For the colour systems in each country or  
region, see the table “Broadcasting systems”  
on Back cover.  
Press this button to turn the BASS  
function on or off.  
To use this function, you must first mount  
the Twin Port Bass Blaster Unit packaged  
with the TV on top of the TV. For details,  
see page 20.  
• If the picture is not normal in the AUTO  
mode, change the AUTO mode to another  
colour system.  
SOUND SYSTEM button  
PICTURE BOOSTER button  
<AV-16N311/AV-21Y311 only>  
If the sound is not clear even when the  
picture appears normal, change the  
current sound system to another sound  
system.  
When the picture is unclear because the  
reception level of the TV signal is low,  
activating the Picture Booster improves  
the picture clarity in some situations.  
Repeatedly press the PICTURE BOOSTER  
button to select the desired mode.  
Press this button to select the sound  
system.  
B/G  
D/K  
M
HIGH:  
The Picture Booster is functioning at  
maximum.  
• For the sound systems in each country or  
region, see the table “Broadcasting  
systems” on Back cover.  
LOW:  
You cannot select any sound system when  
in a VIDEO mode.  
The Picture Booster is functioning at  
minimum.  
OFF:  
The Picture Booster is off.  
• If the picture becomes abnormal when you  
set the Picture Booster to HIGH, then set it  
to LOW or OFF.  
8
 
Remote control buttons and functions  
CINEMA SURROUND button  
ECO SENSOR button  
<AV-21V311/AV-21V331/AV-21W311/  
AV-25V311/AV-25V331/AV-29V311/  
AV-29V331 only>  
You can adjust this TV so that the screen  
automatically adjusts to the optimum  
contrast according to the brightness of  
your room. This function reduces eye  
strain and the power consumption of  
this TV.  
You can enjoy an enhanced sound for a  
wider audience by using CINEMA  
SURROUND function.  
Press this button to select the desired  
mode.  
Press this button to select one of the  
CINEMA SURROUND mode.  
AI ECO SENSOR 1:  
The AI ECO SENSOR function switches  
on.  
Usually, it is recommended to watch the  
TV in this mode.  
HIGH/LOW:  
When you listen to the stereo sound,  
please select HIGH mode or LOW mode.  
You can enjoy the sound for a wider  
audience similar to the experience at the  
theatre.  
• In case that you setting up the CINEMA  
SURROUND function to HIGH mode, there  
may be slight volume distortion. In case that  
occurs, please switch the HIGH mode to  
LOW mode, the effect of CINEMA  
AI ECO SENSOR 2:  
The AI ECO SENSOR function switches  
on.  
If you feel the screen in the AI ECO  
SENSOR 1” mode is too dark, select this  
mode.  
SURROUND functions will be less  
noticeable, however, the volume distortion  
will be corrected.  
AI ECO SENSOR OFF:  
The AI ECO SENSOR function switches  
off.  
You can display on the screen the effect of  
the AI ECO SENSOR function.  
For details, see AI ECO DISPLAY” on  
page 19.  
MONO SURROUND:  
Select the MONO SURROUND mode,  
when you listen to the mono sound.  
You can enjoy the sound for a wider  
audience similar to stereo sound.  
OFF:  
The CINEMA SURROUND function  
swiches off.  
DISPLAY button  
You can continuously display the current  
channel number or VIDEO mode on the  
screen.  
Press this button.  
To turn the display off, press this button  
again.  
• When selecting a VIDEO mode with no  
signal, indication of the VIDEO mode  
becomes fixed on the screen.  
9
 
Remote control buttons and functions  
PICTURE MODE button  
RETURN + button  
You can select one of three picture  
adjustment settings as you like.  
You can set a channel you frequently  
view to the Return Channel and you can  
view that channel at any time with one-  
touch.  
Press this button to select a mode.  
BRIGHT:  
Heightens contrast and sharpness.  
To set the channel to the Return  
Channel:  
1 Select the channel you want to set  
to the Return Channel.  
STANDARD:  
Standardizes picture adjustments.  
2 Press this button and hold until the  
message “RETURN PLUS  
SOFT:  
Softens contrast and sharpness.  
PROGRAMMED!” appears.  
• Pressing this button returns all the picture  
settings in “MENU 4” to their default  
settings.  
• When you turn off the TV, the Return  
Channel setting is canceled.  
To view the Return Channel:  
Press this button.  
OFF TIMER button  
You can set the TV to automatically turn  
off after a set time.  
You can view two channels (current channel  
and Return Channel) alternately by pressing  
this button.  
Press this button to select the period  
of time.  
You can set the period of time to a  
maximum of 120 minutes in 10 miniute  
increments.  
To cancel the Return Channel setting:  
Press this button and hold until the  
message “RETURN PLUS CANCELED!”  
appears.  
If no channel is set to the Return  
Channel:  
• 1 minute before the OFF TIMER function  
turns off the TV, GOOD NIGHT!” appears.  
To display the remaining time, press this  
button once.  
To cancel the OFF TIMER function,  
press this button to set the period of  
time to “0.  
You can view the channel selected right  
before the current channel by pressing  
this button.  
• The OFF TIMER function will not turn off  
the TV’s main power.  
10  
 
