JVC CRT Television 0803 KG II IM User Manual

Color Television Users Guide  
For Models:  
AV-27F734  
AV-32F734  
Illustration of AV-32F734 and RM-C1251G  
Important Note:  
In the spaces below, enter the model and serial number of your television (located at the  
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this  
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and  
original packaging for future use.  
Model Number:  
LCT1506-001A-A  
0803-KG-II-IM  
Serial Number:  
 
• As an “ENERGY STAR®” partner, JVC has determined  
that this product or product model meets the “ENERGY  
STAR®” guidelines for energy efficiency.  
Important Safeguards  
CAUTION:  
Please read and retain for your safety.  
Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to  
assure your personal safety. But improper use can result in potential electrical shock or fire hazards.  
In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its  
installation, use and servicing. Also follow all warnings and instructions marked on your TV set.  
INSTALLATION  
1 Your TV set is equipped with a polarized AC line plug (one blade of the  
plug is wider than the other). This safety feature allows the plug to fit  
into the power outlet only one way. Should you be unable to insert the  
plug fully into the outlet, try reversing the plug. Should it still fail to fit,  
contact your electrician.  
(POLARIZED-TYPE)  
2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating  
instructions for this information. If you are not sure of the type of power supply to your home, consult your  
TV set dealer or local power company. For battery operation, refer to the operating instructions.  
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken  
plugs. They may result in a shock or fire hazard. Call your service technician for replacement.  
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord  
is subject to traffic or abuse. This may result in a shock or fire hazard.  
5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a  
wet basement, or near swimming pool, etc.  
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide  
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical  
Code provides information with respect to proper grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge  
unit, connection requirements for the grounding electrode.  
 
ANTENNA  
LEAD IN  
WIRE  
7 An outside antenna system  
should not be located in the  
vicinity of overhead power  
lines or other electric light  
or power circuits, or where it  
can fall into such power lines  
or circuits. When installing  
an outside antenna system,  
extreme care should be taken  
to keep from touching such  
power lines or circuits as  
contact with them might be  
fatal.  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRICAL  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ARTICLE 250, PART H)  
NEC - NATIONAL ELECTRIC CODE  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE  
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be  
released.  
Therefore:  
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.  
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.  
— Never cover the openings with a cloth or other material.  
— Never place the TV set near or over a radiator or heat register.  
9 To avoid personal injury:  
— Do not place a TV set on a sloping shelf unless properly secured.  
— Use only a cart or stand recommended by the TV set manufacturer.  
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.  
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit  
approved by the manufacturer.  
Use  
10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some  
internal parts carry hazardous voltages and contact can result in a fire or electrical shock.  
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.  
12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result  
in a hazard.  
 
PORTABLE CART WARNING (Symbol provided by RETAC)  
13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for  
an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent  
damage to product due to lightning storms or power line surges.  
14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven  
surfaces may cause the TV set and cart combination to overturn.  
Service  
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the  
following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the TV set.  
C. If the TV set has been exposed to rain or water.  
D. If the TV set does not operate normally by following the operating instructions. Adjust only those  
controls that are covered in the operating instructions as improper adjustment of other controls may  
result in damage and will often require extensive work by a qualified technician to restore the TV set to  
normal operation.  
E. If the TV set has been dropped or damaged in any way.  
F. When the TV set exhibits a distinct change in performance — this indicates a need for service.  
16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
17 When replacement parts are required, have the service technician verify in writing that the replacement  
parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified  
replacement parts can prevent fire, shock, or other hazards.  
18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the  
safety check described in the manufacturer’s service literature.  
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube  
implosion. Ask a qualified service technician to dispose of the TV set.  
20 Note to CATV system installer.  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC  
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as close to the point of cable entry as practical.  
 
Table of Contents  
Quick Setup . . . . . . . . . . . 7  
Button Functions . . . . . . . 40  
Unpacking your TV . . . . . . . . . . . . 7  
TV Models . . . . . . . . . . . . . . . . 8  
TV Remote Control . . . . . . . . . . . 9  
Getting Started . . . . . . . . . . . . . 10  
The Remote Control . . . . . . . . . . 10  
Connecting Your Devices . . . . . . . 11  
Interactive Plug In Menu . . . . . . . . 16  
Power . . . . . . . . . . . . . . . . . . 40  
Number Buttons . . . . . . . . . . . . . 40  
100+ Button . . . . . . . . . . . . . . . 40  
Channel +/– . . . . . . . . . . . . . . . 40  
Volume +/– . . . . . . . . . . . . . . . 40  
Muting . . . . . . . . . . . . . . . . . . 40  
Menu . . . . . . . . . . . . . . . . . . 40  
Exit . . . . . . . . . . . . . . . . . . . 40  
Return + . . . . . . . . . . . . . . . . . 41  
Input . . . . . . . . . . . . . . . . . . . 41  
Display . . . . . . . . . . . . . . . . . 42  
Sleep Timer . . . . . . . . . . . . . . . 42  
Sound . . . . . . . . . . . . . . . . . . 43  
C.C. . . . . . . . . . . . . . . . . . . . 43  
Video Status . . . . . . . . . . . . . . . 44  
TheaterPro D6500K . . . . . . . . . . . 44  
Aspect . . . . . . . . . . . . . . . . 44  
Light . . . . . . . . . . . . . . . . . . . 44  
TV/CATV Slide Switch . . . . . . . . . . 45  
VCR/DVD Slide Switch . . . . . . . . . 45  
VCR Buttons . . . . . . . . . . . . . . . 45  
DVD Buttons . . . . . . . . . . . . . . . 45  
Remote Programming . . . . . 19  
Setting CATV, VCR and DVD Codes . . . 19  
CATV or Satellite Codes . . . . . . . . 19  
VCR Codes . . . . . . . . . . . . . . 20  
DVD Codes . . . . . . . . . . . . . . 21  
Search Codes . . . . . . . . . . . . . 22  
Onscreen Menus . . . . . . . . 23  
Using the Guide . . . . . . . . . . . . . 23  
Onscreen Menu System . . . . . . . . . 24  
Initial Setup . . . . . . . . . . 25  
Auto Tuner Setup . . . . . . . . . . . . 25  
Channel Summary . . . . . . . . . . . . 25  
V-Chip . . . . . . . . . . . . . . . . . . 26  
Set Lock Code . . . . . . . . . . . . . 32  
Language . . . . . . . . . . . . . . . . 33  
Closed Caption . . . . . . . . . . . . . 33  
Front Panel Lock . . . . . . . . . . . . 34  
Auto Shut Off . . . . . . . . . . . . . . 34  
XDS ID . . . . . . . . . . . . . . . . . 34  
Appendices . . . . . . . . . . 46  
Troubleshooting . . . . . . . . . . . . . 46  
Warranty . . . . . . . . . . . . . . . . . 47  
Authorized Service Centers . . . . . . . 49  
Specifications . . . . . . . . . . . . . . 50  
Notes . . . . . . . . . . . . . . . . . 51  
Picture Adjust . . . . . . . . . 35  
Picture Settings . . . . . . . . . . . . . 35  
Adjust Picture Settings . . . . . . . . . 35  
Color Temperature . . . . . . . . . . . . 36  
Noise Muting . . . . . . . . . . . . . . 36  
VSM . . . . . . . . . . . . . . . . . 36  
Sound Adjust . . . . . . . . . 37  
Sound Settings . . . . . . . . . . . . . 37  
Adjust Sound Settings . . . . . . . . . 37  
MTS (Multi-channel Sound) . . . . . . . 37  
Clock Timers . . . . . . . . . . 38  
Set Clock . . . . . . . . . . . . . . . . 38  
On/Off Timer . . . . . . . . . . . . . . . 39  
 
