JL Audio Car Speaker SB B 3SER CPE SDN 13TW5 User Manual

SB-B-3SER/CPE/SDN INSTR_SKU# 011256  
InstallatIon  
d I F F I C u lt Y :  
If you choose to perform the installation yourself, it is absolutely vital that  
the Stealthbox® be properly mounted to the vehicle according to these  
instructions. Failure to mount the enclosure properly presents two problems:  
out  
oF  
I n s t a l l a t I o n G u I d e  
for the  
1) The sub-bass performance will suffer due to the movement of the enclosure  
caused by the force exerted by the woofer(s).  
15  
SB-B-3SER/CPE/SDN(E90\92)  
2) A loose enclosure presents a serious safety hazard in the event of a collision  
or sudden deceleration.  
estImated tIme:  
30 mIn  
sKu#94281  
2006-up sedan  
2007-up Coupe  
s t e P  
1
Remove anything stored in the trunk so that you are working  
in a clean environment.  
unpack the stealthboand test for proper operation  
before continuing!  
The wiring for the Stealthbox® should go from the seam  
between the seatback and the floor to the amplifier location.  
Along the bottom of the rear deck from the trunk, there are  
two recessed areas (as indicated by arrows at left) with two  
bolts going up into the deck in each recess.  
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper  
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.  
s t e P  
2
The outer-most bolt in each recess must be removed.  
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio  
dealer. The installation professionals employed by your dealer have the necessary tools and experience  
to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage  
extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you  
prefer to perform your own installation, please read this installation guide completely  
before beginning the process.  
s t e P  
3
Using each of the black oxide 3/8"-16 x 1 1/2" bolts assemble  
a split lock washer, flat washer, bracket, 1" spacer, through the  
hole in the bracket (the slot will mount the Stealthbox® to  
the bracket).  
Continued on Next Page  
 

Intel Server S5400SF User Manual
Intel Tablet P0715 User Manual
IOGear Switch GCS1774 User Manual
JAI Camcorder TM 1020 User Manual
JBL Music Mixer SAM12X User Manual
Jenn Air Oven JMW9330DAB User Manual
Johnson Controls Heating System AHE User Manual
JVC CD Player XM EX90 User Manual
KitchenAid Microwave Oven 4452300B User Manual
KitchenAid Refrigerator 2316565C User Manual