Remote control buttons and functions  
CHANNEL SCAN button  
You can quickly view all TV channels  
programmes that you can view on your  
TV, and search for the programme you  
want to view.  
1 Press this button to start scanning  
TV channels.  
The TV channel programmes are each  
displayed for several seconds.  
• The programmes of TV channels for  
which the SKIP function is set to “YES”  
are not displayed.  
2 When you find the programme you  
want to view, press this button  
again to stop scanning.  
FAVORITE CH button  
You can correlate 4 channels out of 99  
channels (PR01-PR99) with FAVORITE  
CH buttons RED, GREEN, YELLOW and  
BLUE.  
Press one of the FAVORITE CH buttons  
for more than 3 seconds to correlate  
currently watching channel. After the  
channel and button are correlated, you  
can directly select favorite channel by  
the correlated button.  
• When MENU is displayed, FAVORITE CH  
cannot be correlated.  
• Correlation of FAVORITE CH button and the  
channel cannot be reset eventhough the  
main power is turned off.  
11  
 
Using the TVs menus  
This TV has a number of functions you can operate using the menus. To use all your  
TV’s functions fully, you need to understand how to use the menus.  
3 Repeatedly press the  
MENU T buttons to select  
a desired function.  
SYSTEM  
CINEMA  
COLOUR SOUND SURROUND  
ECO  
SENSOR  
DISPLAY  
DISPLAY  
button  
4 Press the CHANNEL –/+ or the  
MENU t  
buttons  
MENU  
/
buttons to change  
MENU  
MENU  
/
function settings.  
buttons  
TV/VIDEO  
Example:  
1
4
7
2
5
8
0
3
6
9
OFF  
Changes the AUTO  
SHUTOFF setting.  
TIMER  
PICTURE  
MODE  
CHANNEL  
SCAN  
RETURN+  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
OFF  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
- --  
/
OFF  
OFF  
ON  
CHANNEL  
VOLUME  
VIDEO-2 SET COMPONENT  
VIDEO-2 SET COMPONENT  
CHANNEL –/+  
buttons  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
• With some functions, the operation  
method may differ.  
3 Basic operation  
5 Press the DISPLAY button to  
turn the display off.  
1 Press the MENU T buttons.  
One of the 6 menus is displayed.  
To operate a menu using the buttons on  
the front panel of the TV, refer to  
“Operating menus” on page 22.  
MENU number  
MENU  
1
The icon on  
the left indicates  
the currently  
INPUT  
VNR  
COMPRESS(16:9)  
PICTURE TILT  
TV  
ON  
ON  
00  
selected function.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Repeatedly press the  
MENU T buttons to display  
a desired menu.  
• If you hold down the y button, the next  
menu is displayed.  
• If the selected function is on the first  
line, pressing the r button displays the  
preceding menu.  
12  
 
Using the TVs menus  
INPUT  
VNR  
You can view images from VCRs or other  
devices connected to your TV.  
You can reduce picture noise.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“VNR”.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“INPUT”.  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
PICTURE TILT  
TV  
ON  
ON  
00  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
PICTURE TILT  
TV  
ON  
ON  
00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
2 Press CHANNEL –/+ or MENU  
/
to select “VIDEO-1”, “VIDEO-2” or  
“VIDEO-3”.  
To cancel the VNR function, select  
OFF.  
TV mode changes to VIDEO mode.  
COMPRESS (16:9)  
This function converts a normal picture  
(4:3 aspect ratio) into a wide picture  
(16:9 aspect ratio).  
Use for pictures with a 16:9 aspect ratio  
that have been squeezed into a normal  
picture (4:3 aspect ratio), to restore their  
original dimensions.  
PICTURE TILT  
<AV-29V311/AV-29V331 only>  
There are cases where the Earth’s  
magnetic force may make the picture tilt.  
If this happens, you can correct the  
picture tilt.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“PICTURE TILT”.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“COMPRESS (16:9)”.  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
PICTURE TILT  
TV  
ON  
ON  
00  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
PICTURE TILT  
TV  
ON  
ON  
00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Continue pressing CHANNEL –/+ or  
MENU until the picture  
becomes level.  
/
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
To cancel the COMPRESS (16:9)  
function, select “OFF.  
13  
 