Quick Setup  
Unpacking Your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items. In addition to this  
guide, your television box should include:  
Two AA  
Batteries  
1 Remote Control  
1 Television  
TV CATV VCR DVD  
POWER  
TM  
INPUT  
DISPLAY  
1
2
3
6
SLEEP TIMER  
4
5
SOUND  
7
8
0
9
RETURN+  
VIDEO STATUS 100+  
THEATER PRO ASPECT  
LIGHT  
C.C.  
MUTING  
CH  
CH  
+
VOL  
VOL  
+
Note: Your television  
and/or remote  
control may differ  
from the examples  
illustrated here.  
MENU  
EXIT  
VCR CHANNEL VCR/DVD  
TV/VCR  
PREV NEXT  
POWER  
REW  
REC  
PLAY  
STOP  
FF  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1251G  
TV  
Once you have unpacked your television, the next step is to connect it to your antenna/  
cable or satellite system and to connect the audio/video devices you want to use with your  
television. To make these connections you will use plugs like the ones illustrated below.  
Component Cables  
Composite Cables  
Audio Cables  
Coaxial Cables  
Used to connect an external  
antenna or cable TV system to your  
TV.  
Used to connect audio/video  
devices like VCRs, DVD players,  
stereo amplifiers, game consoles,  
etc.  
S-Video Cable  
AV CompuLink Cable  
Used to make video connections  
with S-Video VCRs, Camcorders  
and DVD players.  
Used to connect JVC AV  
CompuLink capable components  
for an automated home theater.  
We recommend that before you start using your new television, you read your entire User’s  
Guide so you can learn about your new television’s many great features. If you’re anxious to  
start using your television right away, a quick setup guide follows on the next few pages.  
7
 
Quick Setup  
TV Models  
NOTE: Before you connect your television to another device, please refer to the proper  
diagrams for your specific TV and remote. These will help assist you in understanding  
how to connect your television to another device, as well as use the remote to set up  
your television.  
Rear Panel Diagrams  
MODELS:  
AV-27F734  
AV-32F734  
AUDIO  
L MONO  
VIDEO  
S
VIDEO  
R
OVER  
INPUT  
INPUT  
1
2
COMPONENT  
VIDEO  
75Ω  
(VHF / UHF)  
Y
R
L
PB  
PR  
AUDIO OUT  
AV COMPULINK  
Front Panel Diagrams  
INPUT  
3
VOLUME  
CHANNEL  
MENU  
OPERATE  
VIDEO  
L
MONO  
AUDIO  
R
MODELS: AV-27F734 and AV-32F734  
8
 
Quick Setup  
TV Remote Control  
POWER  
TV CATV VCR DVD  
INPUT  
DISPLAY  
1
2
5
3
6
SLEEP TIMER  
4
SOUND  
7
8
0
9
RETURN+  
100+  
VIDEO STATUS  
THEATER PRO  
ASPECT  
LIGHT  
C.C.  
MUTING  
CH +  
VOL  
+
VOL  
CH –  
MENU  
EXIT  
VCR/DVD  
POWER  
VCR CHANNEL  
PREV NEXT  
TV/VCR  
REW  
REC  
PLAY  
STOP  
FF  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1251G  
TV  
RM-C1251G  
MODELS:  
AV-27F734  
AV-32F734  
• For information on remote control buttons, see pages 40 - 45.  
9
 
Quick Setup  
Getting Started  
Getting Started  
These quick setup pages will provide you, in three easy steps, with the basic information you  
need to begin using your new television right away.  
If you have questions, or for more detailed information on any of these steps, please consult  
other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you first need to install the batteries (included).  
Lift and pull the latch on the back of the  
remote control to open. Insert two batteries  
(included) carefully noting the “+” and “–”  
markings, placing the “–” end in the unit first.  
Snap the cover back into place.  
When you change the batteries, try to  
complete the task within three minutes.  
If you take longer than three minutes,  
the remote control codes for your VCR,  
DVD, and/or cable box/satellite receiver  
may have to be reset. See pages 19 - 21.  
Key Feature Buttons  
The four key feature buttons at the center of the remote  
can be used for basic operation of the television.  
The top and bottom buttons will scan forward and  
back through the available channels. To move rapidly  
through the channels using JVC’s Hyperscan feature,  
press and hold CH+ or CH–. The channels will zip by  
at a rate of five channels per second. The right and left  
buttons will turn the volume up or down. These buttons  
are also marked with four arrows and are used with  
JVC’s onscreen menu system. To use the onscreen  
menus, press the MENU button.  
MUTING  
C.C.  
CH +  
VOL  
+
VOL  
CH –  
MENU  
EXIT  
10  
 
Quick Setup  
Connections  
Basic Operation  
Turn the television on and off by pressing the POWER button at the top right  
corner of the remote. If this is the first time you are turning on the TV, the  
interactive plug-in menu appears.  
POWER  
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
TV CATV  
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 19 to 21 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
VCR DVD  
Step 2 – Connecting Your Devices  
Please follow the flow chart below to determine which connection setup is right for you. Then,  
refer to the appropriate diagrams to connect your television to other devices that you may  
have. After you are finished connecting your devices, plug the power cord into the nearest  
power outlet and turn on the TV.  
A VCR is not necessary for operation of the television. If you follow these diagrams and the  
television does not work properly, contact your local cable operator.  
To connect a DVD player, see Diagram #3. A DVD player is optional.  
• If you have a satellite television system, please refer to the satellite TV manual.  
Do you use a Cable TV Box?  
Yes  
No  
Do you have a VCR?  
Do you have a VCR?  
Yes  
No  
Yes  
No  
Diagram #2 Diagram #1  
Diagram #3 Diagram #1  
11  
 
