Insignia CRT Television NS 42E480A13 User Manual

Front
features  
Using an AV cable (good)  
Connecting a DVD or Blu-ray player, cable box,  
satellite receiver, camcorder, or game station  
Using an HDMI cable (best)  
MENU  
INPUT  
MENU  
INPUT  
VOLUME  
VOLUME +  
VOLUME-  
42"1080p LED TV  
CHANNEL  
V
CHANNEL  
QUICK SETUP GUIDE  
CHANNEL V  
NS-42E480A13  
Remote sensor  
Power indicator  
Installing the stand  
Thank You  
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from  
damages and scratches.  
for purchasing this fine Insignia television.  
We hope you enjoy the quality and reliability of this  
product for years to come.  
2 Align the front of the stand column  
with the front of the base, then  
insert the stand column into the  
base making sure that the groove  
in the stand column aligns with  
the ridge in the base. Secure the  
stand column to the base with  
three M5 x 12 mm screws  
_______________________________  
Groove  
Ridge  
(provided).  
AUDIO/VIDEO  
OUT  
Stand column  
Stand cover  
3 Align the stand cover with the  
stand column, then secure the  
stand cover to the stand column  
with one M5 x 12 mm screw  
(provided). Make sure that the  
bottom of the stand cover is flush  
against the top of the stand  
column.  
+
Remote control  
and 2 AAA  
Stand cover  
batteries  
Stand column  
Back View  
Note: Cable is not provided.  
4 Secure the stand cover to  
the TV screen using four  
M5 x 12 mm screws  
(provided).  
Note: Cable is not provided.  
Using component cables (better)  
Base plate  
Connecting an antenna/cable wall jack  
Connect a coaxial cable (not included) to the ANT/CABLE jack on the back side  
of your TV and to the antenna/cable wall jack.  
M5 screws (12 mm length) (8)  
Installing a wall-mount bracket  
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and  
scratches.  
2 Insert four spacers (provided) into the corresponding bracket screw  
Warning  
holes on the back of your TV, then attach the wall-mount bracket to  
Spacers (4)  
your TV using four M6 x 25 screws (provided) or the screws/spacers  
This apparatus is intended to be  
provided with the wall-mount bracket. See the instructions that  
came with the wall-mount bracket for screw/washer configurations  
supported by a UL Listed  
and information on how to correctly hang your TV.  
wall-mount bracket.  
Identifying cables  
Your TV has several connection types for connecting devices. For the best video quality,  
connect a device to the best available connection.  
M6 spacer screws (25 mm length) (4)  
AUDIO/VIDEO  
OUT  
Connection type  
Cable connector  
Video quality  
Best  
WE ARE GOING GREEN!  
A copy of your User Guide is not provided in  
the box but is available online.  
HDMI video/audio  
OR  
CABLE  
Support & Service, enter your model  
number in the Product Search field,  
then click Search.  
Better  
Note: Cables are not provided.  
Component video  
and analog audio  
OR  
Good  
Composite video  
and analog audio  
Note: Cable is not provided.  
You can use the HDMI 3/DVI jack to connect a DVI device to your TV. You need to attach an  
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.  
 

Indesit Freezer BA 13 GF User Manual
Ingersoll Rand Heat Pump 650501 B User Manual
Intel Computer Hardware AW8D User Manual
Jenn Air Microwave Oven JMW2327W User Manual
Juniper Networks Network Router 710008 001 User Manual
JVC Battery Charger BH VC20U User Manual
JVC Camera Accessories KA R25U User Manual
Kenwood Stereo System VR 8060 User Manual
Kodak Camera Accessories M522 User Manual
Korg Music Mixer ZERO4 User Manual