Using the TVs menus  
AUTO SHUTOFF  
BLUE BACK  
You can set your TV to turn off if no  
signals are received for about 15 minutes  
or longer after the end of a broadcast.  
If no signal is being received or the signal  
is very weak, a blue screen automatically  
becomes the picture background.  
If you wish to continue viewing the poor  
picture, you must set the BLUE BACK  
function to “OFF.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“AUTO SHUTOFF”.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“BLUE BACK”.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
VIDEO-2 SET COMPONENT  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
VIDEO-2 SET COMPONENT  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To cancel the AUTO SHUTOFF  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
function, select “OFF.  
• The AUTO SHUTOFF function does not  
turn off the TV’s main power.  
• The AUTO SHUTOFF will not work for a  
VIDEO mode.  
To cancel the BLUE BACK function,  
select “OFF.  
VIDEO-2 SET  
CHILD LOCK  
You can disable the front control buttons  
of the TV.  
When this function is set to “ON”, the  
TV can be operated using only the  
remote control.  
Use this function to prevent children  
from operating the TV without parental  
consent.  
Set the VIDEO-2 SET correctly according  
to the video signal input from the external  
device connected to the VIDEO-2 terminal.  
If this setting is incorrect, images will not  
be displayed.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“VIDEO-2 SET”.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“CHILD LOCK”.  
VIDEO-2 SET COMPONENT  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
2 Set the VIDEO-2 SET according to  
the video signal input from the  
VIDEO-2 terminal.  
VIDEO-2 SET COMPONENT  
SELECT BY  
EXIT BY  
DISPLAY  
OPERATE BY -+  
If a normal video signal (composite  
video signal) is input:  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
Press the CHANNEL –/+ or the  
To cancel the CHILD LOCK function,  
select “OFF.  
• The CHILD LOCK function is canceled  
when you turn the power off.  
MENU  
/
buttons to select “VIDEO.  
If a component video signal  
(Y/CB/CR signals) is input:  
Press the CHANNEL –/+ or the  
MENU  
/
buttons to select  
COMPONENT.  
14  
 
Using the TVs menus  
AUTO CH PRESET  
SETUP TOUR  
You can automatically preset all TV  
channels that can be received by your  
TV to channels.  
You can start the SETUP TOUR function.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“SETUP TOUR”.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“AUTO CH PRESET”.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press CHANNEL M or MENU  
.
/
JVC logo appears and the SETUP  
TOUR function will start.  
For details, see page 6.  
2 Press CHANNEL –/+ or MENU  
to start the AUTO CH PRESET  
function.  
/
>>>ON SEARCH” is displayed on  
the screen.  
LANGUAGE  
You can select the language for the  
on-screen display.  
When all the TV channels that can be  
received on your TV have been preset,  
the display goes out and the AUTO  
CH PRESET function operation is  
completed.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“LANGUAGE”.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
To stop the AUTO CH PRESET:  
Press the CHANNEL –/+ or the  
MENU  
/
buttons.  
LANGUAGE  
ENGLISH  
• The AUTO CH PRESET function does not  
preset a TV channel to the AV channel  
(channel number 0).  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
• If the TV cannot preset the TV channel  
you want to view, preset it manually. For  
details, see “MANUAL CH PRESET” on  
page 16.  
2 Press CHANNEL –/+ or MENU  
to select language.  
/
The on-screen display indications are  
in the selected language.  
15  
 