Quick Setup  
Connections  
Diagram #1  
Illustration of AV-32F734  
TV Rear Panel  
Cable or Antenna  
Output  
AUDIO  
L MONO  
VIDEO  
S
VIDEO  
R
OVER  
INPUT  
INPUT  
1
2
COMPONENT  
VIDEO  
Coaxial Cable  
75Ω  
(VHF UHF)  
/
Y
R
L
OR  
PB  
PR  
AUDIO OUT  
AV COMPULINK  
OUT IN  
Cable Box  
Note:  
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of  
the TV.  
Diagram #2  
Illustration of AV-32F734  
Cable or Antenna  
Output  
TV Rear Panel  
AUDIO  
L MONO  
VIDEO  
S
VIDEO  
R
OVER  
INPUT  
INPUT  
1
2
COMPONENT  
VIDEO  
75Ω  
(VHF UHF)  
/
Y
R
L
PB  
PR  
AUDIO OUT  
AV COMPULINK  
Coaxial Cable  
OR  
VCR  
OUT  
IN  
OUT  
R
L
V
IN  
OUT  
IN  
Cable Box  
Notes:  
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s  
LEFT AUDIO INPUT.  
• Use the S-Video connection if possible for superior picture quality.  
Your VCR must be turned on to view premium cable channels.  
12  
 
Quick Setup  
Connections  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
• If you use INPUT 2 (Component-In), for a DVD connection, you must select  
"V2-COMPONENT" by pressing the INPUT button, for proper display of the DVD signal.  
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with  
this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.  
Diagram #3  
Illustration of AV-32F734  
Cable or Antenna  
Output  
VCR  
R
L
V
IN  
IN  
DVD Player (OPTIONAL)  
OUT  
Coaxial Cable  
OUT  
Green  
Blue  
Red  
Y
P
P
AUDIO OUT  
L
R
B
R
OR  
TV Rear Panel  
OU
UDIO  
V
S
O  
L NO  
OVER  
INPUT  
INPUT  
1
2
COMPONENT  
VIDEO  
75Ω  
(VHF UHF)  
/
Y
R
L
PB  
PR  
AUDIO OUT  
AV COMPULINK  
13  
 
Quick Setup  
Connections  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the front input jacks (Input 3) located under the front panel door. To access, pull on the door  
to open it. You can also connect these using the television’s rear input jacks, using the same  
instructions.  
Illustration of AV-32F734  
INPUT  
3
CHANNEL  
OPERATE  
VOLUME  
MENU  
VIDE
MO
AU
Camcorder  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the TV.  
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the  
LEFT AUDIO IN on the front of the TV.  
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the  
RIGHT AUDIO IN on the front of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
LEFT AUDIO IN.  
Connecting to an External Amplifier  
Illustration of AV-32F734  
Speaker  
Speaker  
R
L
Amplifier  
TV Rear Panel  
AUDIO OUT  
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to  
the LEFT AUDIO INPUT on the amplifier.  
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to  
the RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
14  
 
Quick Setup  
Connections  
Connecting to JVC AV Compu Link  
JVC’s AV compu link feature makes playing video tapes or DVDs totally automatic. Simply  
insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player  
and the device will automatically turn on and begin playback. At the same time, using the  
AV compu link, the VCR or DVD player sends a signal to the television telling it to turn on  
and switch to the proper video input.  
• The AV compu link cable may be included with the JVC AV compu link unit you  
wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or  
• AV Compu Link can only be used with JVC brand products.  
To Connect: Plug one end of the AV compu link cable  
AV Compu Link Cable  
into the AV COMPU LINK INPUT on your VCR, DVD, or  
other compu link device. Plug the other end of the AV  
compu link cable into the AV COMPU LINK at the rear  
of the television.  
Note:  
• The AV compu link cable has a male 3.5 mm (mono)  
plug on each end.  
TV Rear Panel  
VCR  
IN  
V
L
R
AV COMPULINK  
IN  
OUT  
OUT  
AV CompuLink  
Illustration of AV-32F734  
Notes:  
• In order for the VCR playback to begin automatically, the recording tabs must be removed  
from the VHS tape. If the tab is in place, automatic switching will occur when you push the  
VCR’s PLAY button.  
• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s  
instruction book), using VCR A code will switch the TV to input 1.  
• Refer to your DVD instruction book for detailed connection information.  
To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see  
the receiver connection instructions for detailed connection information.  
• AV compu link is compatible with select AV compu link receivers.  
• If you use component connection for your DVD player and the AV Compulink function, you  
must set the AV Compulink setting of the DVD to "DVD1".  
15  
 
Quick Setup  
Plug-In Menu  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “AUTO” or “MANUAL” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Language  
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: English, French (Français) or Spanish (Español).  
®  
To choose a language:  
(English, Français or Español)  
I N T E R A C T I V E P L U G I N M E N U  
L A N G U A G E / L A N G U E / I D I O M A  
>
To NEXT (To set clock)  
E N G L I S H  
N E X T  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
(To be continued...)  
16  
 
Quick Setup  
Plug-In Menu  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely  
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you  
do not have this in your area, you will have to set the clock manually. See manual clock set  
below. To set the clock using the XDS signal:  
®  
To choose AUTO  
To TIME ZONE  
I N T E R A C T I V E P L U G I N M E N U  
S E T C L O C K  
>
M O D E  
A U T O  
®  
To select your time zone:  
(Atlantic, Eastern, Central, Mountain, Pacific,  
Alaska or Hawaii)  
T I M E Z O N E  
D . S . T .  
P A C I F I C  
O F F  
N E X T  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
®  
To NEXT (To Auto Tuner Setup)  
Notes:  
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.  
The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will  
move back one hour at 2:00 am on the last Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
®  
To choose MANUAL  
To TIME  
I N T E R A C T I V E P L U G I N M E N U  
S E T C L O C K  
>
M O D E  
T I M E  
M A N U A L  
®  
To set the hour  
To minute  
– – : – – – –  
®  
To set the minute  
To START CLOCK  
S T A R T C L O C K  
B Y  
S E L E C T  
E X I T  
E X I T B Y  
O P E R A T E B Y  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
17  
 
Quick Setup  
Plug-In Menu  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
®  
To choose CABLE or AIR (or SKIP when you  
skip Auto Tuner Setup)  
I N T E R A C T I V E P L U G I N M E N U  
A U T O T U N E R S E T U P  
>
To START  
T U N E R M O D E  
C A B L E  
NOW  
S T A R T  
S E L E C T  
B Y  
PROGRAMMING !  
E X I T  
O P E R A T E B Y  
E X I T B Y  
48  
Programming will take  
approximately 1 to 2  
minutes.  
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• Noise muting will not work during Auto Tuner Setup.  
• Skip appears only for interactive plug-in menu.  
• The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case, use the initial setup menu to perform these settings. See pages 33, 38 and 25.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
The Quick Setup is complete  
STOP  
18  
 
Remote Programming  
Setting the CATV, VCR and DVD Codes  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond to  
any of the codes listed below or to the code search function, use the remote control supplied  
by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to “CATV”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
• If your cable or satellite box does not respond to the first code, try the others listed. If it does  
not respond to any code, try the search codes function, on page 22.  
Cable Box  
ABC  
CODES  
024  
Cable Box  
Puser  
CODES  
032  
Digital  
Satellite  
Systems  
CODES  
Archer  
032, 025  
051, 032  
022, 051  
058, 059  
024, 032, 025  
029  
RCA  
061, 070  
032  
Echostar  
100, 113, 114,  
115  
Cableview  
Citizen  
Realistic  
Regal  
058, 064, 040,  
041, 042, 045,  
068  
Express VU  
G.E.  
100, 113  
Curtis  
106  
Diamond  
Eagle  
Regency  
034  
G.I.  
108  
Rembrandt  
037, 032, 051,  
038  
Gradiente  
Hitachi  
112  
Eastern  
GC Brand  
Gemini  
034  
032, 051  
022, 043  
104, 111  
Samsung  
051  
HNS (Hughes)  
Scientific Atlanta 057, 058, 059  
104  
General Instrument 065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
SLMark  
051, 047  
051, 056  
032, 051  
Panasonic  
Philips  
105  
Sprucer  
Stargate  
102, 103  
023  
Primestar  
108  
Hamlin  
040, 041, 042,  
045, 058, 064  
049, 024  
Telecaption  
Teleview  
Texscan  
Tocom  
067  
Proscan  
RCA  
106, 109, 110  
106, 109, 110  
Hitachi  
Jerrold  
047, 051  
044  
065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
023  
Sony  
107  
035, 036, 066  
050  
Star Choice  
104, 108  
Toshiba  
Unika  
Toshiba  
Uniden  
101  
Macom  
049, 050, 051,  
054  
102, 103  
032, 025  
Universal  
Videoway  
Viewstar  
Zenith  
022, 032  
052  
Magnavox  
033  
030  
Memorex  
Movietime  
029, 030  
063, 046  
046  
032, 051  
039, 037, 048  
Oak  
Panasonic  
055, 056, 060,  
071, 073  
Zenith/Drake  
Satellite  
Paragon  
Philips  
063  
028, 029, 030,  
052, 053, 031,  
069  
Pioneer  
Pulsar  
047, 062  
051, 032  
19  
 
Remote Programming  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
• If your VCR does not respond to the first code, try the others listed. If it does not respond to  
any of the codes, try the search codes function on page 22.  
• After you program your remote, some VCR buttons may not work properly. If so, use the  
VCR’s remote.  
To record, hold down the REC button on the remote and press PLAY.  
VCRs  
CODES  
035  
027, 032, 095  
VCRs  
CODES  
VCRs  
CODES  
Admiral  
Aiwa  
Marantz  
Marta  
003, 004, 005  
064  
Samsung  
037, 060, 062,  
033, 089  
Samtron  
Sansui  
089  
Akai  
029, 072, 073, Memorex  
074  
024, 067  
003, 026, 020,  
052  
038, 040, 047,  
048, 041, 042  
MGA  
Audio Dynamic 003, 005  
Sanyo  
Scott  
063, 067, 091,  
071  
Bell & Howell  
Broksonic  
Canon  
063, 071  
020, 026, 094  
023, 025  
043  
Minolta  
058, 045, 093  
Mitsubishi  
038, 040, 047,  
048, 041, 042,  
078, 090  
059, 060, 062,  
067, 038, 040,  
047, 048, 026,  
020  
CCE  
Multitech  
NEC  
047, 027, 062  
Citizen  
064  
003, 004, 005,  
000  
Sears  
063, 064, 065,  
066, 058, 000,  
001  
Craig  
063, 029, 064  
Curtis Mathes  
045, 024, 027,  
093  
Olympic  
024, 023  
Shintom  
Sharp  
075  
Optimus  
028, 021, 035,  
064  
Daewoo  
043, 059, 024,  
092  
035, 036, 080,  
088  
026, 020  
Orion  
DBX  
003, 004, 005  
Panasonic  
023, 024, 021,  
022  
Signature 2000 027, 035  
Dimensia  
Emerson  
045, 093  
Singer  
Sony  
075  
043, 026, 077,  
061, 025, 042,  
020, 076  
Penney  
024, 058, 045,  
063, 003, 004,  
005, 093  
028, 029, 030,  
053, 054, 055  
SV 2000  
Sylvania  
027  
Fisher  
Funai  
063, 066, 067,  
065, 071, 091  
Pentax  
Philco  
058, 005, 045,  
093  
031, 023, 024,  
027  
027, 026, 020,  
000  
031, 024, 027,  
023, 026, 020,  
043  
Symphonic  
Tashiro  
Tatung  
027, 081  
064  
033, 045, 024  
G.E.  
Philips  
031, 023, 024,  
086  
003, 004, 005  
Go Video  
037, 051, 049,  
050, 089  
Teac  
003, 004, 027,  
005  
Pioneer  
Proscan  
023  
Goldstar  
064  
045, 058, 023,  
024, 031, 046,  
059, 060, 033,  
087, 093  
Technics  
021, 022, 023,  
024  
Gradiente  
083, 084, 081,  
000, 001  
Teknika  
Toshiba  
024, 027, 070  
059, 046, 079  
Hitachi  
023, 045, 058,  
027, 081, 093  
Quasar  
021, 022, 023,  
024  
Vector Research 005  
Instant Replay 024, 023  
Wards  
Yamaha  
Zenith  
035, 036, 067,  
044, 064  
Radio Shack  
033, 024, 063,  
036, 067, 040,  
027  
Jensen  
JVC  
003  
000, 001, 002,  
003, 004, 005  
063, 003, 004,  
005  
033, 045, 058,  
023, 024, 031,  
046, 059, 060,  
083, 084, 085,  
087, 093  
RCA  
Kenwood  
LXI  
003, 004, 064,  
005  
044, 082, 064,  
094  
027, 064, 058,  
065, 066, 063,  
067  
Realistic  
024, 063, 036,  
067, 040, 027  
Magnavox  
031, 023, 024,  
086  
20  
 
Remote Programming  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
• If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 22.  
• After you program your remote, some DVD buttons may not work properly. If so, use the DVD  
player’s remote.  
DVD Player  
Aiwa  
CODES  
043  
DVD Player  
RCA  
CODES  
021, 026  
Apex  
040  
Sampo  
Samsung  
Sharp  
034  
030  
028  
038  
Denon  
Hitachi  
JVC  
020, 037  
030, 031  
000  
Silvania  
Sony  
Kenwood  
Konka  
035  
024, 045, 046,  
047  
039  
Mitsubishi  
Onkyo  
Oritron  
Panasonic  
Philips  
Pioneer  
Raite  
025  
Technics  
Toshiba  
Vialta  
020  
041  
023  
044  
050  
020  
Wave  
042  
023, 036  
022  
Yamaha  
Zenith  
020  
027, 032  
033  
21  
 