Using the TVs menus  
If the picture is not clear:  
Fine-tune the TV channel.  
MANUAL CH PRESET  
You can manually preset desired TV  
channels to desired channels.  
1
Press MENU t to select “FINE”.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“MANUAL CH PRESET”.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
B/G  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
SELECT BY  
PROGRAM BY -+  
FINE  
PR 1 VL  
EXIT BY  
BY VOL-+ DISPLAY  
LANGUAGE  
ENGLISH  
2
Hold VOLUME m down to fine-tune  
the TV channel so that the best  
image is displayed on screen.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press CHANNEL –/+ or MENU  
/
.
“>” or “<” indicates that the TV is  
fine-tuning the TV channel.  
The sub-menu is displayed.  
MANUAL  
FINE  
If the sound is not clear:  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
1
Press MENU t to select  
“SOUND SYSTEM”.  
SELECT BY  
PROGRAM BY -+  
SEARCH BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
• The channel number is displayed as a PR  
number. For example, channel 1 will be  
displayed as PR 1. However, the AV  
channel will be displayed as AV.  
SELECT BY  
PROGRAM BY -+  
CHANGE BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
2
Press VOLUME m to select the  
appropriate sound system.  
3 Press CHANNEL –/+ or MENU  
to select the channel number.  
/
For the sound systems in each  
country or region, refer to the table  
“Broadcasting systems” on Back  
cover.  
4 Press VOLUME M to start  
searching for the TV channel.  
“>>>” or “<<<” is displayed on  
the screen.  
When the TV finds a TV channel, the  
“>>>” or “<<<” display goes out,  
and the TV channel is preset to the  
currently selected channel number.  
• If the TV channel you want to preset is  
not displayed, repeat step 4 until the TV  
finds the TV channel you want to preset.  
5 Press MENU T to select  
“MANUAL”.  
6 Repeat steps 3 to 5 if you want to  
preset another TV channel to a  
channel.  
To stop the MANUAL CH PRESET  
function, press any button other than the  
VOLUME m button.  
16  
 
Using the TVs menus  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
SKIP  
You can set undesired channels to be  
skipped. Channels set to be skipped  
cannot be selected by the CHANNEL m  
buttons or the CHANNEL SCAN button.  
To cancel the SUPER BASS function,  
select “OFF.  
• Channels to which TV channels have not  
been preset are automatically set to be  
skipped.  
Picture Adjustments  
You can adjust the picture as you like.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“MANUAL CH PRESET”.  
1 Press MENU T to display the  
“MENU 4” menu.  
MENU  
4
TINT  
2 Press CHANNEL –/+ or MENU  
/
.
COLOUR  
BRIGHT  
CONT  
The sub-menu is displayed.  
SHARP  
3 Press MENU T to select “SKIP”.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
2 Press MENU y to select an item  
NO  
B/G  
and press CHANNEL –/+ or  
MENU  
/
to adjust it.  
SELECT BY  
PROGRAM BY -+  
YES/NO BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
TINT*  
n : Reddish + : Greenish  
COLOUR  
BRIGHT  
CONT  
n : Lighter  
n : Darker  
n : Lower  
n : Softer  
+ : Deeper  
+ : Brighter  
+ : Higher  
+ : Sharper  
4 Press CHANNEL –/+ or MENU  
/
to select the channel you want to  
skip.  
SHARP  
5 Press VOLUME M to select “YES”.  
*TINT (tint) is displayed only when  
viewing images from NTSC3.58 or  
NTSC4.43 colour systems.  
The channel is set to be skipped.  
To cancel the SKIP function, select  
NO.  
6 Repeat steps 4 and 5 if you want to  
set another channel to skip.  
Sound Adjustments  
You can adjust the sound as you like.  
1 Press MENU T to display the  
SUPER BASS  
“MENU 5” menu.  
<
AV21V331/AV-25V331/AV-29V331 only>  
MENU  
5
BASS  
TREBLE  
BALANCE  
AI VOLUME  
SUPER BASS  
You can enjoy a powerful bass sound by  
using the SUPER BASS (Bass Reflex)  
function.  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
1 Press MENU T to display the  
“MENU 5” menu, then select  
“SUPER BASS”.  
2 Press MENU y to select an item  
and press CHANNEL –/+ or  
MENU  
5
MENU  
BASS  
/
to adjust it.  
n : Weaker  
n : Weaker  
n : Left  
BASS  
TREBLE  
BALANCE  
+ : Stronger  
+ : Stronger  
+ : Right  
AI VOLUME  
SUPER BASS  
ON  
ON  
TREBLE  
BALANCE  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
17  
 