Remote Programming  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press and hold down the POWER button, then press the RETURN+ button for more than three  
seconds.  
3) Release the RETURN+ button, then release the POWER button.  
4) Press the POWER button on the remote, and see if the cable or satellite box responds.  
5) If there was a response, press RETURN+. The codes are now set. If there was no  
response, repeat Step 4. If you repeat Step 4 a total of 52 times without a response, use the  
remote control that came with your equipment.  
6) Press RETURN+ to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or  
“DVD”.  
2) Press and hold down the VCR or DVD POWER button, then press the RETURN+ button for  
more than three seconds.  
3) Release the RETURN+ button, then release the VCR or DVD POWER button.  
4) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
5) If there was a response, press RETURN+. The codes are now set. If there was no  
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
6) Press RETURN+ to exit.  
22  
 
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–  
buttons let you:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
• Scan through TV channels (when not in a menu screen)  
® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right  
to:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
• Turn the volume up or down (when not in a menu screen)  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping hand” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item  
that appears in yellow is the one currently selected. If you press the MENU button again, the  
onscreen display will skip to the next menu screen. If you use the Menu button on the TV’s  
front panel instead of the remote, an additional menu screen showing input will appear. The  
“interactive plug-in menu” will appear the first time the TV is plugged in.  
I N I T I A L  
S E T U P  
P R E V I O U S  
A U T O T U N E R S E T U P  
C H A N N E L S U M M A R Y  
V – C H I P  
S E T L O C K C O D E  
N E X T P A G E  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Notes:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically shut  
off.  
23  
 
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. Examples of the Onscreen  
Menus are shown below. Detailed explanations on using each menu follow later in this guide.  
For information about the interactive plug-in Menu, see pages 16 - 18.  
Press the MENU button  
I N I T I A L  
S E T U P  
I N I T I A L  
S E T U P  
P R E V I O U S  
L A N G U A G E  
P R E V I O U S  
E N G . F R A N . E S P.  
A U T O T U N E R S E T U P  
C H A N N E L S U M M A R Y  
V – C H I P  
C L O S E D C A P T I O N  
F R O N T P A N E L L O C K  
A U T O S H U T O F F  
X D S I D  
O F F  
O F F  
O N  
S E T L O C K C O D E  
N E X T P A G E  
N E X T P A G E  
S E L E C T  
B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
INITIAL SETUP 01  
INITIAL SETUP 02  
C L O C K /  
T I M E R S  
P I C T U R E  
A D J U S T  
P R E V I O U S  
T I N T  
P R E V I O U S  
S T A N D A R D  
S E T C L O C K  
O N / O F F T I M E R  
C O L O R  
P I C T U R E  
B R I G H T  
D E T A I L  
C O L O R T E M P E R A T U R E  
N E X T P A G E  
L O W  
0
N E X T P A G E  
S E L E C T  
B Y  
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
CLOCK/TIMERS  
PICTURE ADJUST 01  
S O U N D  
A D J U S T  
P I C T U R E  
A D J U S T  
P R E V I O U S  
P R E V I O U S  
N O I S E M U T I N G  
V S M  
S T A N D A R D  
B A S S  
O N  
O N  
T R E B L E  
B A L A N C E  
M T S  
S T E R E O S A P M O N O  
N E X T P A G E  
N E X T P A G E  
0
R E S E T B Y  
S E L E C T  
B Y  
0
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
SOUND ADJUST  
PICTURE ADJUST 02  
24  
 
Initial Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 18 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
I N I T I A L S E T U P  
>
A U T O T U N E R S E T U P  
π†  
®  
®  
To AUTO TUNER SETUP  
To operate  
T U N E R M O D E  
C A B L E  
To choose CABLE or AIR  
To move to START  
S T A R T  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
®  
To start Auto Tuner Setup  
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the  
message PROGRAMMING OVER! appears onscreen.  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV. You  
can add or delete channels from the line-up or prevent any unauthorized viewers from watching  
any or all 181 channels.  
Press the MENU button  
π†  
To CHANNEL SUMMARY  
To operate  
®  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. You can  
delete channels from the scan by removing the “”. If any  
channels were missed during auto tuner setup and you  
wish to add them, you may by placing an “” next to the  
channel number.  
I N I T I A L S E T U P  
C H A N N E L S U M M A R Y  
>
I
I
I
I
I
I
C
H
N
O
S
C
A
N
C
H
N
O
.
S
C
A
N
1
2
3
4
5
6
7
8
9
1 0  
π†  
To the SCAN column  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
®  
To include or delete from scan  
Press the EXIT button when finished  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the EXIT button when finished  
25  
 
Initial Setup  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
Lock Code using the 10 key pad.  
If the wrong code is entered, the message  
“INVALID LOCK CODE!” will flash on the screen.  
THIS CHANNEL IS LOCKED BY  
CHANNEL GUARD.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
The channel cannot be accessed until the correct code  
is entered.  
NO. - - - -  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 32.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 27 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any  
or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each  
of the three V-Chip formats appear in the next six pages along with descriptions of the rating  
categories.  
To access the rating categories:  
I N I T I A L S E T U P  
>
V – C H I P  
Press the MENU button  
V – C H I P  
O F F  
S E T U S T V R A T I N G S  
S E T M O V I E R A T I N G S  
π†  
®  
To V-CHIP  
To operate (Lock icon  
will appear)  
S E T C A N A D I A N R A T I N G S E N G  
S E T C A N A D I A N R A T I N G S F R E  
U N R A T E D  
V I E W  
Press ZERO to access the V-Chip menu  
F I N I S H  
®  
To turn V-Chip ON or OFF (V-Chip must be  
turned ON for rating settings to operate)  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
π†  
To move to SET US TV RATINGS,  
SET MOVIE RATINGS, or SET CANADIAN RATINGS (see following pages for  
descriptions of each item)  
26  
 
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
I N I T I A L S E T U P  
>
V – C H I P  
Press the MENU button  
V – C H I P  
O F F  
π†  
To V-CHIP  
S E T U S T V R A T I N G S  
S E T M O V I E R A T I N G S  
®  
To operate (The lock icon  
appears)  
S E T C A N A D I A N R A T I N G S E N G  
S E T C A N A D I A N R A T I N G S F R E  
U N R A T E D  
V I E W  
Press ZERO to access V-Chip setup options  
F I N I S H  
π†  
To UNRATED  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
®  
To VIEW or BLOCK  
Press EXIT when done  
27  
 
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be  
able to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or  
no violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
28  
 
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
I N I T I A L S E T U P  
>
V – C H I P  
V – C H I P  
O F F  
π†  
®  
To V-CHIP  
To operate (lock icon  
S E T U S T V R A T I N G S  
S E T M O V I E R A T I N G S  
appears)  
S E T C A N A D I A N R A T I N G S E N G  
S E T C A N A D I A N R A T I N G S F R E  
Press ZERO to access the V-Chip menu  
U N R A T E D  
V I E W  
®  
π†  
®  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
To operate  
F I N I S H  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the or to move the cursor to the correct location. Press or to turn the locking  
feature on or off. An item is locked if the icon appears instead of a “—”.  
π
®
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
π†  
®  
π†  
®  
To the TV 14 Column  
To turn on the lock  
To FINISH  
To save settings and exit  
Press the EXIT button when finished  
Note:  
• If you want to change the setup, move the cursor to the top column and change the lock icon  
to “—” by pressing or again. You may then select individual categories to block.  
®
29  
 
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur  
producers who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating  
may include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (Lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET MOVIE RATINGS  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
I N I T I A L S E T U P  
S E T M O V I E R A T I N G S  
>
V – C H I P  
>
π†  
®  
π†  
To the X Column  
N
P
X
R
PG  
G
NR  
C-17  
G-13  
To turn on the lock  
To the NC-17 Column  
To turn on the lock  
F I N I S H  
®  
π†  
®  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
To FINISH  
To save settings and exit  
Press the EXIT button when finished  
30  
 
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens  
and early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
For example:  
To block viewing of programming rated 14+ and 18+:  
I N I T I A L S E T U P  
S E T M O V I E R A T I N G S  
>
V – C H I P  
>
π†  
®  
To the 18+ Column  
To turn on the lock  
P
C
G
C
14+  
18+  
G
8
π†  
®  
π†  
To the 14+ Column  
To turn on the lock  
To FINISH  
F I N I S H  
S E L E C T  
B Y  
®  
To save settings and exit  
Press the EXIT button when finished  
E X I T  
E X I T B Y  
O P E R A T E B Y  
31  
 
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
To change the lock code, follow the steps below.  
Press the MENU button  
I N I T I A L S E T U P  
>
S E T L O C K C O D E  
L O C K C O D E  
F I N I S H  
π†  
To SET LOCK CODE  
To operate (lock icon  
®  
appears)  
0 0 0 0  
Press ZERO to access the lock code  
The first digit will be highlighted  
S E L E C T  
B Y  
E X I T  
E X I T B Y  
O P E R A T E B Y  
®  
π†  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
π†  
To FINISH  
®  
To save settings and exit  
(your lock code is now set)  
Press the EXIT button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
32  
 
Initial Setup  
Language  
The language function is described on page 16 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
I N I T I A L  
S E T U P  
Press the MENU button  
P R E V I O U S  
π†  
To LANGUAGE  
L A N G U A G E  
E N G . F R A N . E S P.  
C L O S E D C A P T I O N  
F R O N T P A N E L L O C K  
A U T O S H U T O F F  
X D S I D  
®  
To choose a language: ENG. (English), FRAN.  
(French) or ESP. (Spanish)  
O F F  
O F F  
O N  
Press the EXIT button when finished  
N E X T P A G E  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below.  
Press the MENU button  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To operate  
To select CAPTION or TEXT  
To select a caption (CC1 to CC4) or text  
channel (T1 to T4)  
I N I T I A L S E T U P  
C L O S E D C A P T I O N  
>
C A P T I O N  
T E X T  
C C 1  
T 1  
π†  
®  
To accept that selection and move to FINISH  
To save settings and exit  
F I N I S H  
S E L E C T  
B Y  
Press the EXIT button when finished  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 43.  
33  
 
Initial Setup  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
π†  
®  
To FRONT PANEL LOCK  
To turn ON or OFF  
Press the EXIT button when finished  
You can turn off this feature in the following ways:  
• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your  
remote control.  
• Use the remote control.  
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button on the front of the TV for more than 3  
seconds. This feature will remain ON.  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the TV is  
on.  
Press the MENU button  
π†  
®  
To AUTO SHUT OFF  
To turn ON or OFF  
Press the EXIT button when finished  
• If the channel that you have on does not receive a signal for more than one minute, the  
blinking text “NOT RECEIVING A SIGNAL” appears on the screen, and starts the countdown.  
If no signal is being received within 10 minutes, the TV shuts itself off.  
XDS ID  
XDS ID Display provides a channel’s call letters, the network’s name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
Press the MENU button  
π†  
®  
To XDS ID  
To turn ON or OFF  
Press the EXIT button when finished  
34  
 
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Adjust the Picture Settings  
Press the MENU button  
P I C T U R E  
A D J U S T  
π†  
To TINT, COLOR, PICTURE, BRIGHT or  
DETAIL  
P R E V I O U S  
T I N T  
S T A N D A R D  
C O L O R  
®  
®  
π†  
To enter  
To adjust the setting  
To move to the next setting  
P I C T U R E  
B R I G H T  
D E T A I L  
C O L O R T E M P E R A T U R E  
N E X T P A G E  
L O W  
0
R E S E T B Y  
S E L E C T  
B Y  
Press the EXIT button when finished  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Note:  
• If you press the 0 button, you can reset the setting to the factory default setting.  
35  
 
Picture Adjust  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
P I C T U R E  
A D J U S T  
P R E V I O U S  
T I N T  
π†  
®  
®  
To COLOR TEMPERATURE  
To enter  
S T A N D A R D  
C O L O R  
P I C T U R E  
To set LOW or HIGH  
B R I G H T  
D E T A I L  
Press the EXIT button when finished  
C O L O R T E M P E R A T U R E  
N E X T P A G E  
L O W  
0
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Note: If you press the 0 button, you can reset the setting to the factory default setting.  
Noise Muting  
This feature inserts a blank blue screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Press the MENU button  
P I C T U R E  
A D J U S T  
P R E V I O U S  
N O I S E M U T I N G  
V S M  
S T A N D A R D  
π†  
To NOISE MUTING  
O N  
O N  
®  
To turn noise muting ON or OFF  
Press the EXIT button when finished  
N E X T P A G E  
0
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Note:  
• Noise muting will not work during auto tuner setup or when you operate channel summary.  
(VSM) Velocity Scan Modulation  
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help  
accentuate the differences in picture brightness to sharpen the edges of images.  
Press the MENU button  
P I C T U R E  
A D J U S T  
P R E V I O U S  
N O I S E M U T I N G  
V S M  
S T A N D A R D  
π†  
®  
®  
To VSM  
O N  
O N  
To enter  
To turn VSM ON or OFF  
N E X T P A G E  
0
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Note: If you press the 0 button, you can reset the  
setting to the factory default setting.  
36  
 