Using the TVs menus  
AI VOLUME  
FAVORITE CH SETTING  
You can prevent the sudden increase or  
decrease of volume that occurs when  
changing channels or switching VIDEO  
modes.  
You can set PICTURE MODE, VNR and  
PICTURE EFFECT functions for the  
favorite channels using FAVORITE CH  
SETTING menu.  
1 Press MENU T to display the  
“MENU 6“ menu, then select  
“FAVORITE CH SETTING”.  
1 Press MENU T to display the  
“MENU 5” menu, then select  
“AI VOLUME”.  
MENU  
5
MENU  
6
BASS  
TREBLE  
BALANCE  
AI VOLUME  
SUPER BASS  
FAVORITE CH SETTING  
VIDEO SETTING  
AI ECO SENSOR  
AI ECO DISPLAY  
1
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
2 Press CHANNEL –/+ or MENU  
/
.
The sub-menu is displayed.  
To cancel the AI VOLUME function,  
select “OFF.  
• The AI VOLUME function may not  
operate as expected if the sound input  
level from a broadcast station (or video  
software) is extremely low.  
FAVORITE CHANNEL :  
PR xx  
PICTURE MODE : STANDARD  
VNR : ON  
PICTURE EFFECT : ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
• The AI VOLUME function for TV mode  
and VIDEO mode can be set separately.  
For example, you can set it to be off in  
TV mode and on in VIDEO mode. If you  
set the AI VOLUME function while  
viewing a TV channel, the setting is  
registered as the setting for TV mode. If  
you set the AI VOLUME function while  
viewing images from a VIDEO terminal,  
the setting is registered as the setting for  
VIDEO mode.  
3 Press CHANNEL –/+ or MENU  
to select one of the colours of  
/
“RED”, “GREEN”, “YELLOW” or  
“BLUE” assigned to FAVORITE CH  
button.  
4 Press MENU T to select  
“PICTURE MODE”, then press  
CHANNEL –/+ or MENU  
select the picture mode of  
“BRIGHT”, “STANDARD”  
or “SOFT”.  
/
to  
5 Press MENU T to select “VNR”,  
then press CHANNEL –/+ or  
MENU  
/
to select VNR “ON”  
or “OFF”.  
6 Press MENU T to select  
“PICTURE EFFECT”, then press  
CHANNEL –/+ or MENU  
/
to  
select PICTURE EFFECT “ON”  
or “OFF”.  
• PICTURE MODE and VNR settings are  
changed only when you press the  
FAVORITE CH button while PICTURE  
EFFECT is ON. Otherwise, PICTURE  
MODE and VNR are not changed.  
18  
 
Using the TVs menus  
VIDEO SETTING  
AI ECO SENSOR  
You can set PICTURE MODE, VNR and  
PICTURE EFFECT functions for VIDEO  
mode using VIDEO SETTING menu.  
You can enable this function so that the  
brightness of TV screen is automatically  
adjusted according to the brightness of  
your room.  
1 Press MENU T to display the  
“MENU 6” menu, then select  
“VIDEO SETTING”.  
1 Press MENU T to display the  
“MENU 6” menu, then select  
“AI ECO SENSOR”.  
MENU  
6
FAVORITE CH SETTING  
VIDEO SETTING  
AI ECO SENSOR  
AI ECO DISPLAY  
MENU  
6
FAVORITE CH SETTING  
VIDEO SETTING  
AI ECO SENSOR  
AI ECO DISPLAY  
1
ON  
1
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press CHANNEL –/+ or MENU  
/
/
.
2 Press CHANNEL –/+ or MENU  
to select “OFF”, “1” or “2”.  
/
The sub-menu is displayed.  
• For detailed description, see the  
“ECO SENSOR button” on page 9.  
VIDEO STATUS : VIDEO-1  
PICTURE MODE : STANDARD  
VNR : ON  
PICTURE EFFECT : ON  
RESET BY  
0
AI ECO DISPLAY  
You can display on the screen the effect  
of the AI ECO SENSOR function.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
3 Press CHANNEL –/+ or MENU  
to select “VIDEO-1”, “VIDEO-2”  
or “VIDEO-3”.  
1 Press MENU T to display the  
“MENU 6” menu, then select  
“AI ECO DISPLAY”.  
4 Press MENU T to select  
“PICTURE MODE”, then press  
MENU  
6
FAVORITE CH SETTING  
VIDEO SETTING  
AI ECO SENSOR  
AI ECO DISPLAY  
CHANNEL –/+ or MENU  
select the picture mode of  
“BRIGHT”, “STANDARD”  
or “SOFT”.  
/
to  
1
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
5 Press MENU T to select “VNR”,  
2 Press CHANNEL –/+ or MENU  
to select “ON”.  
/
then press CHANNEL –/+ or  
MENU  
/
to select VNR “ON”  
or “OFF”.  
The clover mark indicating the  
brightness of your room is displayed  
for several seconds each time the  
brightness changes. The number of  
clover marks displayed on screen  
increases as your room becomes  
darker.  
6 Press MENU T to select  
“PICTURE EFFECT”, then press  
CHANNEL –/+ or MENU  
/
to  
select PICTURE EFFECT “ON”  
or“OFF”.  
• PICTURE MODE and VNR settings are  
changed only when VIDEO input mode  
is selected while PICTURE EFFECT is  
ON. Otherwise, PICTURE MODE and  
VNR are not changed.  
To cancel the AI ECO DISPLAY  
function, select “OFF.  
• Press 0 button to reset the setting.  
19  
 