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
S O U N D  
A D J U S T  
π†  
®  
π†  
To BASS, TREBLE or BALANCE  
To adjust the setting  
P R E V I O U S  
B A S S  
T R E B L E  
B A L A N C E  
M T S  
To move to the next setting  
S T E R E O S A P M O N O  
Press the EXIT button when finished  
N E X T P A G E  
0
R E S E T B Y  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Note:  
• If you press the 0 button, you can reset the setting to the factory default setting.  
MTS (Multi-Channel Television Sound)  
MTS technology allows several audio signals to be broadcast at once, giving you a choice  
in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
Press the MENU button  
π†  
To MTS  
®  
Select the mode  
(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).  
Press the EXIT button when finished  
Notes:  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
37  
 
Clock/Timers  
Set Clock  
The set clock function is described on page 17 as the interactive plug-in menu. You can choose  
to set the clock automatically, or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
To SET CLOCK  
To operate  
®  
When you set the clock automatically, choose AUTO by pressing the  
or  
®
arrows.  
π†  
®  
π†  
®  
To TIME ZONE  
C L O C K / T I M E R S  
S E T C L O C K  
>
To select your time zone  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
To FINISH  
M O D E  
A U T O  
T I M E Z O N E  
D . S . T .  
P A C I F I C  
O F F  
F I N I S H  
S E L E C T  
B Y  
®  
To save settings  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Press the EXIT button when finished  
When you set the clock manually, choose MANUAL by pressing the  
or  
®
arrows.  
π†  
®  
π†  
®  
To move to the hour  
To set the hour  
C L O C K T I M E R S  
S E T C L O C K  
>
To move to minutes  
To set the minutes  
To START CLOCK  
To operate  
M O D E  
M A N U A L  
T I M E  
– – : – – – –  
®  
S T A R T C L O C K  
B Y  
S E L E C T  
E X I T  
E X I T B Y  
O P E R A T E B Y  
THANK YOU !!  
Notes:  
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.  
The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will  
move back one hour at 2:00 am on the last Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
38  
 
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Press the MENU button  
C L O C K / T I M E R S  
>
O N / O F F T I M E R  
π†  
®  
®  
To ON/OFF TIMER  
O N T I M E  
7 : 0 0 P M  
1 0 : 0 0 P M  
0 2  
O F F T I M E  
C H A N N E L  
O N V O L U M E  
M O D E  
To operate (begins with ON TIME)  
C U R R E N T  
E V E R Y D AY  
N O  
To set the hour (AM/PM) you want the TV to turn  
on  
O N / O F F T I M E R  
F I N I S H  
S E L E C T  
B Y  
®  
To move to minutes  
To set the minutes  
E X I T  
E X I T B Y  
O P E R A T E B Y  
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the  
OFF TIME the same way as ON TIME  
®  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
®  
To set the volume level  
To move to MODE  
®  
Choose ONCE or EVERYDAY  
®  
To ON/OFF TIMER  
Choose YES to accept the timer setting, choose NO if you don’t wish to accept  
To FINISH  
®  
To save settings  
Press the EXIT button when finished  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
39  
 
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 7:  
0 (Zero)  
7 (Seven)  
100+ Button  
Use the 100+ button to directly access channels above channel 99. For example, to move to  
channel 124, press 100+, 2 (Two), 4 (Four).  
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to recieve.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous level,  
press MUTING again.  
Menu  
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
Exit  
Use this button to enter or exit the TV’s onscreen menus.  
40  
 
Button Functions  
Return +  
The RETURN+ button has two functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the channels  
using the CH+ and CH– buttons.  
RETURN+ and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED!  
The channel currently active has been programmed as your return+ channel. Now scan through  
the channels using the CHANNEL+/– buttons.  
RETURN+  
You will return to your programmed channel.  
To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The  
message “RETURN CHANNEL CANCELLED!” will appear.  
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.  
Input  
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or  
V2-Component or Video-3 for video devices like VCR’s, DVD players, or camcorders.  
Press the INPUT button  
TV  
VIDEO-1  
VIDEO-2  
V2-COMPONENT  
VIDEO-3  
Note:  
You can also access the input menu screen by using the MENU button on the front of the TV  
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST  
screen. Choose the INPUT by pressing MENU  
on the front panel and select TV or VIDEO  
).  
INPUT by using the CHANNEL +/- buttons ( OPERATE  
®
41  
 
Button Functions  
Display  
The display screen shows the current status of timers, inputs, and XDS ID.  
Press the DISPLAY button  
The screen to the right shows the following information:  
07 KLVX PBS  
JAZZ FESTIVAL  
NOW  
• The current channel or AV input (Channel 07)  
• The current time (12:20 pm)  
• Sleep timer status/minutes remaining (The Sleep Timer  
is off)  
• On/off timer status (Set to turn on everyday at 7:00 PM,  
off at 10:00 PM)  
12 : 20 PM  
OFF  
SLEEP TIMER  
ON/OFF TIMER  
ON TIME  
EVERYDAY  
7 : 00 PM  
10 : 00 PM  
OFF TIME  
• Each Press of the DISPLAY button changes the display  
mode  
Display  
Time  
Channel  
Off  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock, sleep timer or on/off timer are not set, the display screen will show:  
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals  
of 15 minutes, for a total time of up to 180 minutes.  
Press the SLEEP TIMER button  
0 15 30 45 60 75 90 105 120 135 150 165 180  
Sleep Timer Message  
20 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT!!  
PUSH SLEEP TIMER BUTTON  
TO EXTEND  
You then have 20 seconds to press the sleep timer button to delay the shut off for another  
15 minutes.  
42  
 
Button Functions  
Sound  
The SOUND button give you a choice of two sound effects.  
Hyper Surround - Creates a deep, three-dimensional sound effect by channeling the audio  
through the TV’s front-firing speakers.  
BBE - BBE high definition audio adds natural, clear and extraordinary sound quality to any  
program.  
Press the SOUND button  
S O U N D E F F E C T  
π†  
To select HYPER SURROUND or BBE  
To choose the setting  
H Y P E R S U R R O U N D  
B B E  
O F F  
O N  
®  
S E L E C T  
B Y  
E X I T  
O P E R A T E B Y  
E X I T B Y  
Press the EXIT when finished  
Note: BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from  
BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from  
BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
OFF  
CAPTION  
TEXT  
• See page 33 when you set the caption/text mode.  
43  
 
Button Functions  
Video Status  
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
STANDARD - Resets the picture display to the factory settings.  
DYNAMIC - Heightens contrast.  
THEATER - Gives a rich, film-like look to video when viewing in a dimly lit room.  
GAME - Used for when you are playing video games connected to your TV.  
Press the VIDEO STATUS button  
By every press of the video status button, you change the mode.  
STANDARD  
DYNAMIC  
THEATER  
GAME  
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the film  
to video editors intended it to be.  
Press the THEATER PRO button  
Aspect  
This adjusts the dimensions of the film or movie you are watching so that the image doesn’t  
look stretched or squashed together.  
Press the ASPECT button  
ASPECT  
16:9 4:3  
Light  
Your remote control includes illuminated buttons for key features like Channel +/– and  
Volume +/–. Press the LIGHT button to turn the illumination on for 4 seconds.  
44  
 