Attaching the Twin Port Bass  
Blaster Unit  
<AV-21V331/AV-25V331/AV-29V331 only>  
The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the  
TV, mount the Twin Port Bass Blaster unit correctly on the TV.  
Note:  
• The BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to  
the TV. For details on the BASS functions, see page 8.  
CAUTION:  
• The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a  
screw. When using the unit, pay attention to the following cautions. Otherwise, the unit or TV  
may fall over and be damaged, or cause unexpected injury.  
- Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.  
- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before  
you move the TV, be sure to remove the unit.  
- Do not move the TV by holding the Twin Port Bass Blaster Unit.  
1 Place the unit on top of the TV  
Twin Port Bass Blaster Unit  
making sure that the mounting  
pin on the bottom of the unit fits  
into the mounting hole on the top  
of the TV.  
• When you mount the unit, make sure  
that the mounting pin fits properly into  
the mounting hole. Otherwise, it may  
slide off the top of the TV. This may  
cause damage or cause unexpected  
injury.  
2 Firmly insert the Twin Port Bass  
Blaster Unit connector into the  
BASS SPEAKER OUT terminal.  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
S
OVER  
V
Y
C
V
L
/V  
B
BASS  
SPEAKER  
OUT  
L
L
/MONO  
/ MONO  
R
C
R
R
R
20  
 
TV buttons and parts  
<AV-29V311/AV-29V331>  
2
3
4
5
6
1
8
9
0
7
<AV-21Y311>  
1
2
3
4
5
7
9
0
8
-
<AV-21V311/AV-21V331/AV-25V311/AV-25V331>  
1
2
3
4
5
7
8
9
0
<AV-21W311>  
1
2
3
4
5
7
8
9
0
<AV-16N311>  
1
2
3
4
5
7
8
-
9
0
1 Headphone jack  
2 VIDEO-3 terminal  
3 MENU button  
9 POWER lamp  
0 Main power button  
- SUB POWER lamp  
4 CHANNEL m buttons  
5 VOLUME m buttons  
6 TV/VIDEO button  
7 ECO sensor  
<AV-16N311/AV-21Y311 only>  
When the main power is switched on,  
the POWER lamp turns red.  
When the TV is turned on (the sub power  
is on), the SUB POWER lamp turns green.  
8 Remote control sensor  
21  
 
Using the buttons on the TV  
Basic operation  
Operating menus  
Check to make sure the CHILD LOCK  
function is set to “OFF. When the  
CHILD LOCK function is set to “ON”,  
the TV cannot be operated using the  
front control buttons. For details, see  
“CHILD LOCK” on page 14.  
You can operate function in menus using  
the front control buttons on the TV.  
1 Press MENU y to display a menu.  
2 Press MENU y repeatedly to  
display the menu you want to use.  
1 Press CHANNEL –/+ to turn the TV  
on from standby mode.  
3 Press MENU y to select the desired  
function or item.  
2 Press CHANNEL –/+ to select a  
channel.  
4 Press CHANNEL –/+ or  
VOLUME –/+ to carry out the  
desired operation.  
3 Press VOLUME –/+ to adjust the  
volume.  
For details, see the description for  
each function.  
4 To turn your TV off, press the Main  
power button to turn off the TV’s  
main power.  
5 Press VOLUME –/+ to turn the  
menu display off.  
To change the TV mode to the VIDEO  
mode:  
To turn the sub-menu display off:  
• Press the TV/VIDEO button if the TV has  
one. See page 7.  
1
Press MENU y to select “EXIT”.  
MANUAL  
FINE  
• If the TV has no TV/VIDEO button, select  
the VIDEO mode with the INPUT function  
in “MENU 1.  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
M
SELECT BY  
PROGRAM BY -+  
EXIT  
PR 3 VL  
EXIT BY  
BY VOL-+ DISPLAY  
2
Press VOLUME –/+ to turn the display  
off.  
22  
 