Button Functions  
TV/CATV Slide Switch  
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to  
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
• See page 19 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 20.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 21.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and  
power off.  
Move the selector switch to VCR to operate.  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 20.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on, and power off.  
Move the selector switch to DVD to operate.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 21.  
45  
 
Troubleshooting  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
There is no picture  
or sound  
• The antenna could be disconnected.  
• The input mode could be set improperly. See page 41.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 25.  
• The TV station may be having difficulties. Check to see if other stations are working.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• Check that the TV/CATV switch is in the proper position.  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 25.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 26.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 39.  
• Check to see if the Sleep Timer was set. See page 42.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 38.  
• There is a problem with the TV. Unplug the set and call for service.  
The On Timer is  
blinking  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 35.  
• The Video Status mode may be turned to the wrong setting. See page 44.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 33.  
Stereo or bilingual  
programs can't be  
heard  
• Make sure the MTS settings are correct. See "MTS" on page 37.  
There is no picture  
being displayed for  
INPUT-2  
• Check your AV Cables to make sure they are connected tightly and properly.  
• In case you are connecting using component cables to V2, make sure you select  
"V2-COMPONENT" by pressing the INPUT button. See page 13 and 41.  
• In case you are connecting using composite cables to V2, make sure you select  
"VIDEO-2" by pressing the INPUT button. See page 13 and 41.  
• The Ol mark will appear if you press the ASPECT button under this condition: While  
noise muting is on over channels which are not broadcasting or are too weak to be  
received.  
l
O mark appears  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless  
crackling sounds the sound or picture become abnormal, this is fine.  
46  
 
Warranty  
For Canadian model televisions, see the separate sheet for Canadian  
Warranty information.  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth  
below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE  
MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period  
shown below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)  
Parts  
Labor  
1 YEAR  
1 YEAR  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE  
DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective within the warranty period, JVC will repair or  
replace defective parts at no charge to the original owner. Such repair and replacement  
services shall be rendered by JVC during regular business hours at JVC authorized  
service centers. Parts used for replacement are warranted only for the remainder of this  
Warranty Period. All products and parts thereof may be brought to a JVC authorized  
service center on a carry-in basis. Televisions with a screen size of 25 inches and larger  
may be covered on an in-home basis where such service is available.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
To determine if in-home service is available in your area, either contact the selling dealer  
(retailer) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service  
available, will require clear access to the Television by the service representatives. If in-home  
service is not available, carry in service will be provided.  
If service is not locally available, box the product carefully, preferably in its original  
carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of  
the problem to the nearest JVC Factory Service Center, the name and location which will  
be given to you by the toll free number.  
If you have any questions concerning your JVC Product, please contact our Customer  
Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1) Products which have been subject to abuse, accident, alteration, modification,  
tampering, negligence, misuse, faulty installation, lack of reasonable care, or if  
repaired or serviced by anyone other than a service facility authorized by JVC to  
render such service, or if affixed to any attachment not provided with the products,  
or if the model or serial number has been altered, tampered with, defaced or  
removed;  
2) Initial installation, installation and removal from “built-in” entertainment centers and  
other mounting systems;  
3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video  
and audio head cleaning;  
4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;  
5) Signal reception problems and failures due to line power surge;  
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90  
days from the date of purchase;  
47  
 
Warranty  
7) Accessories;  
8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of  
purchase.)  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY  
OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY  
HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT,  
INCONVENIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR  
CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS  
OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING  
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,  
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or  
limitations on how long the warranty lasts, so these exclusions or limitations may not  
apply to you. This warranty gives you specific legal rights and you may also have other  
rights which vary state to state.  
JVC COMPANY OF AMERICA  
1700 Valley Road  
DIVISION OF JVC AMERICAS CORP.  
Wayne, New Jersey 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY  
DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.  
PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or  
side of the cabinet.  
Retain this information for future reference.  
Model No.:  
Serial No.:  
Purchase Date:  
Name Of Dealer:  
48  
 
Authorized Service Centers  
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1 (800) 537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase, please read the  
instruction booklet before operating the unit. In the event that repairs are necessary,  
please call 1 (800) 537-5722 for your nearest authorized servicer or visit our website  
Remember to retain your Bill of Sale for Warranty Service.  
Do not service the television yourself  
Caution  
To prevent electrical shock, do not open the cabinet. There are no user serviceable  
parts inside. Please refer to qualified service personnel for repairs.  
Accessories  
To purchase accessories for your JVC product, please call toll free:  
1 (800) 882-2345 or on the web at www.JVC.com  
49  
 
Specifications  
MODEL  
AV-32F734  
AV-27F734  
Reception  
Format  
NTSC, BTSC System (Multi-Channel Sound)  
VHF 2 to 13, UHF 14 to 69  
Sub Mid, Mid, Super, Hyper and Ultra bands  
(181 channel frequency synthesizer system)  
Reception  
Range  
Power Source  
AC 120V, 60Hz  
Power  
Consumption  
160W  
140W  
Screen Size  
32 inch / 80 cm  
measured diagonally  
full square  
27 inch / 68 cm  
measured diagonally  
full square  
Audio Output  
Speakers  
5W + 5W  
2 x 4 3/4 inch / 5 x 12 cm oval x 2  
Antenna  
Terminal  
75 ohms (VHF/UHF) (F-type connector)  
External Input  
Jacks  
Video: 1 Vp-p, 75 ohms  
Audio: 500mVrms (-4dBs) high impediance  
S-Video Input  
Jack  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Component  
Input Jacks  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p, 75 ohms  
Audio Output  
Jacks (FIX)  
FIX: 500 mVrms (-4dBs) Low impedance (400 Hz when modulated 100%)  
3.5 mm mini jack x 1  
AV Compu Link  
III Jack  
Dimensions (In)  
WxHxD (cm)  
34 5/8 x 27 5/8 x 22 1/4  
87.7 x 69.9 x 56.5  
29 7/8 x 23 3/8 x 19 3/4  
75.8 x 59.3 x 50.0  
Weight (lbs / kg)  
Accessories  
140.8 / 64  
94.6 / 43  
Remote control unit x 1 / AA batteries x 2  
Specifications subject to change without notice.  
50  
 
Notes  
51  
 
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
 

Ingersoll Rand Cordless Sander 77A Series User Manual
Insignia DVD Player NS 9DPDVD User Manual
Intel Modem 537EX User Manual
iSimple Automobile Accessories ISGM533 User Manual
Jensen MP3 Docking Station JIPS 290I User Manual
JVC Digital Camera AX V55BK User Manual
JVC Speaker System CA MXKA3 User Manual
Kenwood Speaker System KFC X1720P User Manual
Kompernass Clock KH 2001 User Manual
Konica Minolta Digital Camera DiMAGE X31 User Manual