Troubleshooting  
If there is no picture or the TV does not operate normally, make sure the problem isn’t  
due to the reasons indicated below.  
If the problem persists even after taking the measures indicated, please contact a  
service technician.  
Cannot turn the TV on  
Poor picture  
• Press the Main power button on the TV.  
• Connect the power cord to the AC outlet.  
• Press the COLOUR SYSTEM button to select  
another colour system. (see page 8).  
• Adjust the picture settings. (see page 17).  
• Is a component signal output device, such  
as a DVD player, connected correctly?  
(see page 5).  
The screen turns blue  
• Is the BLUE BACK function on?  
(see page 14).  
• Is the VIDEO-2 SET function setting correct?  
(see page 14).  
• If noise (snow) totally blocks out the  
picture, check the following.  
Remote control inoperable  
• Replace the batteries. (see page 3).  
- Have the TV and aerial been connected  
properly?  
- Has the aerial cable been damaged?  
- Is the aerial pointing in the right direction?  
- Is the aerial itself faulty?  
Buttons on front of the TV do not  
work  
• Switch the CHILD LOCK function off.  
(see page 14).  
• If the TV or aerial suffer interference from  
other equipment, stripes or noise may  
appear in the picture. Move any equipment  
which can cause interference away from the  
TV.  
TV does not respond immediately  
• Press the main power button on the TV to  
turn off the main power. Press the main  
power button again to turn on the TV. If the  
TV returns to a normal state, operation is  
normal.  
• If the TV or aerial suffer interference from  
signals reflecting from mountains or  
buildings, double-pictures (ghosting) will  
occur. Change the aerial’s direction or  
replace it with an aerial with better  
directionality.  
• When a white and bright still image (such  
as a white dress) is displayed on the screen,  
the white part may look as if it is coloured.  
When the image disappears from the screen,  
the unnatural colours will also disappear.  
The TV turns off suddenly  
• Is the OFF TIMER function set to operate?  
(see page 10).  
• Is the AUTO SHUTOFF function on?  
(see page 14).  
The picture is tilted  
Poor sound  
<AV-29V311/AV-29V331 only>  
• Press the SOUND SYSTEM button to select  
another sound system. (see page 8).  
• A picture may be tilted due to the influence  
of the earth’s magnetism. In this case, use  
the PICTURE TILT function to adjust the tilt.  
(see page 13).  
• Adjust the sound settings.  
(see page 17).  
23  
 
Specifications  
Model  
TV RF systems B/G, D/K, M  
Colour systems PAL, SECAM, NTSC3.58 / 4.43  
AV-16N311  
AV-21Y311  
AV-21W311  
Channel and  
frequencies  
VHF low channel (VL) = 46.25 to 168.25 MHz  
VHF high channel (VH) = 175.25 to 463.25 MHz  
UHF channel (U) = 471.25 to 863.25 MHz  
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11  
to S20) and hyper band (S21 to S41).  
Power input  
AC 110 to 240 V, 50 / 60 Hz (operating AC 90 to 260 V, 50 / 60 Hz)  
Power  
consumption  
Maximum 82 W  
Average 56 W  
Maximum 95 W  
Average 65 W  
Maximum 126 W  
Average 81 W  
Screen size  
(measured  
diagonally)  
Picture tube 423 mm  
Visible area 380 mm  
Picture tube 548 mm  
Picture tube 546.9 mm  
Visible area 508 mm Visible area 508 mm  
Audio output  
(Rated power  
output)  
5 W + 5 W  
5 W + 5 W  
7 W + 7 W  
Speakers  
(5 cm x 9 cm) x 2  
(6 cm x 12 cm) x 2  
(6.5 cm x 13 cm) x 2  
External input/ VIDEO-1: VIDEO input  
S-VIDEO input, VIDEO input, AUDIO L/R input  
output  
AUDIO L/R  
input  
VIDEO-2:  
VIDEO input, AUDIO L/R input,  
COMPONENT VIDEO (Y/ CB/ CR) input  
VIDEO input, AUDIO L/R input  
VIDEO output, AUDIO L/R output  
VIDEO-3:  
OUTPUT:  
Headphone jack: stereo mini jack (3.5 mm diameter)  
Dimension  
(W x H x D)  
(mm)  
518 x 391.5 x 403  
649 x 470.5 x 477.5  
649 x 465.5 x 471.5  
Weight  
13 kg  
21 kg  
24.6 kg  
Accessories  
• Remote control unit:  
RM-C1313 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
• Remote control unit: • Remote control unit:  
RM-C1313 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
RM-C1306 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
• Rod aerial x 1  
• Rod aerial x 1  
24  
 
Specifications  
Model  
TV RF systems B/G, D/K, M  
Colour systems PAL, SECAM, NTSC3.58 / 4.43  
AV-21V311  
AV-21V331  
AV-25V311  
Channel and  
frequencies  
VHF low channel (VL) = 46.25 to 168.25 MHz  
VHF high channel (VH) = 175.25 to 463.25 MHz  
UHF channel (U) = 471.25 to 863.25 MHz  
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11  
to S20) and hyper band (S21 to S41).  
Power input  
AC 110 to 240 V, 50 / 60 Hz (operating AC 90 to 260 V, 50 / 60 Hz)  
Power  
consumption  
Maximum 126 W  
Average 81 W  
Maximum 150 W  
Average 93 W  
Maximum 164 W  
Average 102 W  
Screen size  
(measured  
diagonally)  
Picture tube 546.9 mm  
Visible area 508 mm  
Picture tube 546.9 mm Picture tube 634 mm  
Visible area 508 mm  
Visible area 590 mm  
Audio output  
(Rated power  
output)  
7 W + 7 W  
7 W + 7 W + 13 W  
7 W + 7 W  
Speakers  
(6.5 cm x 13 cm) x 2  
(6.5 cm x 13 cm) x 2  
13 cm round x 1  
(6.5 cm x 13 cm) x 2  
External input/ VIDEO-1:  
S-VIDEO input, VIDEO input, AUDIO L/R input  
VIDEO input, AUDIO L/R input,  
output  
VIDEO-2:  
COMPONENT VIDEO (Y/ CB/ CR) input  
VIDEO input, AUDIO L/R input  
VIDEO-3:  
OUTPUT:  
VIDEO output, AUDIO L/R output  
Headphone jack: stereo mini jack (3.5 mm diameter)  
Dimension  
(W x H x D)  
(mm)  
649 x 465.5 x 473.5  
649 x 478 x 473.5  
728 x 536 x 481.5  
Weight  
24.5 kg  
26.9 kg  
32.5 kg  
Accessories  
• Remote control unit:  
RM-C1306 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
• Remote control unit: • Remote control unit:  
RM-C1308 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
RM-C1306 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
25  
 
Specifications  
Model  
AV-25V331  
AV-29V311  
AV-29V331  
TV RF systems B/G, D/K, M  
Colour systems PAL, SECAM, NTSC3.58 / 4.43  
Channel and  
frequencies  
VHF low channel (VL) = 46.25 to 168.25 MHz  
VHF high channel (VH) = 175.25 to 463.25 MHz  
UHF channel (U) = 471.25 to 863.25 MHz  
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11  
to S20) and hyper band (S21 to S41).  
Power input  
AC 110 to 240 V, 50 / 60 Hz (operating AC 90 to 260 V, 50 / 60 Hz)  
Power  
consumption  
Maximum 184 W  
Average 112 W  
Maximum 190 W  
Average 145 W  
Maximum 212 W  
Average 145 W  
Screen size  
(measured  
diagonally)  
Picture tube 649 mm  
Visible area 597 mm  
Picture tube 728 mm  
Visible area 676 mm  
Picture tube 728 mm  
Visible area 676 mm  
Audio output  
(Rated power  
output)  
7 W + 7 W + 13 W  
10 W + 10 W  
7 W + 7 W + 13 W  
Speakers  
(6.5 cm x 13 cm) x 2  
13 cm round x 1  
(6.5 cm x 13 cm) x 2  
(6.5 cm x 13 cm) x 2  
13 cm round x 1  
External input/ VIDEO-1:  
output VIDEO-2:  
S-VIDEO input, VIDEO input, AUDIO L/R input  
VIDEO input, AUDIO L/R input,  
COMPONENT VIDEO (Y/ CB/ C ) input  
VIDEO-3:  
OUTPUT:  
VIDEO input, AUDIO L/R inputR  
VIDEO output, AUDIO L/R output  
Headphone jack: stereo mini jack (3.5 mm diameter)  
Dimension  
(W x H x D)  
(mm)  
728 x 549 x 481.5  
812 x 584.2 x 520.5  
812 x 584.2 x 520.5  
Weight  
34.9 kg  
43.5 kg  
45.9 kg  
Accessories  
• Remote control unit:  
RM-C1308 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
• Remote control unit: • Remote control unit:  
RM-C1306 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
RM-C1308 x 1  
• AA / R6 /UM - 3  
dry cell battery x 2  
• Matching aerial  
adapter x 1  
 

Interfire Audio Car Amplifier T 1000M User Manual
Iqua Bluetooth Headset BHS 702 User Manual
JBL Stereo Equalizer SDEC 4000 User Manual
Jura Capresso Coffeemaker Impressa F9 User Manual
JVC DVD Recorder DR MH20SUJ User Manual
JVC Portable CD Player RD T50RLB User Manual
JVC Speaker System CA UXN1S User Manual
JVC VCR HR DD445EK User Manual
KitchenAid Ventilation Hood RANGE HOOD LINER with INTERNAL BLOWER User Manual
Knoll Stereo Amplifier MA215E User Manual